Yes just place appropriate sized bolt at the tip of the mounting screw at the opening on the lever assembly and push it in. It will push the mounting screw through the nylon retaining washer enough that you can pull at the head of the mounting screw to remove it from the lever. Not sure if you really need the nylon retainig washer to keep the lever working, but I try to always put it back into the lever to retain the screw. It keeps all the parts together when you have the lever off the bosses. To put back the nylon washer and mounting screw together in the lever, I use a short piece of aluminum tubing or something similar that will fit into the hole in back of the lever, drop in the washer into the hole, and push or turn the mounting screw back through it. Did it so many times that it's second nature for me now, and the short aluminum tube is a regularly used item in my tool box. As for taking the clutch spring and related hat shaped plastic bushing off the lever, it can be done by carefully picking at th spring tip at the lever slot with a small screw driver carefully with a small flat tipped screwdriver. But be aware that some are harder to take out than others, depending on the lever ' s condition.