Originally Posted by
Maelochs
I know what My eyes see ... but no one will believe anyone else until the OP actually says something---or posts pics which show the situation unequivocally..
Well my 24 hour post limit is up, so I am back. Indeed, the damage is merely paint having been scraped off, and there is no gouging of metal. Which is good news. In fact, somewhat embarrassingly, the right dropout had a flush plastic spacer that I did not see until accidentally pressing it out, as it blended in with the decades old grime. The axle now sits further in and I rode it today for a few miles: good enough to set a KOM!
Yes it is safe. It is sensible to go for some shorter rides before rushing out to do a long one. If you do experience any problems, you will not be far from home.
This is likely to be caused by the frame slightly out of alignment, or the hub off center. It could also be that what you call the 'groove on the frame' is longer one side than the other.
Line it up so the wheel is in the center and ride it.
Thank you for this suggestion! I had not considered the alignment of the bike, and it felt especially important to check, being a 30+ year old bike.
Originally Posted by
Maelochs
I have no problem with differences of opinion, and everyone has his or her own perceptions.
Did you look at that photo full-screen? To me the gouging of metal looks clear.
In any case ... to the OP .... if it is indeed just paint scraped off, ride on and enjoy. if it is indeed that the edges of the dropout are beveled .... well, if you don't post again we will know what happened.
The last thing I expected was to refashion a black/blue vs gold/white dress debate, just the bike version of it.
Thank you for all of the responses, I was not expecting so many of them. And they were all exceedingly helpful. I was able to properly inspect the dropout for damage as well as find the fix. I must be honest I was also not expecting hateful responses (@veganbikes), though what else is there to expect from somebody who advertises being vegan?