Cog Spacers
04-08-06 | 09:54 PM
#1
Thread Starter
Biggity-bam
Joined: Apr 2006
Posts: 698
Likes: 0
From: West Lafayette IN, Ann Arbor MI
Bikes: Pista Concept, Fetish beater, Fuji road
Cog Spacers
I'm running iro hubs with spacers on the sides to fit my 130mm frame. I'm trying to keep my BB and cranks centered (I run an adjustable BB), but the chainline is off by just about 1/16th of an inch or so. Are there cog spacers that I could spin on before my cog and lockring that would move the cog out, leaving my cranks centered? If so is there any concern there aren't enough threads for the cog to thread on, or the lockring.
04-08-06 | 10:05 PM
#2
King Among Runaways
Joined: Mar 2005
Posts: 4,215
Likes: 1
From: MKE
Bikes: 2004 Bianchi Pista, Cannondale Track, Soma Pake, Schwinn Breeze
A very big concern, yes.
If the BB is adjustable, why can't you just move it in?
If the BB is adjustable, why can't you just move it in?
__________________
"I owe everyone an apology" - hyperrevue
"I owe everyone an apology" - hyperrevue
