Bianchi Ocelot found on the curb: is it worth repairing/turning into a touring bike?
#1
Member
Thread Starter
Join Date: Jul 2013
Location: Ontario, Canada
Posts: 27
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Bianchi Ocelot found on the curb: is it worth repairing/turning into a touring bike?
I found a Bianchi Ocelot few days ago. The frame is XL - perfect for myself.
While the frame, brakes, both derailleurs, and the handlebar are in decent shape, both wheels, freewheel, chain, and the crankset need to be replaced.
It looks like this one here:
It can take rear and front racks and has room for two bottle cages.
If I were to slap on some hybrid wheels/tyres, would this bike make a decent touring bike? Is this a decent Bianchi?
Many thanks!
P.S. This bike was discarded and it not stolen or missing! I knocked at the door of the house and was told to take it as the previous owner did not use it for a decade and did not feel like fixing it.
While the frame, brakes, both derailleurs, and the handlebar are in decent shape, both wheels, freewheel, chain, and the crankset need to be replaced.
It looks like this one here:
It can take rear and front racks and has room for two bottle cages.
If I were to slap on some hybrid wheels/tyres, would this bike make a decent touring bike? Is this a decent Bianchi?
Many thanks!
P.S. This bike was discarded and it not stolen or missing! I knocked at the door of the house and was told to take it as the previous owner did not use it for a decade and did not feel like fixing it.
Last edited by kebbs; 08-06-13 at 09:38 PM. Reason: Mentioning the bike is not stolen
#3
Member
Thread Starter
Join Date: Jul 2013
Location: Ontario, Canada
Posts: 27
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I thought so too, but I knocked at the residence where the bike was discarded and was told to take it The gentleman had no use for it and did not feel like fixing it.
#5
Senior Member
Join Date: Jan 2007
Location: NE Tx
Posts: 2,766
Bikes: Tour Easy, Linear USS, Lightening Thunderbolt, custom DF, Raleigh hybrid, Felt time trial
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
As you say it's a good fit and has a frame suitable for touring, then yes, it would make a decent touring bike. After you get all the components into mechanically reliable condition. After riding for awhile, you'll probably want to do some tweeking here and there to meet your personal preferences. Gear ratios, cockpit design, saddle, etc.
I guess you've already checked the integrity of the frame.
You state it was a discard, thus free to you. Congrats on your good luck. Pretty amazing find.
I guess you've already checked the integrity of the frame.
You state it was a discard, thus free to you. Congrats on your good luck. Pretty amazing find.
#6
Junior Member
Join Date: Apr 2014
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I actually picked one up a green '96 one last year off of craigslist for $20 everything worked fine and was in decent shape. it had three small chips in the paint chips on the frame, no seat (zoom seat post fused or frozen in place), and the rear spokes being a little rusted i felt it was good with a little tlc. although i still cant get the seat post out, i love this bike. i tuned it up myself, threw a seat on it, and ride it every chance i can. i ended up disassembling the rims cleaning all parts, and sanded all the rust off of each spoke. i took only 36 of the nipples and lightly sanded off the first layer of finish to expose the brass. i had some left over spay paint from old projects and painted the hubs metallic red, the spokes gold, and the inside of the rim (not the sides) black. when reassembling the wheels after paint i every other spoke nipple with an exposed brass one. it looks awesome like professional "Street Bobber" style wheels everyone likes it. all in all it took me 2 days to do this, but it was worth it.
#7
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
I'd get some butterfly bars for it and slicks but otherwise try to recycle as much as possible. It will make a great touring/trekking bike. Nice find.
#8
Senior Member
Join Date: May 2007
Location: Raleigh, NC
Posts: 8,896
Bikes: Waterford RST-22, Bob Jackson World Tour, Ritchey Breakaway Cross, Soma Saga, De Bernardi SL, Specialized Sequoia
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 196 Post(s)
Likes: 0
Liked 6 Times
in
4 Posts
Some of the old rigid mountain bikes can be made into great touring bikes. Personally, I would add drop bars.
My wife has an old Giant mountain bike with similar features and geometry. I installed a rear rack and slick tires, and it's now a great road bike if weight is not an issue.
My wife has an old Giant mountain bike with similar features and geometry. I installed a rear rack and slick tires, and it's now a great road bike if weight is not an issue.
#9
Banned
+1... Figure 8 bend Trekking bars are a low cost conversion for straight bar bikes , because about all you need is the bars ..
all the levers will transfer, both being a 7/8" (22.2mm) tubing and 1" centers..
drop bar will be considerably more expensive a proposition ..
in addition a bearing overhaul before heading off on a remote track would be wise.
weight in the panniers is best handled with a heavier frame ..
there will be no brakes if you change the rim diameter ..
if you want a 700c wheel touring bike , flip that one and go buy what you want.
all the levers will transfer, both being a 7/8" (22.2mm) tubing and 1" centers..
drop bar will be considerably more expensive a proposition ..
in addition a bearing overhaul before heading off on a remote track would be wise.
weight in the panniers is best handled with a heavier frame ..
If I were to slap on some hybrid wheels/tyres, would this bike make a decent touring bike?
if you want a 700c wheel touring bike , flip that one and go buy what you want.
Last edited by fietsbob; 04-15-14 at 08:52 AM.
#10
Senior Member
Drop bars can be added cheaply enough if stem shifters are used, they get a bum rep from bike snobs but they work fine and play nicely with different speeds and mountain bike front derailleurs. Any bike shop in Canada can order you some basic MTB wheels built around sun cr-18 or alex rims that will be perfectly serviceable for touring. A pair of smooth 1.75 or 2.00 tires will make for a plush ride too. I've set up a few MTB style touring bikes for friends looking to do budget touring builds.
#11
Banned
Ive got a drop bar touring bike and a trekking bar MTB, also a touring/trekking bike , (the latter gets more use)
to do the MTB to drop bar switch, bars, brake levers m bar end shifters , the cables to hook them all up and new housing
The Stem reach as is may not be right , either in height or reach .. and few Road bars are 1" centers ,so whole handlebar assembly
stem and all would be pulled set aside and starting over is the needed path .. .
to do the MTB to drop bar switch, bars, brake levers m bar end shifters , the cables to hook them all up and new housing
The Stem reach as is may not be right , either in height or reach .. and few Road bars are 1" centers ,so whole handlebar assembly
stem and all would be pulled set aside and starting over is the needed path .. .
#12
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
Drop bars can be added cheaply enough if stem shifters are used, they get a bum rep from bike snobs but they work fine and play nicely with different speeds and mountain bike front derailleurs. Any bike shop in Canada can order you some basic MTB wheels built around sun cr-18 or alex rims that will be perfectly serviceable for touring. A pair of smooth 1.75 or 2.00 tires will make for a plush ride too. I've set up a few MTB style touring bikes for friends looking to do budget touring builds.
Thread
Thread Starter
Forum
Replies
Last Post
Stanger
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
2
06-14-10 02:44 PM