Cycle Computer For Luddite
#26
Senior Member
#27
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
#28
vespertine member
Join Date: Jul 2013
Location: Land of Angora, Turkey
Posts: 2,476
Bikes: Yes
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 687 Post(s)
Liked 220 Times
in
163 Posts
Good question! I've never actually run it the whole way down - I usually recharge it before a long ride. I've left it running in the neighborhood of 11 hours on some pokey gravel rides, and it was nowhere near close to needing recharged.
IME, fine for century and 200K type stuff.
IME, fine for century and 200K type stuff.
#29
I'm the anecdote.
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,822
Bikes: '12 Schwinn, '13 Norco
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times
in
795 Posts
Stem Captain has a series of one function Cycle Computers for Luddites.
Before you ride you decide if you need the clock function, the temperature function, or the compass function. The one function inserts are easy to move from bike to bike.
Mapping function is provided by a folding piece of paper in your back pocket, available separately.
-mr. bill
Before you ride you decide if you need the clock function, the temperature function, or the compass function. The one function inserts are easy to move from bike to bike.
Mapping function is provided by a folding piece of paper in your back pocket, available separately.
-mr. bill
ETA: I'm diggin' that thermometer, too. I could pretend it's a speedometer to satisfy my inner motorcyclist.
ETA again: Arrrgh, my alloy bike has a steel fork and steerer. So, that compass is out.
Last edited by FiftySix; 01-19-20 at 02:56 PM.
#31
Senior Member
I used a Lezyne Macro all of last year, and I was happy with it. The main reason I wen to a GPS device was that I wanted to manage my heart rate, and the lowest cost Cateye with HR got lousy reviews. I use a Wahoo Tickr Fit HRM and a Wahoo Blue SC speed/cadence sensor. The Macro and its replacement and the Macro Easy don't have ANT+, but I have no ANT+ sensors.
I looked at Bryton, Igpsport, and Wahoo Mini. I went for the Lezyne because I thought US support would be better than Taiwan-based support. (If I were on Taiwan, I'd have preferred Bryton.) Th Mini without a phone is an overpriced basic wireless computer. Dcrainmaker reviewed the Mini, if you're interested.
If I didn't want HR or directions from my bike 'puter, I'd go for a wired 'puter from Cateye, Sigma, or Planet Bike. I used a Cateye Solar for decades, and it still works.
If you go with something from Sigma, make very sure your 'puter is firmly in the mount.
I looked at Bryton, Igpsport, and Wahoo Mini. I went for the Lezyne because I thought US support would be better than Taiwan-based support. (If I were on Taiwan, I'd have preferred Bryton.) Th Mini without a phone is an overpriced basic wireless computer. Dcrainmaker reviewed the Mini, if you're interested.
If I didn't want HR or directions from my bike 'puter, I'd go for a wired 'puter from Cateye, Sigma, or Planet Bike. I used a Cateye Solar for decades, and it still works.
If you go with something from Sigma, make very sure your 'puter is firmly in the mount.
#32
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
#33
Callipygian Connoisseur
Join Date: Nov 2008
Posts: 1,373
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 564 Post(s)
Liked 350 Times
in
190 Posts
Seriously? All this talk about GPS and phone pairing and heart rate monitoring when he needs nothing more than a basic cheapo (which is what he said he wanted).
About $50 bucks will get you a wireless Cateye Padrone. They last forever (with simple battery changes) and have nice big numbers for old eyes. I’ve been a Cateye consumer since the 90’s. They’re durable, accurate, and easy to mount. No, they’re not $15 throw aways, but had you bought a $40 wireless Vector like I did about a decade ago it would still be getting it done just like mine. I went to the Padrone for the larger text and fully expect it will last and perform as well as the others.
-Kedosto
About $50 bucks will get you a wireless Cateye Padrone. They last forever (with simple battery changes) and have nice big numbers for old eyes. I’ve been a Cateye consumer since the 90’s. They’re durable, accurate, and easy to mount. No, they’re not $15 throw aways, but had you bought a $40 wireless Vector like I did about a decade ago it would still be getting it done just like mine. I went to the Padrone for the larger text and fully expect it will last and perform as well as the others.
-Kedosto
Likes For Kedosto:
#34
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4560 Post(s)
Liked 2,802 Times
in
1,800 Posts
Seriously? All this talk about GPS and phone pairing and heart rate monitoring when he needs nothing more than a basic cheapo (which is what he said he wanted).
