Trek 520 handlebar advice
#1
Member
Thread Starter
Join Date: Jun 2005
Location: Mississippi
Posts: 33
Bikes: Trek 520, Giant Innova, Breezer Liberty on order
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Trek 520 handlebar advice
I am in need of some brainstorming for alternate handlebars for my Trek 520. I am riding a 21" bike and with an adjustable stem extender I have been able to produce a fairly comfortable reach to the tops and hoods. The problem lies with the brakes. My hands are too small to comfortably reach the brakes. Only the tips of my fingers can reach and this is becoming more and more uncomfortable as I have arthritis in my hands.
I would like to keep my bar end shifters (I've become quite fond of them) and switch to handlebars that would give me more comfortable braking and perhaps even a more upright riding position. I find that the older I get, the more comfortable a slightly more upright riding posture is. I don't ride in the drops often, but appreciate them when the wind kicks up.
What are my options?
Thanks!
I would like to keep my bar end shifters (I've become quite fond of them) and switch to handlebars that would give me more comfortable braking and perhaps even a more upright riding position. I find that the older I get, the more comfortable a slightly more upright riding posture is. I don't ride in the drops often, but appreciate them when the wind kicks up.
What are my options?
Thanks!
#2
aspiring wannabe
Join Date: Oct 2004
Location: timaru/oamaru, new zealand
Posts: 288
Bikes: trek 520, thorn nomad, giant yukon, avanti aggressor, bauer racing bike, couple of other projects ...
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by Mississippimom
I am in need of some brainstorming for alternate handlebars for my Trek 520. I am riding a 21" bike and with an adjustable stem extender I have been able to produce a fairly comfortable reach to the tops and hoods. The problem lies with the brakes. My hands are too small to comfortably reach the brakes. Only the tips of my fingers can reach and this is becoming more and more uncomfortable as I have arthritis in my hands.
I would like to keep my bar end shifters (I've become quite fond of them) and switch to handlebars that would give me more comfortable braking and perhaps even a more upright riding position. I find that the older I get, the more comfortable a slightly more upright riding posture is. I don't ride in the drops often, but appreciate them when the wind kicks up.
What are my options?
Thanks!
I would like to keep my bar end shifters (I've become quite fond of them) and switch to handlebars that would give me more comfortable braking and perhaps even a more upright riding position. I find that the older I get, the more comfortable a slightly more upright riding posture is. I don't ride in the drops often, but appreciate them when the wind kicks up.
What are my options?
Thanks!
pictures of my trek 520 here or email me and i can send you some decent pics of the set up ... the webpage on this bike needs updating, but it is similar to this too
#3
Member
Join Date: May 2006
Location: Edmonton Alberta
Posts: 46
Bikes: Bike Friday (NWT), Rocky Mountain Blizzard 30.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have similar problem with my Trek 20 which I just purchased this spring. I am 60 and find that I rarely ride on the drops. I have been back to the LBS to have the set up adjusted but the young folks there don't seem to understand touring or older folks. I tell them that I want to be more upright and they send me on my way and tell me to give the adjustments sometime. I am about to look for a professional or another LBS that will listen to me. I also have a mountain bike and but I find that after awhile my wrists get numb so I am reluctant to switch to straight bars on my Trek. I am open to suggestions as well.
Thanks
Thanks
#4
Fred E Fenders
Join Date: Feb 2006
Location: Again! Philippines & S. California
Posts: 1,453
Bikes: Jamis Aurora Elite
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Give some thought to getting some aero levers with a short throw for small hands. Check out Rivendell Bikes on the internet and get one of their catalogues. Riv. Bikes has a lot of options for you - even the mounts to turn your bar ends into thumbies.
Cane Creek Levers:
https://www.rivbike.com/webalog/brakes/15123.html
Handlebars:
https://www.rivbike.com/webalog/handlebars_stems_tape/
Check their catalogue for the bar end converters to thumb shifters.
Cane Creek Levers:
https://www.rivbike.com/webalog/brakes/15123.html
Handlebars:
https://www.rivbike.com/webalog/handlebars_stems_tape/
Check their catalogue for the bar end converters to thumb shifters.
Last edited by fthomas; 07-04-06 at 02:31 AM.
