What can you tell me about Rino hubs?
#1
Senior member
Thread Starter
Join Date: Oct 2004
Location: Oakville Ontario
Posts: 8,117
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 943 Post(s)
Liked 658 Times
in
371 Posts
What can you tell me about Rino hubs?
I picked up a cheap used tubular wheelset to use for pre stretching tubulars. Wasn't too concerned about condition, which is a good thing, because both rims have a terminal warp, but they work fine for the intended purpose.
Anyway, looking at these hubs, they look pretty decent. I have not opened them to look at the internals, but they spin nice and smooth.
A search turned up a bit of discussion, but not too much that was definitive.
Anyway, looking at these hubs, they look pretty decent. I have not opened them to look at the internals, but they spin nice and smooth.
A search turned up a bit of discussion, but not too much that was definitive.
#2
Senior Member
I had these exact hubs. The cones and races must be made of pot metal, because despite proper adjustment and adequate lubrication, they lasted less than a year.
the Rino brakes and levers were horrid, even by the low standards of the era. About the only decent part of the gruppo was the rear derailleur, which seemed to be a clone of the Suntour Cyclone. But since this slant parallelogram unit pre-dated the expiry of the Suntour patent (1984), I cannot figure out how Rino got around this.
the Rino brakes and levers were horrid, even by the low standards of the era. About the only decent part of the gruppo was the rear derailleur, which seemed to be a clone of the Suntour Cyclone. But since this slant parallelogram unit pre-dated the expiry of the Suntour patent (1984), I cannot figure out how Rino got around this.
#3
Senior member
Thread Starter
Join Date: Oct 2004
Location: Oakville Ontario
Posts: 8,117
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 943 Post(s)
Liked 658 Times
in
371 Posts
I had these exact hubs. The cones and races must be made of pot metal, because despite proper adjustment and adequate lubrication, they lasted less than a year.
the Rino brakes and levers were horrid, even by the low standards of the era. About the only decent part of the gruppo was the rear derailleur, which seemed to be a clone of the Suntour Cyclone. But since this slant parallelogram unit pre-dated the expiry of the Suntour patent (1984), I cannot figure out how Rino got around this.
the Rino brakes and levers were horrid, even by the low standards of the era. About the only decent part of the gruppo was the rear derailleur, which seemed to be a clone of the Suntour Cyclone. But since this slant parallelogram unit pre-dated the expiry of the Suntour patent (1984), I cannot figure out how Rino got around this.
#4
Senior Member
Join Date: Nov 2015
Posts: 4,486
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 1639 Post(s)
Likes: 0
Liked 829 Times
in
538 Posts
Rino cranksets seem to look quite decent.... color (green, black red...) highlight anodizing on rings and IIRC, drillium too....
Not sure, but maybe they are similar to Ofmega. Some really nice things but some not so nice (Am I being too kind?) stuff too.....
Maybe the Rino hubs are similar to Ofmegas too....
Not sure, but maybe they are similar to Ofmega. Some really nice things but some not so nice (Am I being too kind?) stuff too.....
Maybe the Rino hubs are similar to Ofmegas too....
#5
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,786
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3588 Post(s)
Liked 3,400 Times
in
1,934 Posts
I haven't used their hubs, but Dave's experience is similar to what I've had with Ofmega hubs. I found that Campagnolo cones were a drop-in replacement for the Ofmega cones; perhaps is may be true for Rino as well. I replaced the Ofmega cones with Campagnolo on my wife's wheels and they're still going strong 30+ years later.
#6
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,470 Times
in
1,435 Posts
I have a pair of Miche Competition hubs that look identical to these, which makes sense, given what @JohnDThompson says. They lasted many years but gave out recently. I replaced the rear axle and cones. One thing I like about them is the shell. The dimensions are similar to Campagnolo Record, including the tight spoke holes. Tight spoke holes are good.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.