Originally Posted by
powdercoater4u
...automotive paints and they should work great. I would tape ... then use a scotch brite pad to dull out and rough up the surface of the powder coat where you'll put the second coat.
I use PPG's 2042 clear and no scuffing is needed. Just clean thoroughly with DX330 wax & grease remover and spray away!
Originally Posted by
powdercoater4u
...To get a good wet coat to flow and layout will probably lift the decals, maybe even lift and pucker them up because of the solvents used...
Generally that only applies to the old varnish-on style decals. Most of todays decals readily accept clear coating. Some are even made to go
under powdercoat clear!
BTW, PC4U, you should start this thread over in Classic & Vintage!