#5
Senior Member
Join Date: Jul 2003
Location: Boulder, CO
Posts: 8,546
Mentioned: 83 Post(s)
Tagged: 0 Thread(s)
Quoted: 163 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
GUYS, STOP!!!
Ok, here's a solution. It's easy and nearly free.
I too have a 520, and I have really little hands. I could barely reach the levers.
A friend did this for me, he is good at mechanical stuff.
Shim the brake levers as follows. Cut a small piece of plastic into a wedge shape. We used the 'head' of a large zip-tie, cut off the tie part, and shaved it with an exacto knife until it was the right size/shape. We then used epoxy to glue it to the inside of the brake. On my first 520, we glued it to the moving part of the lever, but when I got my 2nd 520, I just pulled the shims off the remains of the first ones and glued them to the top of the lever. This is hard to explain, I'm attaching a picture.
That's it! Just let out a little cable. The levers sit closer to the bars, and you have to adjust the brakes pads pretty close in, but there is still plenty of pull.
Cheers! And thanks Dave D for doing this for me.
Anna
Ok, here's a solution. It's easy and nearly free.
I too have a 520, and I have really little hands. I could barely reach the levers.
A friend did this for me, he is good at mechanical stuff.
Shim the brake levers as follows. Cut a small piece of plastic into a wedge shape. We used the 'head' of a large zip-tie, cut off the tie part, and shaved it with an exacto knife until it was the right size/shape. We then used epoxy to glue it to the inside of the brake. On my first 520, we glued it to the moving part of the lever, but when I got my 2nd 520, I just pulled the shims off the remains of the first ones and glued them to the top of the lever. This is hard to explain, I'm attaching a picture.
That's it! Just let out a little cable. The levers sit closer to the bars, and you have to adjust the brakes pads pretty close in, but there is still plenty of pull.
Cheers! And thanks Dave D for doing this for me.
Anna
#6
Senior Member
Join Date: Mar 2006
Location: In a cardboard box by Alki beach.
Posts: 343
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
How about installing cyclo-cross style interupter brake levers on the bars?
Like these:
https://www.performancebike.com/shop/...lisearch=true#
Like these:
https://www.performancebike.com/shop/...lisearch=true#
#7
Member
Thread Starter
Join Date: Jun 2005
Location: Mississippi
Posts: 33
Bikes: Trek 520, Giant Innova, Breezer Liberty on order
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by wajg3
I have similar problem with my Trek 20 which I just purchased this spring. I am 60 and find that I rarely ride on the drops. I have been back to the LBS to have the set up adjusted but the young folks there don't seem to understand touring or older folks. I tell them that I want to be more upright and they send me on my way and tell me to give the adjustments sometime. I am about to look for a professional or another LBS that will listen to me. I also have a mountain bike and but I find that after awhile my wrists get numb so I am reluctant to switch to straight bars on my Trek. I am open to suggestions as well.
Thanks
Thanks
I am thinking that perhaps a set of trekking handlebars might solve my problem. I checked out Sheldon Brown's page on handlebars (www.sheldonbrown.com/deakins/handlebars.html) and it looks like the trekking bars are an option. Whatcha think?
#8
Member
Thread Starter
Join Date: Jun 2005
Location: Mississippi
Posts: 33
Bikes: Trek 520, Giant Innova, Breezer Liberty on order
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by fthomas
Give some thought to getting some aero levers with a short throw for small hands. Check out Rivendell Bikes on the internet and get one of their catalogues. Riv. Bikes has a lot of options for you - even the mounts to turn your bar ends into thumbies.
Cane Creek Levers:
https://www.rivbike.com/webalog/brakes/15123.html
Handlebars:
https://www.rivbike.com/webalog/handlebars_stems_tape/
Check their catalogue for the bar end converters to thumb shifters.
Cane Creek Levers:
https://www.rivbike.com/webalog/brakes/15123.html
Handlebars:
https://www.rivbike.com/webalog/handlebars_stems_tape/
Check their catalogue for the bar end converters to thumb shifters.
#9
Junior Member
Join Date: Mar 2006
Location: vancouver, bc
Posts: 10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
i've adjusted well to the brakes on my 520, but you can ask your LBS to install 2nd brake levers that hang below the top bars -- you can clutch them with your hands to brake. my LBS suggested them to me and they're only about $14 plus installation.
