what size crank puller?
03-05-09 | 08:44 PM
#1
Thread Starter
Junior Member
Joined: Jan 2009
Posts: 20
Likes: 0
what size crank puller?
Hi guys....
I'm taking apart a schwinn madison and i need to buy a crank remover. any idea what size i buy? thanks for all the help lately. I'm only 15 and just getting into building bikes from nothing. Alot of learning as you go!
I'm taking apart a schwinn madison and i need to buy a crank remover. any idea what size i buy? thanks for all the help lately. I'm only 15 and just getting into building bikes from nothing. Alot of learning as you go!
03-05-09 | 08:49 PM
#2
Senior Member
Joined: Mar 2007
Posts: 1,248
Likes: 0
From: Rohnert Park, CA
Bikes: Pake track, Soma DoubleCross, LeMond Etape, Maruishi RoadAce 303
You need the Park CCP-22 or equivalent. Pedros also makes a nice one. If you walk into a bike shop, just tell them that you need a crank puller for a square taper crank.
Park CCP-22: https://www.parktool.com/products/det...26&item=CCP-22
Park CCP-22: https://www.parktool.com/products/det...26&item=CCP-22
03-05-09 | 08:50 PM
#3
No plan.
Joined: May 2007
Posts: 2,743
Likes: 0
From: PA
There aren't any sizes. You just ask for a normal square taper puller. Get a nicer Park one with an ISIS insert (ISIS is a different crank/bottom bracket interface and it requires a little plug for the remover) in case you need to remove one of them one day.
03-05-09 | 09:20 PM
#4
Rumblefish
Joined: Dec 2007
Posts: 687
Likes: 0
From: Austin Texas
Bikes: 1973 Crescent Pepita Single Speed,1978 Raleigh Competition G.S.,1976 Raleigh Super Course MKII,1970's Motobecane Super Touring Fixed Gear, 1980's Denti Road Tech Five,Gary Fisher Hoo Koo E Koo,1973 Atala Giro,Cheap MTB Tandem,Schwinn World Sport
Actually,some French cranks use a 23 puller. Unless you're sporting some old cranks your Madison uses a 22.
