First folder again
#1
Member
Thread Starter
Join Date: Jan 2007
Location: Ventura, CA
Posts: 36
Bikes: Bike Friday Tikit, Brompton M3LA
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
First folder again
Just received a Dahon Stowaway that I bought on ebay. I had one years ago. Just have to get the shifter to work. Hope it's just needs to be adjusted.
#2
smallwheelsonly
Join Date: Jan 2009
Location: Ca.
Posts: 279
Bikes: SmallWheelOnly
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
is it an internal hub type? 3 speed Sturmey-ARcher? some vintage dahons had 5/6 spd derailleur system.
it its the Sturmey Archer internal hub try lubing the hub and the shifting cable. if the hub has an oil hole shoot it there if not shoot oil into the indicator rod entry hole[by removing it first]
it its the Sturmey Archer internal hub try lubing the hub and the shifting cable. if the hub has an oil hole shoot it there if not shoot oil into the indicator rod entry hole[by removing it first]
#3
Member
Thread Starter
Join Date: Jan 2007
Location: Ventura, CA
Posts: 36
Bikes: Bike Friday Tikit, Brompton M3LA
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thank you. It is a Sturmey-Archer 3 speed. It was the cable in the shifter, just had to move it to the right position and adjust it at the hub. It is working fine now. What kind of oil should I use, there is a oil hole in the hub?
#4
Senior Member
Join Date: Oct 2009
Location: Houston, TX
Posts: 159
Bikes: Brompton H6L, DT Mini, DT 9FS, Dahon Ciao P8, Dahon Classic 3(x2), Dahon TR, R20, Raleigh Chopper III, Auto Mini Jr., Mercier Nano, Giant Anyroad2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
According to the old Dahon manual use 20 wt oil. Filling the hub was a problem initially but I bought an anti-freeze tester from an auto parts store and some clear, lawn mower fuel line. Remove the balls in the tester, cut the fuel line to desired length, bevel one end to fit the hub filler hole.
#6
Senior Member
Join Date: Oct 2009
Location: Houston, TX
Posts: 159
Bikes: Brompton H6L, DT Mini, DT 9FS, Dahon Ciao P8, Dahon Classic 3(x2), Dahon TR, R20, Raleigh Chopper III, Auto Mini Jr., Mercier Nano, Giant Anyroad2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Here's a link to download one. It's not the exact one for your bike but it should help https://www.mediafire.com/?zdoikjw4bon