Bike Forums
Page 3 of 3
1
2
3
Show 30 post(s) from this thread on one page

Bike Forums (https://www.bikeforums.net/forum.php)
-   Singlespeed & Fixed Gear (https://www.bikeforums.net/singlespeed-fixed-gear/)
-   -   Bare Knuckle Frames ?? (https://www.bikeforums.net/singlespeed-fixed-gear/225028-bare-knuckle-frames.html)

visitordesign 09-05-06 10:22 PM
Originally Posted by eyefloater
whereas the Bob Jackson looks like a nice fixed gear roadish frame. Any idea of the specific geometry, btw?
mine's 58-st/74.5d, 56tt, 74.5d ht, 28-30mm rake, 38 cm cs

piwonka 09-06-06 10:48 AM
Originally Posted by visitordesign
mine's 58-st/74.5d, 56tt, 74.5d ht, 28-30mm rake, 38 cm cs
is that off the peg? (I sure hope so)

dutret 09-06-06 10:53 AM
No his is custom.

piwonka 09-06-06 11:04 AM
Originally Posted by dutret
No his is custom.
figures.
i'm trying to find out the off the peg geometry but it's proving to be a hard task.

sfcrossrider 09-06-06 02:48 PM
Originally Posted by Tangsooyuk
:roflmao: I thought I was the only person that saw that movie.
I've got the two disc set. I'd love me some CHUD about now.

piwonka 09-07-06 03:24 PM
Originally Posted by eyefloater
The Bareknuckle's a plain track frame, whereas the Bob Jackson looks like a nice fixed gear roadish frame. Any idea of the specific geometry, btw?

check this out eyefloater.

piwonka 09-07-06 03:27 PM
Originally Posted by visitordesign
mine's 58-st/74.5d, 56tt, 74.5d ht, 28-30mm rake, 38 cm cs
you have some pics?
this is almost exactly the geometry i'm interested in...i'm just not sure on seat tube length yet, what's your standover height?

visitordesign 09-07-06 03:32 PM
http://www.visitordesign.com/pony.jpg
http://www.visitordesign.com/paul-ends.jpg


looks a little different and has a steeper gearing now. not sure what the standover is. will check later.

dogpound 09-07-06 03:42 PM
I still want whatever is orange and green in the background there

piwonka 09-07-06 03:57 PM
Originally Posted by visitordesign
looks a little different and has a steeper gearing now. not sure what the standover is. will check later.
sweet bike.
does your rear tire touch your seattube if you move it all the way forward in your track ends?

sbornia 09-07-06 03:57 PM
Originally Posted by piwonka
figures.
i'm trying to find out the off the peg geometry but it's proving to be a hard task.
Have you emailed the sales dept. at Bob Jackson with your geometry questions? I did this earlier in the year, asking specifically about the 21.5" frame. Here's the reply I received:

"A 21.5” has 21.5” tt, 23” dt, 6” ht and has a 73 degree head angle and a 74 degree seat angle."

piwonka 09-07-06 03:59 PM
Originally Posted by sbornia
Have you emailed the sales dept. at Bob Jackson with your geometry questions? I did this earlier in the year, asking specifically about the 21.5" frame. Here's the reply I received:

"A 21.5” has 21.5” tt, 23” dt, 6” ht and has a 73 degree head angle and a 74 degree seat angle."
yeah i got a reply this morning actually after resending the email once.

visitordesign 09-07-06 04:33 PM
Originally Posted by piwonka
sweet bike.
does your rear tire touch your seattube if you move it all the way forward in your track ends?
it hits a little before then.


All times are GMT -6. The time now is 09:30 AM.
Page 3 of 3
1
2
3
Show 30 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.