About $50 bucks will get you a wireless Cateye Padrone. They last forever (with simple battery changes) and have nice big numbers for old eyes. I’ve been a Cateye consumer since the 90’s. They’re durable, accurate, and easy to mount. No, they’re not $15 throw aways, but had you bought a $40 wireless Vector like I did about a decade ago it would still be getting it done just like mine. I went to the Padrone for the larger text and fully expect it will last and perform as well as the others.
-Kedosto
About $50 bucks will get you a wireless Cateye Padrone. They last forever (with simple battery changes) and have nice big numbers for old eyes. I’ve been a Cateye consumer since the 90’s. They’re durable, accurate, and easy to mount. No, they’re not $15 throw aways, but had you bought a $40 wireless Vector like I did about a decade ago it would still be getting it done just like mine. I went to the Padrone for the larger text and fully expect it will last and perform as well as the others.
-Kedosto
Bluetooth and ANT+ sensors enable mounting on the rear wheel, so we can monitor while on an indoor trainer. Many old style wireless bike computers have limited range and require the magnet and sensor to be mounted on the front wheel/fork. There are Bluetooth/ANT+ induction type sensors that attach to the crank or hub with rubber bands -- no magnets needed. And ANT+ can share to more than one device, which is helpful for recording to multiple devices, or so a coach can monitor the rider's data if wanted.
For $25-$50, we can buy a basic GPS computer like the XOSS G+ I mentioned above. It does everything the CatEye Padrone does, and more... if the owner wants it. And it works with my existing ANT+ only, and Bluetooth/ANT+ sensors. It pairs quicky, easily and more reliably than my phones, which often take a minute or two to pair with sensors.
Add another $25-$30, and you can buy a Lezyne or Bryton for around $75-$80 that includes active GPS navigation aids -- breadcrumb trails, handy for folks who explore new routes on the road or off-road; even simple direction finding aids, like a graphic map or compass to replace the old ball-in-fluid compass (yup, I still have one) or, better still, my old orienteering compass and navigation aids I'd kept from the 1970s when I practiced orienteering in the hills of Camp Pendleton where I was stationed, and exploring the Cleveland National Forest alone, often after dark. That's amazing technology for about the same money as an orienteering compass and a couple of family radio service transceivers. Especially for someone like me, who has zero natural sense of direction, which is why I learned orienteering.
And those GPS bike computers have much longer runtime between charges than most cell phones. And with a good basic GPS computer to record my rides, the phone is less likely to crash and lose my Wahoo Fitness or Strava log when I switch to taking photos or videos, an occasional annoying problem with both my Android and iPhone.
Some of my friends have become so wary of riding in traffic they've switched to gravel and exploring rural off road routes, where Google maps may not represent current conditions and they need to reroute on the fly. So they've switched from simple bike computers to GPS devices.
That's a lot of capability in a device that costs the same as a CatEye Padrone, or only a little more for a lot more capability.
#35
Senior Member
As a luddite, I am adverse to introducing higher tech components to my machines. Been using the Cateye Velo 8 bike computer for decades without problems. Currently have 2 of them on bikes, and they are well over 10 years of age. What brand and model bike computers are you using?
#36
Callipygian Connoisseur
Join Date: Nov 2008
Posts: 1,373
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 564 Post(s)
Liked 350 Times
in
190 Posts
Newer wireless bike computers add several advantages over models like the CatEye Padrone, for the same money. Even if a cyclist doesn't think he needs GPS tracking, sensors for heart rate, speed, cadence, etc., now... fitness goals can change. Mine did.
Bluetooth and ANT+ sensors enable mounting on the rear wheel, so we can monitor while on an indoor trainer. Many old style wireless bike computers have limited range and require the magnet and sensor to be mounted on the front wheel/fork. There are Bluetooth/ANT+ induction type sensors that attach to the crank or hub with rubber bands -- no magnets needed. And ANT+ can share to more than one device, which is helpful for recording to multiple devices, or so a coach can monitor the rider's data if wanted.
For $25-$50, we can buy a basic GPS computer like the XOSS G+ I mentioned above. It does everything the CatEye Padrone does, and more... if the owner wants it. And it works with my existing ANT+ only, and Bluetooth/ANT+ sensors. It pairs quicky, easily and more reliably than my phones, which often take a minute or two to pair with sensors.
