![]() |
Pinion Gear Box Minimum Temp
I have been cautious to avoid commuting under 5°F because the manual said that is the minimum operating temperature, but I recently reached out to a Pinion technician who said the main consideration with temperature is the gearbox becoming pressurized when you bring it back inside from extreme cold. Nothing operationally will damage the gearbox in temperatures below 0, but because the gearbox is completely sealed, a rapid increase in temperature can cause pressure to build inside the gearbox. The pressure won’t hurt the gearbox but can push some oil past the seals causing a temporary oil leak. In that case put a sheet of cardboard under it in the winter then change the oil every spring to make sure it’s still topped up.
http://cimg9.ibsrv.net/gimg/bikeforu...70fa80b37.jpeg |
Originally Posted by Thigh Master
(Post 23682218)
... then change the oil every spring to make sure it’s still topped up.
My approach would be either to leave the bike in the cold when not in use, or instead plan on opening the oil fill port when brought inside to equalize the pressure as it returns to room temp. I'd also want to explore the question with a techy of whether a lower viscosity gear lube would be of advantage when used at low temps outside. Standard stuff may become rather thickish, making pedaling less efficient and maybe also not doing the best job possible of reducing friction in bearings and on gear teeth. It's not like you're gonna be pedaling furiously along enough that friction alone's gonna warm that gear case much.... (BTW I'd like to see your '15 Tarmac Disc sometime here. I bought a '23 model late in '24, love it when I can ride it outside!!) |
Originally Posted by spclark
(Post 23682240)
OK, so the increased temp coming back in boosts internal pressure? That to my thinking means that, once subjected to cold temps, a gearbox's internal pressure's decreased, maybe causing a small amount of air to be sucked past its seals, yes? It's THAT additional air that expands once warmed, leading to potential for oil leak... no matter how temporary.
My approach would be either to leave the bike in the cold when not in use, or instead plan on opening the oil fill port when brought inside to equalize the pressure as it returns to room temp. I'd also want to explore the question with a techy of whether a lower viscosity gear lube would be of advantage when used at low temps outside. Standard stuff may become rather thickish, making pedaling less efficient and maybe also not doing the best job possible of reducing friction in bearings and on gear teeth. It's not like you're gonna be pedaling furiously along enough that friction alone's gonna warm that gear case much.... (BTW I'd like to see your '15 Tarmac Disc sometime here. I bought a '23 model late in '24, love it when I can ride it outside!!) |
Mine...
https://cimg8.ibsrv.net/gimg/bikefor...6d2399b5b.jpeg
I like to climb, there's a lot of that where I ride now, but I'm not too fast at it. |
| All times are GMT -6. The time now is 12:09 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.