my bad. confusion. you are right, sir.
9/16 was small, 19/32 didn't even get into the threaded hole, outside diameter being already too big.
Originally Posted by
unworthy1
I did not see 19/32" mentioned before, but did see 9/16" and yes that one will be too small since it's = to 14.28mm, however a 19/32" should be = to 15.081mm so unless the cheapo factory made it really way on the small end of tolerance, it should be a little bit
bigger than an "A" fit.
YRMV of course, especially when it comes to cheap tools (BTDT too many times to count
)