I need to buy a new chain
#1
Newbie
Thread Starter
Join Date: Apr 2014
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I need to buy a new chain
I want to buy a chain on ebay but there are so many to choose from and I'm afraid I will buy the wrong thing. I have an 18 speed schwinn and the tire is 26 inch. What chain do I buy?
#2
Licensed Bike Geek
18 speed? Does that mean 2 in the front and 9 in the rear or 3 in front and 6 in the rear?
#3
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
Now-a-days, we usually refer to the number of speeds based on the number of cogs on the rear wheel. Current bikes are anywhere from 8 - 11, while back in the old days there were only 5 on the back. The more cogs in back, the tighter the spacing between the cogs. So you need a chain to match that spacing. 9 cogs, you need a 9 speed chain. 10 cogs, a 10 speed chain. If you have 6 or 7, I think the chains are interchangeable (not sure). Count how many cogs you have.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
#4
Senior Member
Shimano, SRAM, or KMC chains are probably the most common. Personally I prefer the SRAM and KMC mainly because they come with special links.
Something like KMC 8x93, SRAM 830, or Shimano HG40 or HG50 will work
Before you start this project though - you need to get a chain tool so you can remove the excess links.
Last edited by jsdavis; 04-05-14 at 08:01 PM.
#5
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,725
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5791 Post(s)
Liked 2,581 Times
in
1,431 Posts
As others said, count the number of sprockets in the back and buy a chain for that many speeds.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#6
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
I'd strongly suggest that you get a chain which has a "quick link" for joining; KMC, SRAM and Wippermann offer them. The Shimano "special joining pin" concept is flawed, IMO. Pick up a couple of spare links for repairs and the like. You will still need a chain tool to cut the new chain to length.
Thread
Thread Starter
Forum
Replies
Last Post
Blightybiker
Classic & Vintage
32
08-31-19 07:27 PM