Mr. 66 I will try that, not like I can save the old seal for anything.
1simplexnut This is what the Phil hub looks like without the seal. The space that the seal covers is narrower and the center hole (where the axles is), looks to be wider.
Here is one email I had back from Phil Woods:Hello Wesley,
Unfortunately we do not have loose/extra bearings seals. The other issue is you have a older style bearing we had made for us by NTN, we currently have our bearings made for us by NSK. I do not believe the bearing seals are interchangeable. I have left a message with our engineering contact at NSK to see if they can tell me if their seal might work on a older NTN bearing. I will let you know what I hear back.
Best Regards,
Tomorrow I will try and see if the seal posted NTN bearing will fit.
Yep that makes sense . Doubt the nsk seal would fit .
That other pic from the net is just a generic bearing picture . Not a 6002 at all .
That is why it does not look dimensionally like yours .
Apart from some odd ball versions a 6002 is a 6002,dimensionally no matter who makes it but seal systems vary between brands
All good fun
Hope you get it sorted easily