Rouluer crank arm removal.
05-06-07 | 08:25 AM
#1
Thread Starter
Junior Member
Joined: Aug 2006
Posts: 11
Likes: 0
Rouluer crank arm removal.
Besides purchasing the Park CCP-4 crank removal tool, is there any other way to remove these cranks.
I only have 1 Truvativ crank in my collection, so I don't want to buy this tool if I can avoid it.
I only have 1 Truvativ crank in my collection, so I don't want to buy this tool if I can avoid it.
05-06-07 | 09:23 AM
#2
Senior Member
Joined: Aug 2005
Posts: 33,657
Likes: 1,119
From: Pittsburgh, PA
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
I assume it's an ISIS bb and you need a plug to fit into the hollow spindle and give a conventional crank puller something to press against. Shimano includes one (TL-FC15) with their 105 Octalink cranks and these may also work in your Truvative. See if your LBS can lend or sell you one. Bike Tools Etc. sells them as an accessory too.
I've heard of using a dime or a small washer as an insert but have never tried it myself.
I've heard of using a dime or a small washer as an insert but have never tried it myself.
