Deda Elementi CronoNero Bars
09-26-09 | 11:34 AM
#1
Thread Starter
Senior Member
Joined: Apr 2009
Posts: 171
Likes: 0
From: Chicago
Bikes: 2009 Jamis Sputnik, a couple of old mixtes
Deda Elementi CronoNero Bars
Has anyone used the Deda CronoNero bars or at least seen them in person? I'm swapping my dropped bars for either the CronoNero or the Profile T2 bullhorns. There are a lot of pics out there of the T2s from every angle so I have a pretty good idea of what's going on there. The Dedas, however, are way less photographed. I basically have the stock photo and the little beaut below.
Ben's Cycle's website confirmed that the Dedas are flat across the top, like the T2s. My question is when the flats on top are pretty much horizontal, are the horns angled down? I can't find a pic of the Deda's from the side so I can't really see what the angles are like. Little help?
Ben's Cycle's website confirmed that the Dedas are flat across the top, like the T2s. My question is when the flats on top are pretty much horizontal, are the horns angled down? I can't find a pic of the Deda's from the side so I can't really see what the angles are like. Little help?
09-26-09 | 04:10 PM
#5
Senior Member
Joined: Feb 2007
Posts: 545
Likes: 0
From: CA
I really like them. finally found a set of horns where i'm not thinking 'these are pretty nice....if only!"
i've had Syntace Stratos and Nitto RB-021's which both had drawbacks in my opinion.
the wing shape of the flats ends up working out great, i'm just getting the reach dialed in right now.
the one bad thing, which should totally be overlooked, is they get scuffed up really really easily. my bars were brand new yesterday, and the scuffs you see are from being rested against a white cabinet door. i don't think it's damaging the finish of the bars as much as the paint or powdercoat they use attracts every little thing.
i've had Syntace Stratos and Nitto RB-021's which both had drawbacks in my opinion.
the wing shape of the flats ends up working out great, i'm just getting the reach dialed in right now.
the one bad thing, which should totally be overlooked, is they get scuffed up really really easily. my bars were brand new yesterday, and the scuffs you see are from being rested against a white cabinet door. i don't think it's damaging the finish of the bars as much as the paint or powdercoat they use attracts every little thing.
09-26-09 | 04:37 PM
#6
Thread Starter
Senior Member
Joined: Apr 2009
Posts: 171
Likes: 0
From: Chicago
Bikes: 2009 Jamis Sputnik, a couple of old mixtes
Thanks so much for the pic and opinion, G60! You really came through big time.
Does anyone else have an opinion of the Profile Design T2 or the Dedo CronoNero bars? Whether you've tried them or not, I'd be interested to hear it.
Does anyone else have an opinion of the Profile Design T2 or the Dedo CronoNero bars? Whether you've tried them or not, I'd be interested to hear it.
09-26-09 | 05:16 PM
#7
K2ProFlex baby!
Joined: Feb 2007
Posts: 6,134
Likes: 59
From: My response would have been something along the lines of: "Does your bike have computer controlled suspension? Then shut your piehole, this baby is from the future!"
Bikes: to many to list
Wow, those Deda CronoNero bars are really nice, I find that I'm never in the drops, so I think I'm going to go out and get a pair! 
__________________
You see, their morals, their code...it's a bad joke, dropped at the first sign of trouble. They're only as good as the world allows them to be. I'll show you. When the chips are down, these...These "civilized" people...they'll eat each other. See, I'm not a monster. I'm just ahead of the curve
You see, their morals, their code...it's a bad joke, dropped at the first sign of trouble. They're only as good as the world allows them to be. I'll show you. When the chips are down, these...These "civilized" people...they'll eat each other. See, I'm not a monster. I'm just ahead of the curve
09-26-09 | 05:19 PM
#8
Thread Starter
Senior Member
Joined: Apr 2009
Posts: 171
Likes: 0
From: Chicago
Bikes: 2009 Jamis Sputnik, a couple of old mixtes
That's the same reason I'm looking at bullhorns. I just never go in the drops so I'm letting them go. Plus, my bike still has all of it's stock parts. I want to start making it my own.
