Thread: Order of procedure and metal state
View Single Post
Old 07-09-20 | 06:47 PM
  #3  
Andrew R Stewart's Avatar
Andrew R Stewart
Senior Member
Titanium Club Membership
10 Anniversary
 
Joined: Feb 2012
Posts: 19,373
Likes: 5,515
From: Rochester, NY

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

Agreed, especially if the bending is near the tube ends. Depending on how the tube is being held during the bending some deformation (other then the intended bend) can happen so a pre mitered end could drift from best fit up. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Reply
0