Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Singlespeed & Fixed Gear (https://www.bikeforums.net/singlespeed-fixed-gear/)
-   -   Toe strike on Steamroller (https://www.bikeforums.net/singlespeed-fixed-gear/490989-toe-strike-steamroller.html)

andmalc 12-01-08 02:11 PM

Toe strike on Steamroller
 
I've just put toe clips and fenders on my Steamroller and am getting some pretty nasty toe strike. In fact, I think it would happen even without the fenders.

Is this happening to anybody else? My cranks are 170mm. Do I have to go down to 165's? I rather not cause I'm long legged. I could go clipless but I prefer clips for urban riding. I want to keep the fenders to keep the salt spray off during the winter.

4zn_balla 12-01-08 02:19 PM

You're talking about toe overlap, and no going from 170mm to 165mm won't fix the problem since that would be changing the crank length 5mm. First to access the problem: I don't see one. The only time this may affect you is when you're going < 2 mph. When you're going fast there is absolutely no way your wheel will hit your pedal.

bboysubhuman 12-01-08 02:21 PM


Originally Posted by 4zn_balla (Post 7945340)
You're talking about toe overlap, and no going from 170mm to 165mm won't fix the problem since that would be changing the crank length 5mm. First to access the problem: I don't see one. The only time this may affect you is when you're going < 2 mph. When you're going fast there is absolutely no way your wheel will hit your pedal.

Well if the overlap is less than 5mm, then it would fix the problem.

Anyway, toe overlap is just a problem you have to learn to live with.

delorean 12-01-08 02:29 PM


Originally Posted by 4zn_balla (Post 7945340)
You're talking about toe overlap, and no going from 170mm to 165mm won't fix the problem since that would be changing the crank length 5mm. First to access the problem: I don't see one. The only time this may affect you is when you're going < 2 mph. When you're going fast there is absolutely no way your wheel will hit your pedal.

barspinz

andmalc 12-01-08 02:30 PM


Originally Posted by 4zn_balla (Post 7945340)
... The only time this may affect you is when you're going < 2 mph. When you're going fast there is absolutely no way your wheel will hit your pedal.

Yeah, it happens when maneuvering in traffic, so it wouldn't make me crash but it would prevent me from turning sharply when I need to.

Thetank 12-01-08 04:02 PM

if 165s will help clear the toe overlap why not get them? How tall are you in the first place and what size frame are you riding?

gkelley 12-01-08 04:07 PM

you get used to it, you can probably angle your foot down to miss the tire or you can skid around corners too:) That's what you get when you buy a frame with compact geo and put fenders on it to boot

Thetank 12-01-08 04:58 PM

Steamroller doesn't have compact geometry. You can use smaller toe clips to help clear but overlap isn't as bad as it seems after you ride it like that for a while.

Yan 12-01-08 07:29 PM

I used to ride a road bike with terrible toe overlap. Now I ride a Surly Cross Check with ton of spare room even with fenders. It's nice to have one less thing to worry about.

croscoe 12-01-08 07:31 PM

Tilt your foot a bit. :D

Ride Among Us 12-01-08 07:47 PM

dont listen to the person who said 5mm won't help. yes it will. get 165s.

spaceballs 12-01-08 08:52 PM

What size Steamroller?

surfrider 12-01-08 09:20 PM

I've got a Steamroller with LARGE toeclips, 165 crank arms, and 700 x 32 tires. If I try really, really, really hard, I can get the front of my clips to touch the tire. Howver, I've never had any toe strike issues while out riding at normal speeds since I'm more liekly to be leaning around corners and objects.

andmalc 12-01-08 09:39 PM

My frame size is a 56. My cycling inseam is about 58 (34.5") so I'm pretty long in the leg and take a 172.5 on a road bike crank. But if I can borrow some 165's I'll give 'em a try.

In any case, turns out a shorter crank would help but I've got a long way to go. The overlap is 2 cm. Of that, the fender takes up about .5 cm. I'll look into a smaller toe clip.

I was out tonight trying tilting the inside pedal in turns - maybe I'll figure out a way to turn that into some kind of fixed gear stunt.

andmalc 12-01-08 09:51 PM


Originally Posted by surfrider (Post 7947667)
I've got a Steamroller with LARGE toeclips, 165 crank arms, and 700 x 32 tires. If I try really, really, really hard, I can get the front of my clips to touch the tire. Howver, I've never had any toe strike issues while out riding at normal speeds since I'm more liekly to be leaning around corners and objects.

Just saw your post: as we were saying earlier in the thread, this is only a problem making turns at low speed, such as pulling out from side streets into traffic.

Since you mention tire size, I was just about to order studded Schwalbe Marathon Winter tires which are 35 mm wide. Now I'm hesitating because I figure the knobs on these will make them higher = yet more overlap. This is a drag.

Buddhalite 12-01-08 09:54 PM

I recently went into my LBS with the intent of buying a Steamroller and also found the overlap to be something I wasn't comfortable with. Instead I bought a Redline.

physh 12-01-08 11:08 PM

Toe overlap shouldn't be a problem.

I ride a 52 track frame with really tight geometry with substantial toe overlap, and LL MKS clips Riding through traffic, I've never had any trouble with toe overlap.

Try tilting your feet down. I think toe overlap is one of those problems that go away when you get used to riding a fixed gear, kind of like getting used to not coasting.

miahmiah 12-02-08 04:33 AM


Originally Posted by croscoe (Post 7946984)
Tilt your foot a bit. :D

I think a lot of people never try this... why else would they be posting?

Also good for toe overlap problems, since they only happen with fixed gears, is learning to hop your back tire into the air a tad while repositioning your feet when you see a tight turn coming up and think you might hit the wheel.

TPR950H 12-02-08 12:54 PM


Originally Posted by physh (Post 7948234)
Toe overlap shouldn't be a problem.

I ride a 52 track frame with really tight geometry with substantial toe overlap, and LL MKS clips Riding through traffic, I've never had any trouble with toe overlap.

Try tilting your feet down. I think toe overlap is one of those problems that go away when you get used to riding a fixed gear, kind of like getting used to not coasting.

do you have a pic illustrating how much overlap you have? i wanna see how much people can get by with.

i have so much overlap on one of my bikes i think i may have to go clipless-- mks sylvan pedals currently hit the front tire.


All times are GMT -6. The time now is 12:25 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.