Thread: Cassette removal tool
View Single Post
Old 10-24-19 | 02:07 PM
  #9  
CliffordK's Avatar
CliffordK
Senior Member
10 Anniversary
Community Builder
Community Influencer
Active Streak: 30 Days
 
Joined: Nov 2014
Posts: 27,576
Likes: 5,480
From: Eugene, Oregon, USA
Originally Posted by Jeff Wills
SunTour AG (for "Alpine Gear") freewheel. This has a very wide range 14 tooth to 38 tooth setup. It requires a Park Tool FR-2: https://www.parktool.com/product/freewheel-remover-fr-2 and careful technique to remove the freewheel. (Freewheel removal has been discussed many times before and there are some good online how-to videos.)
OHHH!!! I was worried about not seeing "Megarange" written on the freewheel like Shimano usually does.

But, the two prong vs splined removal tool would be obvious once the wheel is removed and one looks at the freewheel. Plus the brand is usually inscribed on the center part of the freewheel.

As mentioned, be careful with removing a freewheel with a 2-prong tool (tighten the nut down on the tool, turn a bit, then slowly turn and release the nut).
CliffordK is offline  
Reply
0