Add another $25-$30, and you can buy a Lezyne or Bryton for around $75-$80 that includes active GPS navigation aids -- breadcrumb trails, handy for folks who explore new routes on the road or off-road; even simple direction finding aids, like a graphic map or compass to replace the old ball-in-fluid compass (yup, I still have one) or, better still, my old orienteering compass and navigation aids I'd kept from the 1970s when I practiced orienteering in the hills of Camp Pendleton where I was stationed, and exploring the Cleveland National Forest alone, often after dark. That's amazing technology for about the same money as an orienteering compass and a couple of family radio service transceivers. Especially for someone like me, who has zero natural sense of direction, which is why I learned orienteering.
And those GPS bike computers have much longer runtime between charges than most cell phones. And with a good basic GPS computer to record my rides, the phone is less likely to crash and lose my Wahoo Fitness or Strava log when I switch to taking photos or videos, an occasional annoying problem with both my Android and iPhone.
Some of my friends have become so wary of riding in traffic they've switched to gravel and exploring rural off road routes, where Google maps may not represent current conditions and they need to reroute on the fly. So they've switched from simple bike computers to GPS devices.
That's a lot of capability in a device that costs the same as a CatEye Padrone, or only a little more for a lot more capability.
Bluetooth and ANT+ sensors enable mounting on the rear wheel, so we can monitor while on an indoor trainer. Many old style wireless bike computers have limited range and require the magnet and sensor to be mounted on the front wheel/fork. There are Bluetooth/ANT+ induction type sensors that attach to the crank or hub with rubber bands -- no magnets needed. And ANT+ can share to more than one device, which is helpful for recording to multiple devices, or so a coach can monitor the rider's data if wanted.
For $25-$50, we can buy a basic GPS computer like the XOSS G+ I mentioned above. It does everything the CatEye Padrone does, and more... if the owner wants it. And it works with my existing ANT+ only, and Bluetooth/ANT+ sensors. It pairs quicky, easily and more reliably than my phones, which often take a minute or two to pair with sensors.
Add another $25-$30, and you can buy a Lezyne or Bryton for around $75-$80 that includes active GPS navigation aids -- breadcrumb trails, handy for folks who explore new routes on the road or off-road; even simple direction finding aids, like a graphic map or compass to replace the old ball-in-fluid compass (yup, I still have one) or, better still, my old orienteering compass and navigation aids I'd kept from the 1970s when I practiced orienteering in the hills of Camp Pendleton where I was stationed, and exploring the Cleveland National Forest alone, often after dark. That's amazing technology for about the same money as an orienteering compass and a couple of family radio service transceivers. Especially for someone like me, who has zero natural sense of direction, which is why I learned orienteering.
And those GPS bike computers have much longer runtime between charges than most cell phones. And with a good basic GPS computer to record my rides, the phone is less likely to crash and lose my Wahoo Fitness or Strava log when I switch to taking photos or videos, an occasional annoying problem with both my Android and iPhone.
Some of my friends have become so wary of riding in traffic they've switched to gravel and exploring rural off road routes, where Google maps may not represent current conditions and they need to reroute on the fly. So they've switched from simple bike computers to GPS devices.
That's a lot of capability in a device that costs the same as a CatEye Padrone, or only a little more for a lot more capability.
-Kedosto
*Speedometer, odometer, and nothing more*
#37
Senior Member
Join Date: Sep 2013
Location: Massachusetts
Posts: 4,530
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 2112 Post(s)
Liked 663 Times
in
443 Posts
The OP’s choice has something more.
For you, suggest my first bike computer with speedometer, odometer and nothing more:
Schwinn!
-mr. bill
For you, suggest my first bike computer with speedometer, odometer and nothing more:
Schwinn!
-mr. bill
Likes For mr_bill:
#38
Senior Member
Flying Pigeon has been produced in great volume but is more handmade than you can imagine. And when it is shipped it is hardly a bicycle. Will require major and extended work by a skilled mechanic to make it into something rideable. And after all that it is neither good nor quite a Ned Ludd bike. Started life as a Raleigh Shanghai model DL-1 but there have been hundreds of running changes, all of them downgrades.
