Getting pedals off
05-06-05, 11:38 AM
#1
no surrender
Thread Starter
Join Date: Feb 2005
Posts: 140
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Getting pedals off
Should be easy right??
I have a pedal wrench but I cant get the damn things off. It's a 2005 Trek 1000. The left one is reverse threaded right? I cant make it budge. Is there something counter-intuitive about taking these damn things off? I can brace the crank arm and hold it steady...then apply a ton of pressure and nothing. ARG. Hints?
I have a pedal wrench but I cant get the damn things off. It's a 2005 Trek 1000. The left one is reverse threaded right? I cant make it budge. Is there something counter-intuitive about taking these damn things off? I can brace the crank arm and hold it steady...then apply a ton of pressure and nothing. ARG. Hints?
05-06-05, 01:07 PM
#2
Guest
Posts: n/a
Mentioned: Post(s)
Tagged: Thread(s)
Quoted: Post(s)
Do you have one of those longer wrenches or a short one? I have a short one, but the lever just isn't long enough to apply enough torque to get the pedals off. I got the professional one from Park Tool and it works just fine. I never have issues.
If you have the short wrench, you may have to take it in to a bike place and let them take the pedals off instead.
Koffee
If you have the short wrench, you may have to take it in to a bike place and let them take the pedals off instead.
Koffee
05-06-05, 01:22 PM
#3
Chronic Tai Shan
Join Date: Oct 2004
Location: PHL/BAL
Posts: 1,118
Bikes: Pake Single Speed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by koffee brown
If you have the short wrench, you may have to take it in to a bike place and let them take the pedals off instead.
Koffee
Koffee
05-06-05, 01:24 PM
#4
no surrender
Thread Starter
Join Date: Feb 2005
Posts: 140
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
It's a long wrench, but I got it figured out. Just took a LOT of force. I guess the LBS really torqued them down. Got my Speedplay Xs on there now 
(Thanks for replying, kind of a...awkward question...).
(Thanks for replying, kind of a...awkward question...).
05-06-05, 01:34 PM
#5
Keep on climbing
Did you grease up the threads on your speedplays and clean out some of the gunk from the crankarm's pedal threads? Bike pedals are tight, but it sounded like you needed some extreme measures to get them off. It's possible the LBS just overtorqued them, or it's possible they didn't grease the pedal threads at all.
A little grease and some cleanliness on the installation will make your job a lot easier should you ever need to take your new pedals off.
A little grease and some cleanliness on the installation will make your job a lot easier should you ever need to take your new pedals off.
05-06-05, 01:42 PM
#6
cyclist/gearhead/cycli...
Join Date: Oct 2004
Location: DC / Maryland suburbs
Posts: 4,166
Bikes: Homebuilt tourer/commuter, modified-beyond-recognition 1990 Trek 1100, reasonably stock 2002-ish Gary Fisher Hoo Koo E Koo
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Originally Posted by KevinF
A little grease and some cleanliness on the installation will make your job a lot easier should you ever need to take your new pedals off.
05-06-05, 02:17 PM
#7
I drink your MILKSHAKE
Join Date: Jul 2002
Location: St. Petersburg, FL
Posts: 15,061
Bikes: 2003 Specialized Rockhopper FSR Comp, 1999 Specialized Hardrock Comp FS, 1971 Schwinn Varsity
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Thirded
__________________
05-06-05, 02:19 PM
#8
slower than you
Join Date: Mar 2004
Location: dairy country NY
Posts: 652
Bikes: Gunnar Road Sport, peugeot UO-10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Yep, major torque needed here. Left one removes clockwise. Remember the "never-seize" on the threads and this will never happen again.
05-06-05, 02:47 PM
#9
Spoked to Death
Join Date: Jul 2004
Location: Boulder, CO
Posts: 1,335
Bikes: Salsa La Cruz w/ Alfine 8, Specialized Fuse Pro 27.5+, Surly 1x1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Glad you solved the problem, but let me throw in two little suggestions for the future and for other readers... Using grease on the pedals when you install them is a good thing, but if you didn't install them, try using a little PBlaster, which is a penetrating lubricant you can get in auto parts stores (the packaging looks like its out of the 50s or something), and it just rocks the pants off of WD40 for penetrating and loosening corroded or rusted threads.
Also, forget the 'reverse threaded' and 'lefty loosey lefty tightey' business. Here is how I remember how the pedals are threaded. Put the wrench on the pedal, and turn it towards the front of the bike to tighten, and towards the rear of the bike to loosen. That is true on both sides of the bike, no matter what. Should be helpful to other numbskulls like myself who kept forgetting which side was threaded in what way. To the front = tighter, to the back = looser.
peace,
sam
Also, forget the 'reverse threaded' and 'lefty loosey lefty tightey' business. Here is how I remember how the pedals are threaded. Put the wrench on the pedal, and turn it towards the front of the bike to tighten, and towards the rear of the bike to loosen. That is true on both sides of the bike, no matter what. Should be helpful to other numbskulls like myself who kept forgetting which side was threaded in what way. To the front = tighter, to the back = looser.
peace,
sam
