[Brompton] Leather or cork ergonomic grips?
#1
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Paris, France
Posts: 2,497
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 573 Post(s)
Liked 118 Times
in
99 Posts
[Brompton] Leather or cork ergonomic grips?
Hello
For touring with an M handlebar, I'd like to replace the standard foam grips for some that have the following features:
I have a couple of questions:
Thank you.
--
Edit: One more requirement : the barends must not prevent adding a rearview mirror.
For touring with an M handlebar, I'd like to replace the standard foam grips for some that have the following features:
- ergonomic
- leather or cork
- barends to allow for two or three different hand positions, and small enough to not prevent folding.
I have a couple of questions:
- Can the Ergon GP1 BioLeder grips take barends? Alternatively, are the GP3/GP5, and GC1 compatible with an M handlebar?
- Besides Ergon, are there other brands of grips I should know about that satisfy those requirements?
Thank you.
--
Edit: One more requirement : the barends must not prevent adding a rearview mirror.
Last edited by Winfried; 11-17-16 at 10:14 AM.
#2
Banned
For bar ends, IMO, you want the GR 2or3 series.. they are integrated.. not add-ons,
I use the GR3 on my M3L, it does not interfere with the bar fold down .
GR5 does ... You have to loosen the bar end/grip clamp bolt, and turn the long Bar end, to fold the mast down.
Dont need to fold the bar down and that wont be as important..
I got the double grip shift version, (Black rubber, Grey patch)
I, on M bars, Filled in the difference with short sections of round grip.. between grip end & brake lever band
the New Ones appear to have a Plug that can be left out ,
but still a Bar end Mirror can only be mounted on the side that does not hit the ground when bar mast is folded down,
that leaves option of Only a Right side Mirror.
In GP3 bio-cork , only right side is made shorter for IGH grip shifts, so you'd have to saw the inside end shorter..
so maybe get the razor saw out . "measure twice , cut once"
...
I use the GR3 on my M3L, it does not interfere with the bar fold down .
GR5 does ... You have to loosen the bar end/grip clamp bolt, and turn the long Bar end, to fold the mast down.
Dont need to fold the bar down and that wont be as important..
I got the double grip shift version, (Black rubber, Grey patch)
I, on M bars, Filled in the difference with short sections of round grip.. between grip end & brake lever band
the New Ones appear to have a Plug that can be left out ,
but still a Bar end Mirror can only be mounted on the side that does not hit the ground when bar mast is folded down,
that leaves option of Only a Right side Mirror.
In GP3 bio-cork , only right side is made shorter for IGH grip shifts, so you'd have to saw the inside end shorter..
so maybe get the razor saw out . "measure twice , cut once"
...
Last edited by fietsbob; 11-17-16 at 10:37 AM.