My commuter is also a Raleigh DL-1, in this case made by Eastman in Delhi. Not New Delhi, it is made in the old quarter of town as is fitting. It is quite close to the 1913 blueprint for the military version of the DL-1. As one piece lugs from Nottingham are no longer available they make lugs from scratch. Pieces of scrap sheet metal are hammered into shape around mandrels and then welded together. All hammer marks remain plainly visible. That is Luddism.
I wish I knew how many clones of the Raleigh DL-1 have been produced. As a guess some hundreds of millions. It works, why fix it?
Sadly the Eastman is no longer imported to these shores. Need for a four hour assembly makes the FOB price of roughly $20 not very tempting. A much higher quality maker by name of KW might respond to individual enquiry. My Eastman currently wears KW pedals which are astonishing copies of 1930s Raleigh pedals. Yes, I've worn out pedals on that bike. It's been ridden perhaps 200 days a year for 15 years and is going strong. Every ride is a joy. Living the dream of the bike that has defined 'bike' to billions for over a century.
Likes For 63rickert:
#39
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
You need to talk to a Luddite.
Flying Pigeon has been produced in great volume but is more handmade than you can imagine. And when it is shipped it is hardly a bicycle. Will require major and extended work by a skilled mechanic to make it into something rideable. And after all that it is neither good nor quite a Ned Ludd bike. Started life as a Raleigh Shanghai model DL-1 but there have been hundreds of running changes, all of them downgrades.
My commuter is also a Raleigh DL-1, in this case made by Eastman in Delhi. Not New Delhi, it is made in the old quarter of town as is fitting. It is quite close to the 1913 blueprint for the military version of the DL-1. As one piece lugs from Nottingham are no longer available they make lugs from scratch. Pieces of scrap sheet metal are hammered into shape around mandrels and then welded together. All hammer marks remain plainly visible. That is Luddism.
I wish I knew how many clones of the Raleigh DL-1 have been produced. As a guess some hundreds of millions. It works, why fix it?
Sadly the Eastman is no longer imported to these shores. Need for a four hour assembly makes the FOB price of roughly $20 not very tempting. A much higher quality maker by name of KW might respond to individual enquiry. My Eastman currently wears KW pedals which are astonishing copies of 1930s Raleigh pedals. Yes, I've worn out pedals on that bike. It's been ridden perhaps 200 days a year for 15 years and is going strong. Every ride is a joy. Living the dream of the bike that has defined 'bike' to billions for over a century.
Flying Pigeon has been produced in great volume but is more handmade than you can imagine. And when it is shipped it is hardly a bicycle. Will require major and extended work by a skilled mechanic to make it into something rideable. And after all that it is neither good nor quite a Ned Ludd bike. Started life as a Raleigh Shanghai model DL-1 but there have been hundreds of running changes, all of them downgrades.
My commuter is also a Raleigh DL-1, in this case made by Eastman in Delhi. Not New Delhi, it is made in the old quarter of town as is fitting. It is quite close to the 1913 blueprint for the military version of the DL-1. As one piece lugs from Nottingham are no longer available they make lugs from scratch. Pieces of scrap sheet metal are hammered into shape around mandrels and then welded together. All hammer marks remain plainly visible. That is Luddism.
I wish I knew how many clones of the Raleigh DL-1 have been produced. As a guess some hundreds of millions. It works, why fix it?
Sadly the Eastman is no longer imported to these shores. Need for a four hour assembly makes the FOB price of roughly $20 not very tempting. A much higher quality maker by name of KW might respond to individual enquiry. My Eastman currently wears KW pedals which are astonishing copies of 1930s Raleigh pedals. Yes, I've worn out pedals on that bike. It's been ridden perhaps 200 days a year for 15 years and is going strong. Every ride is a joy. Living the dream of the bike that has defined 'bike' to billions for over a century.
Good info, and a fun post. Since the real Luddites were probably dead well before the introduction of the safety bicycle, we'll just note that discerning their attitude towards any particular bike would be completely speculative. Keep in mind that the bicycle was quite a disruptive technology when it was introduced, and Luddism was all about nipping those in the bud.
