View Single Post
Old 12-17-09 | 10:29 AM
  #15  
robtown's Avatar
robtown
Muscle bike design spec
 
Joined: Oct 2004
Posts: 3,688
Likes: 3
From: Sterling VA

Bikes: 70 Atala Record Proffesional, 00 Lemond, 08 Kestrel Evoke, 96 Colnago Master Olympic, 01 Colnago Ovalmaster, 76 Raleigh Gran Sport, 03 Fuji World, 86 Paramount, 90 Miyata CF, 09 Ritchey Breakaway CX, Bianchi Trofeo, 12 OutRiderUSA HyperLite

Originally Posted by Al1943
With the chain on the smallest cog and smallest chainring does the chain go slack? Maybe the chain is too long and/or stretched?
Al
No, the chain length is good.

Originally Posted by Tom Velo Orange
there looks to be a little blip of metal in front of the rear derailleur mounting bolt. I don't think that should be there- it may need to be rotated or held in place as you thread the der into the frame.
...
The extra metal is a cam attached to derailleur complete with a spring mechanism and lock ring. I'm going with the theory this RD was originally off a bike w/o an integrated hanger and bolted on in a manner that secured the cam. Another clue is it turns out the bolt-on rear wheel is 27" and the front is 700c. Perhaps the previous owner damaged the rear wheel / RD.

I installed a different RD so the bike is up and running until I get a replacement 700c wheel.

Thanks all!
__________________
Korval is Ships
See my Hyperlite 411 it's the photo model on OutRiderUSA web page
robtown is offline  
Reply