View Single Post
Old 11-23-11 | 06:36 AM
  #33  
BluesDawg's Avatar
BluesDawg
just keep riding
 
Joined: Feb 2005
Posts: 13,560
Likes: 44
From: Milledgeville, Georgia

Bikes: 2018 Black Mountain Cycles MCD,2017 Advocate Cycles Seldom Seen Drop Bar, 2017 Niner Jet 9 Alloy, 2015 Zukas custom road, 2003 KHS Milano Tandem, 1986 Nishiki Cadence rigid MTB, 1980ish Fuji S-12S

Originally Posted by Wogster
As for rim widths, you need to refer to St Sheldon the patron saint of bicycle mechanics. Have a look at this page on tire sizing, go to the bottom of the page, then go up to a red and green chart, this will tell you that for a 32mm tire you need a rim between 15 and 19mm wide.
Note that Sheldon's chart shows inner width, where most rim sizes are shown as outer width. Subtract about 5mm to get the size applicable to his chart. A typical Open Pro rim is 19mm outer and 14mm inner width. So instead of being at the upper end of the recommended range for a 32mm tire, it is slightly under. OTOH, people run 32mm tires on Open Pros all the time with good results. YMMV.

Last edited by BluesDawg; 11-23-11 at 06:52 AM.
BluesDawg is offline  
Reply