Originally Posted by
Doc_Wui
So make ten posts. You can answer these questions, one per post.
1, Is this a commercially purchased ebike or is it a home made job,
2, DO you know if the bike ever ran?
3. How many volts is the system.
4. Does it have a display that shows speed and battery level?
5. Is it throttle only or does it also have pedal assist?
6. Is the motor cable 3 thick wires only or does it also have smaller wires. How many smaller wires, their colors, and type of connector,
7. Do you own a mulitimeter?
8. Izzit true a pic is worth 1000 words?
absolutely I have a meter. I wasn’t sure how identify the leads with one though. Any guidance on that would be great!
it’s a 48V I think 1500W.
the bike was brought to me with everything on it where it had ran at one time. The controller was in a bag mounted to the frame. The hub motor on the bike and the wiring for it is figured out. What I have left to figure out are the brake lever wires, and the throttle/volt meter/on-off switch assembly.
I think pictures are a 1000 words. It won’t let me post them yet.
thanks for taking the time to reply. Hopefully we can get it figured out.