Seat angle adjust problem
03-24-19 | 06:40 AM
#1
Thread Starter
Senior Member
Joined: Jul 2012
Posts: 742
Likes: 4
From: Creede CO in summer & Okeechobee, FL or TX Gulf Coast in winter
Bikes: Zenetto Stealth road bike & Sundeal M7 MTN bike
Seat angle adjust problem
Just installed new saddle and want to make very slight angle adjustment. Won't move. Carbon fiber aero seat post and it has not been moved for over five years. Both metal clamshells are frozen. I tried light tapping with a drift pin thru bolt hole to opposite side but afraid to get aggressive.
03-24-19 | 08:47 AM
#2
Senior Member
Joined: Feb 2012
Posts: 19,352
Likes: 5,469
From: Rochester, NY
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
So decide which is more important- saving the seat, the post or not making any adjustment (for now...). 5 years of neglect is way too long for a bike part to get service. Toss in reactive materials and the likely lack of assembly compounds and you end up here. Andy
__________________
AndrewRStewart
AndrewRStewart
