Bottom Bracket Compatability
#1
Senior Member
Thread Starter
Join Date: May 2011
Location: Geelong, Australia
Posts: 659
Bikes: Cannondale Supersix Hi-Mod / Scott Spark 930 / Scott Sportster 20 / Jamis Allegro 2.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Bottom Bracket Compatability
Ola.
I just got a new FS MTB and it came with BB92 and SRAM S-1000 GXP cranks.
I want to swap the cranks for XT (BB30).
What do I need to do (or be aware of) to do this?
Ta.
I just got a new FS MTB and it came with BB92 and SRAM S-1000 GXP cranks.
I want to swap the cranks for XT (BB30).
What do I need to do (or be aware of) to do this?
Ta.
#2
Senior Member
Thread Starter
Join Date: May 2011
Location: Geelong, Australia
Posts: 659
Bikes: Cannondale Supersix Hi-Mod / Scott Spark 930 / Scott Sportster 20 / Jamis Allegro 2.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Must be a hard question...
#3
Mechanic/Tourist
I have no experienc at all with this, but Google does: "bb92 to bb30". First two links have discussion of both possibility and practicality.
#4
Senior Member
Thread Starter
Join Date: May 2011
Location: Geelong, Australia
Posts: 659
Bikes: Cannondale Supersix Hi-Mod / Scott Spark 930 / Scott Sportster 20 / Jamis Allegro 2.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Ta. I did see those two discussions but didn't read far enough down...
thm clavicula adapter BB92 to BB30 appears to be the answer.
thm clavicula adapter BB92 to BB30 appears to be the answer.
#5
Senior Member
Thread Starter
Join Date: May 2011
Location: Geelong, Australia
Posts: 659
Bikes: Cannondale Supersix Hi-Mod / Scott Spark 930 / Scott Sportster 20 / Jamis Allegro 2.0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Actually - it seems Shimano now make their own BB for BB92 frames...
https://www.competitivecyclist.com/pr...0061.19.1.html
It says this BB fits BB92 frames and allows for hollowtech cranks.
Just an FYI for those searching in future.
https://www.competitivecyclist.com/pr...0061.19.1.html
It says this BB fits BB92 frames and allows for hollowtech cranks.
Just an FYI for those searching in future.
#7
Senior Member
Join Date: Jul 2005
Posts: 7,487
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Liked 162 Times
in
89 Posts
I know you seem to have this figured out already, but I thought I'd throw a little info into the mix........There's no such thing as a BB30 Shimano XT crankset. Shimano doesn't make cranks with a 30mm diameter spindle, and to truly be a BB30 crankset, the spindle will be 30mm in diameter. If you had a BB30 frame with BB30 bottom bracket bearings, and you wanted to use a Shimano Hollowtech II crankset, such as current XT, you would need to use adapters to shim the Shimano 24mm crank spindle into the BB30 bearings (the adapters work great, btw).
BB92 is another story, it's a system that's intended for cranks with 24mm spindles, so the XT crankset with the Shimano bearings you intend to use should be no problem.
BB92 is another story, it's a system that's intended for cranks with 24mm spindles, so the XT crankset with the Shimano bearings you intend to use should be no problem.
Thread
Thread Starter
Forum
Replies
Last Post
Erik_A
Cyclocross and Gravelbiking (Recreational)
5
06-30-12 06:12 PM