Originally Posted by
robbyville
The wheels are rim brake variety. They act as my spare wheels for the Speedvagen but I was hoping to move them to the DeRosa. I had thought that since the DeRosa was able to handle Shimano 8spd which I believe was also 130mm that it would be able to handle the Campy driver since they did not increase the length between 8-11spds. I was hoping to simply change the Shimano freehub to a Campy one which I have received and installed. When I tried to test fit the wheel quickly, the width did not seem to be an issue but the axle diameter was.
On your Speedvagen, what type of rear dropouts does it have?
And could you post a photo of the axles on the Industry 9 hubs?
If the Speedvagen is a rim brake road bike I concur that it should be 130mm spacing from the inside of dropout to dropout. The part of the axle that protrudes past the end caps (or cones & locknuts whatever the case may be) could be ever so slightly too thick. This is why a few photos of the dropout & the axle ends would be enlightening....
I concur that checking with Industry 9 is a good idea as well.