#10
Senior Member
Join Date: Jun 2004
Posts: 1,293
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I'm guessing part of the problem is the brake cable is adjusted too tight and the brakes too hard to pull for you. Try letting out some cable-- this might do the trick.
Those smaller Crane Creek levers are very nice-- I have smaller hands and I love them.
Trekking bars are cheap if you wish to try this route-- although changing the stem might be a better method for you (you are happy with the bar-end shifters?)
I'd start with these things and keep making changes until you're happy.
Those smaller Crane Creek levers are very nice-- I have smaller hands and I love them.
Trekking bars are cheap if you wish to try this route-- although changing the stem might be a better method for you (you are happy with the bar-end shifters?)
I'd start with these things and keep making changes until you're happy.
#11
Year-round cyclist
Join Date: Apr 2002
Location: Montréal (Québec)
Posts: 3,023
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Originally Posted by Mississippimom
...I am currently riding between 80 and 150 miles a week preparing for a Natchez Trace tour and my more mature body is requesting a more upright riding posture and less of a reach for the bars. I am thinking that perhaps a set of trekking handlebars might solve my problem. ... Whatcha think?
Why not simply raise the handlebars?
You could get this stem for a threaded headset, or
one of these stems or risers for a threadless headset.
In a nutshell, both are ways to get your handlebars level or even higher than your saddle, which means they also need to get closer to you at the same time. You may even size your new stem so that the drops become a very useful or even a preferred position. And the beauty is that you keep your existing handlebars and therefore you don't need to change brake levers, shifters, etc.
#12
Gemutlichkeit
Join Date: Dec 2005
Posts: 2,423
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
You want up-right comfort? This conversion cost me $65. North Road bars, decent MTB levers (Avid SD-7), and an adjustable stem. The Brooks B-67 cost another $85 incl S&H. Lots of arthritis, bad back and carpal tunnel issues. I've ridden several centuries and routinely go 50 - 80 miles on any given day. I rack up between 120 and 180 miles/week. The bars are currently even with the saddle instead of above, as in the second pic. Also, this is not a slow bike although it looks a little fuddy-duddy. It really covers ground.
The bar-ends go right in and work fine. This may work for you. Good luck.
before:https://i6.tinypic.com/1z1wy9s.jpg
after:https://i6.tinypic.com/1z1wz1d.jpg
The bar-ends go right in and work fine. This may work for you. Good luck.
before:https://i6.tinypic.com/1z1wy9s.jpg
after:https://i6.tinypic.com/1z1wz1d.jpg
#13
Member
Thread Starter
Join Date: Jun 2005
Location: Mississippi
Posts: 33
Bikes: Trek 520, Giant Innova, Breezer Liberty on order
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by valygrl
GUYS, STOP!!!
Ok, here's a solution. It's easy and nearly free.
I too have a 520, and I have really little hands. I could barely reach the levers.
A friend did this for me, he is good at mechanical stuff.
Shim the brake levers as follows.
Anna
Ok, here's a solution. It's easy and nearly free.
I too have a 520, and I have really little hands. I could barely reach the levers.
A friend did this for me, he is good at mechanical stuff.
Shim the brake levers as follows.
Anna
I would still like to be more upright, but I have no more room on my stem extender. I think I'll just tilt the handlebars towards me a bit more and if that doesn't do it I will go with one of the other solutions. My limited budget is an issue. It's between putting more bucks into my bike or paying my daughter's and son's college tuition bills next month. LOL!
Thanks again all, for the great ideas.
#14
Ultra-clydesdale
Join Date: Apr 2006
Location: Sacramento, CA or St Paul, MN
Posts: 572
Bikes: Titus Racer-X AL/Trek 520(RIP)/Trek 930
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have you tried new gloves?
I had some serious numbness issues even after lots oif tweaking. I just picked up some Specialized BG Gel gloves. I can now feel my fingers. This was after tring a number of other gloves. You'd be amazed at the difference.
This is for the numb people, not the OP.
I had some serious numbness issues even after lots oif tweaking. I just picked up some Specialized BG Gel gloves. I can now feel my fingers. This was after tring a number of other gloves. You'd be amazed at the difference.
This is for the numb people, not the OP.