Sugino 75 ISO which BB?
04-08-11 | 09:39 PM
#1
Thread Starter
Senior Member
Joined: Nov 2008
Posts: 333
Likes: 4
From: Shinjuku, Tokyo
Bikes: Nagasawa Special Track
Sugino 75 ISO which BB?
Sugino says the below on their website.
wouldn't any square tapered ISO bb such as Hatta Swan 9400 work with these
cranks?
Note :
SG75 144 cranks are intended to be used exclusively in combination with BB-SG75 and shall not be used with other BB.
wouldn't any square tapered ISO bb such as Hatta Swan 9400 work with these
cranks?
Note :
SG75 144 cranks are intended to be used exclusively in combination with BB-SG75 and shall not be used with other BB.
04-08-11 | 09:41 PM
#2
THE STUFFED
Joined: Oct 2009
Posts: 12,671
Likes: 21
From: San Francisco, CA
Bikes: R. Sachs Simplicity; EAI Bareknuckle; Madone Gen 8
Well of the correct length....
Yes the hatta will work, as well as sugino's 2 (the 75 & superlap), as well as campy's, and philwood's (although they recommend a slightly different length), and that super cheap protype one from ben's; but why compromise the BB when you clearly didn't on the crankset?
Yes the hatta will work, as well as sugino's 2 (the 75 & superlap), as well as campy's, and philwood's (although they recommend a slightly different length), and that super cheap protype one from ben's; but why compromise the BB when you clearly didn't on the crankset?
04-08-11 | 09:44 PM
#3
Thread Starter
Senior Member
Joined: Nov 2008
Posts: 333
Likes: 4
From: Shinjuku, Tokyo
Bikes: Nagasawa Special Track
my frame comes with the Hatta Swan pre-installed. And I've seen the Sugino 75 cranks on probably 60% of njs frames. I was just surprised to see that
note on their site.
note on their site.
04-08-11 | 10:02 PM
#4
THE STUFFED
Joined: Oct 2009
Posts: 12,671
Likes: 21
From: San Francisco, CA
Bikes: R. Sachs Simplicity; EAI Bareknuckle; Madone Gen 8
Thread
Thread Starter
Forum
Replies
Last Post
cleanupinaisle3
Singlespeed & Fixed Gear
2
05-10-10 12:42 PM
Silkworm
Track Cycling: Velodrome Racing and Training Area
4
03-04-10 03:51 AM
