Any suggestions? I've recently bought a recumbent that requires the following:
M
a
in
te
n
an
ce
a
nd
c
a
re
Tightening torques for screws
The values indicated are meant for a friction value µ=0,125 (greased threads and screw heads).They only refer to the in-
dicated parts.Please do always follow the values given in the manuals of the parts manufacturers since the following val-
ues may not be up to date due to changes in the product line!
part connection screw tightening torque
V-brake:
-brake lever handlebar/grip M6 SW5 4 Nm
-brake calliper calliper/frame M6 8–10 Nm
cable clamping 7–9 Nm
disc brake:
-brake lever handlebar/grip clamping M6 SW5 4 Nm
-brake lever compensation tank Torx T7 0,6 Nm
-brake calliper calliper/frame M6 SW5 6 Nm
-brake disc disk/hub M4 Torx T25 4 Nm
-brake housing brake lever SW8 4 Nm
dynamo dynamo/adaptor M6 SW5 6–8 Nm
adaptor/frame M5 SW4 4–6 Nm
suspension element element/frame M6 6–8 Nm
rear rack at the seat tube M6 SW5 8–10 Nm
rear swing arm axle/frame M8 17–19 Nm
b.b.set cartridge/frame 50–60 Nm
chain roller roller/frame M8 SW 6 17–19 Nm
crank crank/axle 35 Nm
chain ring screws 8–11 Nm
hub cassette ring 38–42 Nm
quick release wheel/frame 9–12 Nm
pedal pedal/crank SW15 35–40 Nm
shifter lever lever/adaptor 2,5–3 Nm
adaptor/handlebar SW6 5–6 Nm
derailleur derailleur/frame SW6 8–10 Nm
cable clamping 4–6 Nm
mudguard stay/frame M5 SW4 4–6 Nm
seat upper seat part / seat mt M6 SW4 5–6 Nm
lower seat part / frame M6 SW4 3–4 Nm
frame front boom clamping M8 SW6 14–16 Nm
front derailleur front derailleur/frame M5 SW5 5–6 Nm
cable clamping M5 SW5 4–6 Nm
USS stem length adjustment M6 SW5 8–10 Nm
main Axle / bearings 17–19 Nm
adaptor / steerer tube M8 SW6 30–32 Nm
headset clamp M5 SW4 4–6 Nm
steering rod / mounts M6 8–10 Nm
ASS stem stem / fork steerer tube M6 SW5 8–10 Nm
height adjustment M5 SW4 4–6 Nm