#40
Senior Member
Join Date: Jun 2011
Location: Tampa, Florida
Posts: 5,585
Bikes: 2017 Colnago C-RS, 2012 Colnago Ace, 2010 Giant Cypress hybrid
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 408 Post(s)
Liked 122 Times
in
85 Posts
I recently bought a Wahoo Mini (couldn't pass it up at $50), and have added HR and cadence sensors. So far, it's been great. I use it for both rides and trainer sessions. Setup is super easy through the Wahoo app, and the amount of customization is remarkable for such a small and low-budget unit. I have mine set up to upload ride data to Strava at the end of the ride, and email a "live track" link to my wife at the start of the ride, both of which are also super easy to do through the Wahoo app. It's missing a couple of features of the bigger units (power meter and turn-by-turn directions being the biggest ones), but that's not a significant concern for me. I found a lot of excellent in-depth information about it by searching "wahoo mini review".
__________________
HCFR Cycling Team
Ride Safe ... Ride Hard ... Ride Daily
2017 Colnago C-RS
2012 Colnago Ace
2010 Giant Cypress
HCFR Cycling Team
Ride Safe ... Ride Hard ... Ride Daily
2017 Colnago C-RS
2012 Colnago Ace
2010 Giant Cypress
#41
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,997
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4957 Post(s)
Liked 8,099 Times
in
3,833 Posts
I have been looking at the Wahoo Mini for a while as a replacement for my wife's RFLKT when it dies. Now, I'm not so sure. Not only does Amazon have them on sale for $50.00 but so does Wahoo and they are out of stock. This tells me that Wahoo is getting ready to dump the Mini and come out with something in it's place or just rely on their Elemnt GPS line of computers moving forward. Actually, I would like to see Wahoo come up with a unit that works like the RFLKT but doesn't have all the disconnection issues that the RFLKT had.
#42
Senior Member
Join Date: Sep 2013
Location: Massachusetts
Posts: 4,530
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 2112 Post(s)
Liked 663 Times
in
443 Posts
For $50.00, you get the Elemnt Mini + Wahoo Speed Sensor. The speed sensor alone costs $40.00. You can configure it to pair with the speed sensor without ever pairing it to a phone. You'll get time, speed, distance and ride duration in this completely stand alone mode.
Caveat - If you never ever pair it to a phone app you will get no firmware updates.
-mr. bill
Caveat - If you never ever pair it to a phone app you will get no firmware updates.
-mr. bill
Likes For mr_bill:
#43
Señor Member
Join Date: Feb 2013
Posts: 5,066
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 649 Post(s)
Liked 293 Times
in
216 Posts
Bike computer for a luddite: Attach a pulley of known circumference to your front wheel (like a second rim), attach a ribbon of known length to the pulley, and every time the whole ribbon is wrapped around the pulley, stop and put a tic on a piece of paper. When you get home, count all the clicks and calculate distance ridden!
Likes For Wilfred Laurier:
#44
Happy banana slug
Join Date: Sep 2015
Location: Arcata, California, U.S., North America, Earth, Saggitarius Arm, Milky Way
Posts: 3,696
Bikes: 1984 Araya MB 261, 1992 Specialized Rockhopper Sport, 1993 Hard Rock Ultra, 1994 Trek Multitrack 750, 1995 Trek Singletrack 930
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 1533 Post(s)
Liked 1,530 Times
in
917 Posts
I love my Specialized Speedzone; basic functions in large friendly letters, and runs around $40 - $50. There's a Speedzone II out, looks to be similar to mine, but with a cooler mount. Got mine at my LBS.
#45
Senior Member
Join Date: Jun 2019
Posts: 641
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 346 Post(s)
Likes: 0
Liked 398 Times
in
260 Posts
Here is an excellent "DUMB" wireless bicycle computer.
INBIKE IC321
there is no gps, there is no ability to download data from it......it is just a superb wireless SPEEDOMETER, ODOMETER, TRIP ODOMETER, CLOCK, some stopwatch things....
