bar spin fork for rush hour
i have a raleigh rush hour (06 or 07) and i believe the fork has a 42mm rake. when i try to do barspins the tire is just about 5mm too high to get through. its so close that if i force it it will go.
so my question is, if i get a fork with a slightly lower rake (maybe 5mm less), will i be able to do barspins without sacraficing too much of my handeling? thanks |
p.s. if anyone has specific forks in mind that wont break the bank or even a quick fix i dont know about that would be great too.
|
Uh... think a straight fork would work? I don't know. Somafab.com has a straight fork if that WOULD work.
|
barspin clearance has to do more with axle to crown length (rake too). a longer axle to crown will let you barspins with fatter tires. your best bet to barspin on a 700c meant for would be to look for a "straight bladed" fork. otherwise 400a-c 26" forks will work.
what size tires are you running now? if not 23c those would probably be your best bet to barspin without clipping your downtube. |
24 inch wheel
/thread |
you mean a 650 or a 26" wheel. not a 24". 24 would make the bike look even more dumb than a 26 or a 650. He asked about forks btw.. not wheels.
|
Originally Posted by Dinosaur88
(Post 10310138)
. your best bet to barspin on a 700c meant for would be to look for a "straight bladed" fork. otherwise 400a-c 26" forks will work.
Straight blade: http://bikeisland.com/images/120809028.JPG Zero rake: http://www.odysseybmx.com/dailyword/...steering-2.jpg |
All times are GMT -6. The time now is 06:10 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.