Originally Posted by
Lightfoot21
G, I would much appreciate measurements, details and pictures. It seems I might have to go to a machinist, though I will keep hoping I run into a trashed derailleur with the mounting bolt still attached. No hurry, I can not get to town for another week or so.
Overall Length = 19mm
Head Diameter = 13mm
Inside diameter = 6mm (hex on the head side)
Shaft diameter = 10mm
Thread length = 8.5mm
Non-threaded length = 7.75mm
Threads are 10mm x 1.0mm
Nut is 14mm hex and is 3.1mm thick
Hope this helps.
-G
