I was just going over in my head my impressions. I did a small ride just to get it dialled in to me. 9 miles ove SE singletrack. I had very minimal tire rub on the inside chainstay. The frame is stiff but muted (if you can understand that) It mutes trail vibration very well but appears to be super stiff. I detected no flex from the frame. I do know that at 265lbs, I have been able to make most frames flex somewhat but this one performed fine. I am still working on h-bar placement, saddle fore and aft, and minor tweaks. There are no instructions on the Rockshox website to set up a Reba RLT. I put 180lbs in the positive chamber and 175lbs in the negative. Still got a little wallowing which I will have to adjust out as I continue to ride. The brakes were awesome. Very little break in. I think that may have been because it was a demo bike and they were already bedded but they stopped my big azz really good. Ibex owner has asked WTB to send me a 2.1 Nanoraptor which should stop the chainstay rub. At my weight, I can make wheels flex a good amount but could not make this frame flex. I have to say, the spec worked out fairly well. I was not familiar with the 2x10 drivetrain but after a turns of adjustment, it performed as well as my XT 3x9 drivetrain on my Specialized. Did I say the frame was stiff? Well, it is. It is not perfect but it has performed very well so far. I will be extending the ride distance and severity over the coming weeks. Any weaknesses will show up and I will let you know. So far, so good though.