Originally Posted by KnoxBreezer
Do you think I can get the needed 3-4 inches of extra height out of the Nitto Dirtdrop stem? Harris appears to have a
Stem Raiser that add several inches to the stock stem. I'm assuming the Nitto Technomic stems won't give the amount of raise that I need, as these stems appear to have zero rise, dispite the longer quill.
I'm not familiar with the stem raiser however the
Nitto Dirtdrop stem if I remember correctly will give you at least an additional 3" of stem to work with. As high as mine is it's still not at the maximum height. However, the clamp diameter is 26.0mm so you will have to
shim your stock handlebar.
Originally Posted by KnoxBreezer
I don't know much about seatposts, but should I try to replace the stock suspension post with something that has a little setback? Would certain materials smooth out the ride (steel post vs carbon or alum posts)? The sprung Brooks saddle is attractive, and will be the replacement if I go this route. Is there much difference between the B67 and Champion Flyer?
I did a bit of research here on seatposts and found that the Thomson seatposts were rated quite favorably by many members here. I would recommend one with setback. The one on my bike is a Thomson Elite w/setback that was in used but like new condition I won on eBay at a very reasonable price. While you're at it I would also suggest you replace the POS OEM seat post clamp.
As to your other questions, I'm sure if you do a search here you'll find the answers you are looking for.