Need help Identifying a rear hub please.
10-25-15 | 09:41 PM
#1
Thread Starter
Member
Joined: Sep 2014
Posts: 49
Likes: 0
Need help Identifying a rear hub please.
I was planning on buying a new hub for pretty cheap from a guy but he has no idea what kind of hub it is. He thinking it came off of a Banshee Amp. But he also said the friend he got the hub from usaully always installs aftermarket parts on his bikes. So we both are unsure of the hub. Anybody have any idea what hub this is?
10-26-15 | 12:41 AM
#2
Senior Member
Joined: Apr 2009
Posts: 39,897
Likes: 3,865
From: New Rochelle, NY
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Generic, relatively low-end hub, most likely from Taiwan. I base that on the spoke holes which lack any elbow relief (extra manufacturing step), and mainly on the steel threaded axle with a cheap, stamped lockwasher.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
