I am attempting to compare my TriCross geometry to a SuperSix Evo, both in 52cm. Based on each manufacturers stack & reach measurements there should be a substantial difference between the two (Duh). I'm attempting to use the Bike Comparator Excel spreadsheet to visually see the differences. When plugging in the numbers from Cannondale's website the spreadsheets calc of stack & reach is within +/-2mm of the published specs. However when doing the same for the TriCross the stack & reach numbers outputted by the spreadsheet aren't even close to what Specialized published them as (roughly +10mm for reach & -30mm for stack from published numbers) and makes both geometries much more close.


*edit: I just took some detailed measurements on my TriCross and they correspond to what Spech has published for stack & reach. So I am obviously doing something wrong with the spreadsheet. Hrmm...