Schnee, you want to share any secrets? :P

for quiet try to get
-good chainline
-good chain tension
-good wet lube
-rear wheel correctly centered in dropouts
-round & straight chainring (cheap = often neither)
-tightening chain ring bolts evenly and lightly tapping it onto spider will help too
-maybe bushingless chain is quiter than bushing chain ? (hypothesizin, less moving parts ?)

Well what kind of chainring would you reccomend? I'm kind of looking for it to be black, 3/32", 110 BCD, and 39, 41, 43 teeth (so I don't get only one or two skid patches). And of course track or bmx, so no ramps or pins! Currently I'm looking at this Rocket Ring http://cgi.ebay.com/TRACK-FIXED-GEAR...QQcmdZViewItem . Is it any good?

rocket rings are flexy not very good quality

ta makes one it is nice but I think it is polished (these are very nice 1/8" you can get em from sheldon brown)

profile designs makes one as well but I don't know about the quality try asking the bmx forum

or you could get a boone ti ring

get that piece of **** here instead http://danscomp.com/459030.php?cat=PARTS

or suck up the skid patches and save a few bucks http://cgi.ebay.com/Sugino-42t-Chain...QQcmdZViewItem

I got a couple old gt racing bmx shainrings around they are 110mm I will see how many teeth they got when I get in my bin next mmmk

Yeah sure, although I'll want them to be new, or not worn down. I'm out of town for a week starting now, but PM me if you find anything.

Oh, does anyone know if Tron's option is a rocket ring (i.e. low quality) or good quality? It's looking mighty nice, although funny how it says "Fits all 1/8 and 3/32" chains." So I'm guessing if it fits them all, it's a 3/32".

Well, others have covered it, and this is only my second fixed gear, so I'm no expert but this is what worked:

1) Chainline, chainline, chainline - that's #1 because of the number of moving parts, and the amount of stress they are under, they will be noisy as he(double hockeysticks) if off even by 2mm
2) Spend enough on the components - you don't have to go Phil, but cheaping out will get you noisy stuff
3) Lubricate the chain regularly - I like white lightning

HTH

to reiterate, chainrings that aren't perfectly round cause slack in the chain during part of the revolution, which, when you're spinning along, tends to oscillate (sometimes violently), creating some noise and noticeable vibration.

clean the **** out of your chain, fix your chainline, check the chain tension, and replace the chainring if necessary.

white lightning & other wax based lubes, in my experience, can leave residue that makes cleaning a little more of a pain in the ass.

the first one is a rocket

the second is sugino

sometimes you can find mtb chainrings that are 110bcd also that don't have any ramps or pins as well



found my old bmx rings they are all silver they are also 43 and 46t just shoot me a pm when ever you are in sacramento and they are yours if you want em