View Single Post
Old 03-15-12 | 09:24 PM
  #2  
Darth_Firebolt's Avatar
Darth_Firebolt
Pokemon Master
 
Joined: Dec 2008
Posts: 1,107
Likes: 8
From: Arkansas

Bikes: All City Cosmic Stallion, Salsa Colossal, Surly Preamble, 1985 Schwinn High Sierra x3

put a flathead screwdriver between the pieces of the clamp, then rotate the screwdriver. cut the cable off above the clamp and pull it through to the bottom (as it's shown in the pic). i'm assuming the cable goes through the clamp and a hole in the bolt. yes/no?
Darth_Firebolt is offline  
Reply