Chainring Compatibility
01-26-12 | 05:28 PM
#1
Thread Starter
Senior Member
Joined: Mar 2004
Posts: 1,664
Likes: 3
From: San Diego, CA
Bikes: See sig.
Chainring Compatibility
So, at some point, I'm going to have to replace my chainrings. My crank is a 5500-series 105 crank. I'm wondering, are the 5700 series chainrings any different? Putting photos of the two side-by-side, they look identical. Are they? Or is there a subtle difference that I'm missing?
01-26-12 | 05:42 PM
#2
Senior Member
Joined: Apr 2009
Posts: 39,897
Likes: 3,865
From: New Rochelle, NY
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
They may or may not be 100% identical, but they are certainly 100% compatible.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
Thread
Thread Starter
Forum
Replies
Last Post
Phantoj
Bicycle Mechanics
1
05-03-10 11:50 AM