LARGE DISPLAY for SPEEDO with CLOCK at top LEFT and ODOMETER at top RIGHT
(typically sells for between about $9 FREE SHIPPING (china & hong kong based ebay sellers) to about $13.50 FREE SHIPPING (USA based ebay sellers)
obviously, there are plenty of sellers that list and sell this INBIKE IC321 wireless SPEEDO for much more than $13.50 free shipping but there is NO REASON to pay more. There are no differences in the products whether from China based or USA based sellers. There were several years ago when this INBIKE IC321 first appeared, and the ONLY difference was that some China based sellers at that time did not supply the two CR2032 round batteries. The China based sellers have been providing the two CR2032 batteries recently. I have bought many of these IC321 SPEEDOMETERS and I have installed more them on more than thirty old vintage bicycles and also on about seven modern bicycles. This INBIKE IC321 really requires a different way to mount the SENSOR on vintage bicycles with BLADE forks (such as old ancient Schwinns and other brands...) because these are designed to have the SENSOR zip tied and 3m double sided mounting taped to a fat round "broomstick" style front fork. I fabricated my own mounts which allow the SENSOR to hang OFF FROM BENEATH THE LEFT FRONT AXLE NUT. My neighbor came up with a simple version which does the same but is simple to make with zero equipment etc.... His method Uses a Large Size ACCO BINDER Clamp (an ordinary binder clamp, it doesn't have to be any particular brand..) The BINDER CLAMP size that you need matches the size of the Sensor. JB WELD the BINDER CLAMP to the Sensor after placing a piece of sewing thread of approx 20 inches long through the holes provided for zipties, such that you have about 9 inches sticking out at each side. Liberally coat the area where you will CLAMP the Binder CLIP but not so much that the JB WELD or EPOXY runs into the battery cover area. AFFIX THE CLAMP AND THEN USE THE LOOSE THREAD TO WHIP(wind around) the chromed ARM..............remember how old golf clubs were......driver, 3-wood etc when Persimmon and Laminated wood heads were the norm before 1985... same idea...... You are ONLY USING one chrome ARM of the binder clip as the HANGER that goes beneath the LEFT FRONT AXLE NUT...............you remove the other chrome Arm from the BINDER CLIP.............................The reason that you whip (wind) the thread around it is to SECURE the binder clip's chrome arm such that it does not move or swivel.......................Essentially you use Ordinary Sewing Thread saturated in Epoxy or JB WELD to accomplish that. AFTER THIS EPOXY HAS DRIED AND FULLY SET, You'll likely need to slightly BEND this chrome arm as needed to get the SENSOR in the right proximaty of the magnet. (this is the simplest method of mounting the INBIKE IC321 on ancient vintage bicycles..................depending on the spokes/spoke configuration that the ancient bike or bikes might have......you might have to file or slightly modify the plastic mount of the magnet in order to get the magnet mounted properly.........this varies according to spoke shape (round, etc) and spoke thickness, etc..............Many times in such cases, it is much easier to just purchase another $1 replacement magnet that has a different style mount........... THESE MODIFICATIONS AND ALTERATIONS ARE ONLY APPLICABLE IN FITTING THIS INBIKE IC321 to Ancient Bicycles such as Schwinn and anything from the 1970's and earlier! This INBIKE IC321 is fantastic on such ancient bicycles if you make such modifications/adaptation as I mentioned above. Obviously if you've got a MODERN bicycle/mountain bike with a "broomstick" shape front fork, you won't need to do anything at all, as the INBIKE IC321 will mount perfectly as it is designed to do.
https://www.ebay.com/itm/Waterproof-...h=item522c41c9
https://www.ebay.com/itm/ACCO-Binder...oAAOSwlHJeKIix
https://www.ebay.com/itm/Universal-M...pid=502226912&
https://www.ebay.com/itm/Bicycle-Com...ash=item591bf2
These INBIKE IC321 wireless speedometers are great on any gaspipe, electroforged Schwinn, or any ancient heavyweight single speed cruiser, as well as most anything expensive or not, from the LBS or Wallyworld or Tar-jay, or even that web seller that has new Flying Pigeon bicycles for about $75 Free Shipping,
This INBIKE IC 321 wireless speedometers are excellent. I was probably among the first people in the USA to be a user of the INBIKE IC 321.
INBIKE IC321
there is no gps, there is no ability to download data from it......it is just a superb wireless SPEEDOMETER, ODOMETER, TRIP ODOMETER, CLOCK, some stopwatch things....
