Judging by the spacers (and my faded memory) this is a 126mm hub set up for a 6 or 7s spin-on freewheel.
The OP shouldn't rely on me here, but measure the axle over the locknuts, and the distance from the RH locknut face to the freewheel shoulder. For 6s o 7s, the shoulder to locknut width will be roughly 32-34mm. For a 5s it'll be closer to 27mm. Note that 7s requires 1-2mm more clearance than 6s (narrower spacing)
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.