Strange frame alignment problem
05-11-23 | 04:27 AM
#51
Thread Starter
Newbie
Joined: Dec 2018
Posts: 8
Likes: 0
I didn't get another rear wheel with 130 mm spacing so I went with S2 Duomatic wheel and with some washers. The wheel was again tilted to left. So no bent axle this time.
Next I will get good big level and go through seat tube and down tube. Properly this time.
Next I will get good big level and go through seat tube and down tube. Properly this time.
05-11-23 | 11:44 AM
#52
Senior Member
Joined: Apr 2016
Posts: 3,814
Likes: 1,756
If you flip the wheel and the offset is still the same then it's not a wheel dish problem. He already did that.
05-12-23 | 03:11 AM
#53
Newbie
Joined: Jun 2021
Posts: 39
Likes: 9
From: Finland
Are the rear dropouts in "middle" when considering bottom bracket? Did you use the string method described here? https://sheldonbrown.com/frame-spacing.html
Did you widen the fork with 2x4" according to Sheldon's instructions or how did you do it?
Are the seatstays straight?
Did you widen the fork with 2x4" according to Sheldon's instructions or how did you do it?
Are the seatstays straight?
