Bike Forums
Page 2 of 2
1
2
Show 30 post(s) from this thread on one page

Bike Forums (https://www.bikeforums.net/forum.php)
-   Singlespeed & Fixed Gear (https://www.bikeforums.net/singlespeed-fixed-gear/)
-   -   FSA Carbon Track or SRAM Omnium? (https://www.bikeforums.net/singlespeed-fixed-gear/1085882-fsa-carbon-track-sram-omnium.html)

RMoudatir 10-29-16 05:02 AM
What it looks like installed, still have them stock platform petals xD planning to go clipless soon.

FSA Carbon Track https://imgur.com/gallery/E78XB

seau grateau 10-29-16 05:07 AM
Lol, they're probably fine. Logos on crank arms get worn through all the time by shoes or pedal straps rubbing against them during rotations.

TejanoTrackie 10-29-16 06:42 AM
Too many fatigue cycles on them, could explode any time w/o warning. RIP [MENTION=438014]RMoudatir[/MENTION]

Nagrom_ 10-29-16 07:40 AM
Originally Posted by seau grateau (Post 19155221)
Logos are totally worn through on the drive side. Those are load-bearing decals.
The BB doesn't have a single LBD visible.

You couldn't pay me to ride those.

Scrodzilla 10-29-16 08:34 AM
Originally Posted by TenSpeedV2 (Post 19155119)
I find these to be extremely sharp looking, not just because they are carbon, but because they look really nice, especially on a black bike.
When choosing a crucial component like a crankset, it's always best to put looks first.

SquidPuppet 10-29-16 10:49 AM
Ugly anyway. :p

Scrodzilla 10-29-16 10:55 AM
Originally Posted by SquidPuppet (Post 19155685)
Ugly anyway. :p
I concur.

JeremyLC 10-29-16 11:35 AM
Originally Posted by TenSpeedV2 (Post 19155119)
I find these to be extremely sharp looking, not just because they are carbon, but because they look really nice, especially on a black bike.

http://i.imgur.com/9ShEF.jpg
waitaminnit... ISIS splined BB? No.

RMoudatir 10-29-16 11:44 AM
Originally Posted by Nagrom_ (Post 19155409)
The BB doesn't have a single LBD visible.

You couldn't pay me to ride those.
Yeah, So when I went to my local bike shop yesterday to have the crank set installed since I didn't have the tools and they told me the BB was burnt out that I needed to replace it so I decided to purchase a new one then.

Nagrom_ 10-29-16 02:39 PM
******' knew it.

Soil_Sampler 10-29-16 04:24 PM
isis
 
Originally Posted by JeremyLC (Post 19155784)
waitaminnit... ISIS splined BB? No.
https://janheine.files.wordpress.com...pg?w=640&h=314

SKF, yes.

Scrodzilla 10-29-16 04:37 PM
Originally Posted by Nagrom_ (Post 19156020)
******' knew it.
:roflmao:

Leukybear 10-30-16 11:36 AM
Originally Posted by Soil_Sampler (Post 19156174)
Fancy. It's a real shame you can only get their BBs from one dealer in the states officially. Their industrial bearings are readily available from your industrial supply source however :rolleyes:

I never realized their design incorporated roller bearings on the drive side either.


All times are GMT -6. The time now is 11:22 AM.
Page 2 of 2
1
2
Show 30 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.