Originally Posted by
SJX426
Used a 10 speed rear wheel from the De Rosa and validated that there is a problem.
Trued up the original, which minimized the issue.
Another option is using metal tape to build up the difference. Sticks well and has some small amount of thickness that will be easy to dial in the right amount. Plus it is easy to trim to the thickness of the DO.
Yet another would be to use a silicon carbide Dremel bit on the DS.
I would get the perfectly dished wheel in there without QR and centered, then measure the gap you have on the NDS that you would either have to fill or remove from the DS to get to center.
Or just dish the wheel to match the frame.