LARGE DISPLAY for SPEEDO with CLOCK at top LEFT and ODOMETER at top RIGHT
(typically sells for between about $9 FREE SHIPPING (china & hong kong based ebay sellers) to about $13.50 FREE SHIPPING (USA based ebay sellers)
obviously, there are plenty of sellers that list and sell this INBIKE IC321 wireless SPEEDO for much more than $13.50 free shipping but there is NO REASON to pay more. There are no differences in the products whether from China based or USA based sellers. There were several years ago when this INBIKE IC321 first appeared, and the ONLY difference was that some China based sellers at that time did not supply the two CR2032 round batteries. The China based sellers have been providing the two CR2032 batteries recently. I have bought many of these IC321 SPEEDOMETERS and I have installed more them on more than thirty old vintage bicycles and also on about seven modern bicycles. This INBIKE IC321 really requires a different way to mount the SENSOR on vintage bicycles with BLADE forks (such as old ancient Schwinns and other brands...) because these are designed to have the SENSOR zip tied and 3m double sided mounting taped to a fat round "broomstick" style front fork. I fabricated my own mounts which allow the SENSOR to hang OFF FROM BENEATH THE LEFT FRONT AXLE NUT. My neighbor came up with a simple version which does the same but is simple to make with zero equipment etc.... His method Uses a Large Size ACCO BINDER Clamp (an ordinary binder clamp, it doesn't have to be any particular brand..) The BINDER CLAMP size that you need matches the size of the Sensor. JB WELD the BINDER CLAMP to the Sensor after placing a piece of sewing thread of approx 20 inches long through the holes provided for zipties, such that you have about 9 inches sticking out at each side. Liberally coat the area where you will CLAMP the Binder CLIP but not so much that the JB WELD or EPOXY runs into the battery cover area. AFFIX THE CLAMP AND THEN USE THE LOOSE THREAD TO WHIP(wind around) the chromed ARM..............remember how old golf clubs were......driver, 3-wood etc when Persimmon and Laminated wood heads were the norm before 1985... same idea...... You are ONLY USING one chrome ARM of the binder clip as the HANGER that goes beneath the LEFT FRONT AXLE NUT...............you remove the other chrome Arm from the BINDER CLIP.............................The reason that you whip (wind) the thread around it is to SECURE the binder clip's chrome arm such that it does not move or swivel.......................Essentially you use Ordinary Sewing Thread saturated in Epoxy or JB WELD to accomplish that. AFTER THIS EPOXY HAS DRIED AND FULLY SET, You'll likely need to slightly BEND this chrome arm as needed to get the SENSOR in the right proximaty of the magnet. (this is the simplest method of mounting the INBIKE IC321 on ancient vintage bicycles..................depending on the spokes/spoke configuration that the ancient bike or bikes might have......you might have to file or slightly modify the plastic mount of the magnet in order to get the magnet mounted properly.........this varies according to spoke shape (round, etc) and spoke thickness, etc..............Many times in such cases, it is much easier to just purchase another $1 replacement magnet that has a different style mount........... THESE MODIFICATIONS AND ALTERATIONS ARE ONLY APPLICABLE IN FITTING THIS INBIKE IC321 to Ancient Bicycles such as Schwinn and anything from the 1970's and earlier! This INBIKE IC321 is fantastic on such ancient bicycles if you make such modifications/adaptation as I mentioned above. Obviously if you've got a MODERN bicycle/mountain bike with a "broomstick" shape front fork, you won't need to do anything at all, as the INBIKE IC321 will mount perfectly as it is designed to do.
https://www.ebay.com/itm/Waterproof-...h=item522c41c9
https://www.ebay.com/itm/ACCO-Binder...oAAOSwlHJeKIix
https://www.ebay.com/itm/Universal-M...pid=502226912&
https://www.ebay.com/itm/Bicycle-Com...ash=item591bf2
These INBIKE IC321 wireless speedometers are great on any gaspipe, electroforged Schwinn, or any ancient heavyweight single speed cruiser, as well as most anything expensive or not, from the LBS or Wallyworld or Tar-jay, or even that web seller that has new Flying Pigeon bicycles for about $75 Free Shipping,
This INBIKE IC 321 wireless speedometers are excellent. I was probably among the first people in the USA to be a user of the INBIKE IC 321.
#46
Senior Member
Join Date: Jun 2011
Location: Tampa, Florida
Posts: 5,585
Bikes: 2017 Colnago C-RS, 2012 Colnago Ace, 2010 Giant Cypress hybrid
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 408 Post(s)
Liked 122 Times
in
85 Posts
Pretty much all of the retail outlets for the Mini have it at $50. It's certainly possible that they are discontinuing the item, and dumping the inventory at a discount. That said, for a fairly simple device with some smart capabilities (when paired with your phone), it was an easy call for me, and I'm pretty happy with it for the moment. For a next step above the Mini, I would probably go with the Bolt, but it's more of an investment than I want to make right now.
__________________
HCFR Cycling Team
Ride Safe ... Ride Hard ... Ride Daily
2017 Colnago C-RS
2012 Colnago Ace
2010 Giant Cypress
HCFR Cycling Team
Ride Safe ... Ride Hard ... Ride Daily
2017 Colnago C-RS
2012 Colnago Ace
2010 Giant Cypress
#47
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,997
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4957 Post(s)
Liked 8,099 Times
in
3,833 Posts
Don't get me wrong! $50.00 is an excellent price for the Mini, especially when the speed sensor that comes with it is almost that much. My only concern is that if I purchase one for the wife and there is a problem with it, Wahoo is out of stock and getting a replacement for it will pretty much be a no go; especially if it's being discontinued. I had that happen with a Sigma computer I purchased, years ago. It was still in the warranty period but became discontinued a month or so after I bought it. The cadence function quit working and I was stuck with a computer without cadence. I gave that one to the wife since she didn't use cadence at the time.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#48
For The Fun of It
Thread Starter
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,852
Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 2135 Post(s)
Liked 1,647 Times
in
829 Posts
Seriously? All this talk about GPS and phone pairing and heart rate monitoring when he needs nothing more than a basic cheapo (which is what he said he wanted).
About $50 bucks will get you a wireless Cateye Padrone. They last forever (with simple battery changes) and have nice big numbers for old eyes. I’ve been a Cateye consumer since the 90’s. They’re durable, accurate, and easy to mount. No, they’re not $15 throw aways, but had you bought a $40 wireless Vector like I did about a decade ago it would still be getting it done just like mine. I went to the Padrone for the larger text and fully expect it will last and perform as well as the others.
-Kedosto
About $50 bucks will get you a wireless Cateye Padrone. They last forever (with simple battery changes) and have nice big numbers for old eyes. I’ve been a Cateye consumer since the 90’s. They’re durable, accurate, and easy to mount. No, they’re not $15 throw aways, but had you bought a $40 wireless Vector like I did about a decade ago it would still be getting it done just like mine. I went to the Padrone for the larger text and fully expect it will last and perform as well as the others.
-Kedosto
#49
For The Fun of It
Thread Starter
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,852
Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 2135 Post(s)
Liked 1,647 Times
in
829 Posts
I appreciate your points (well stated) and see nothing wrong with your opinion. However, there are times when all one wants is a simple pencil and paper and not a scientific calculator. I came into this thread under the impression that OP is basically looking for a nice pencil but instead has received several suggestions at amazing scientific calculators. Nothing wrong with the calculators, but...
-Kedosto
*Speedometer, odometer, and nothing more*
-Kedosto
*Speedometer, odometer, and nothing more*
You read me right. I have had my best luck with Cateye products. Unfortunately my last one with the Padrone was my last one.
#50
Senior Member
Good info, and a fun post. Since the real Luddites were probably dead well before the introduction of the safety bicycle, we'll just note that discerning their attitude towards any particular bike would be completely speculative. Keep in mind that the bicycle was quite a disruptive technology when it was introduced, and Luddism was all about nipping those in the bud.
Ball bearings had existed, they were simply too expensive to use, and designers figured how to get the job done without them. Bikes created the demand for ball bearings. Bikes were the killer app that made ball bearings a thing. After a lot of false starts and dead ends the technique for making balls in bulk was the tech for making marbles. Toy marbles. Just start with small pieces of steel instead of small rocks. It was seventeenth/eighteenth century tech.
Pneumatic tires were completely novel. I want to keep them. All that's needed to make a tire is needle and thread. Oh, and rubber. Which means international trade is needed. Global trade has been a constant since the Bronze Age. It might be nice to try a tire with a casing made from Dacca muslin. From what is known of that fabric it would seem ideal. But the stuff only exists in museums. No one has known how to weave it for about 200 years. Preserving just that sort of knowledge is what Luddism was about.
All the other details that go into current bicycles are just that, details. A derailleur is a series of levers and pivots. Any Luddite mechanic can understand any derailleur. Or at least any mechanical derailleur. Electric derailleurs we won't even think about.
Luddism was always about valuing persons over commerce. Not hostile to nice things. Or more specifically not hostile to nice things made by humans.
Likes For 63rickert: