Handlebars?
10-09-19 | 07:16 PM
#27
Thread Starter
Senior Member
Joined: Sep 2019
Posts: 232
Likes: 25
From: Grand Rapids, Mi
Bikes: Fuji Tahoe, Schwinn Sierra
I had an upload issue but tried again and it worked.
10-09-19 | 07:17 PM
#28
Senior Member
Joined: Mar 2015
Posts: 1,106
Likes: 518
From: New Zealand
Bikes: Gunnar, Concorde, Peugeot 753, Marin, Pete Tansley, Rocky Mtn, Worldrider, Francis Quinlan, Bob Jackson, Winora, Avanti, Klein, Quintana Roo, Shogun, Carlton, Emmelle, Specialized
most moustache bars will work fine with road levers on the bend. many have a drop and so you can mount them upside down and get a rise. you can shim the clamp if it's 25.4 and you want to re-use your stem.
other alt bars like velo orange tourist probably won't work well with road levers but they're a good option. older mtb levers for cantis should have the right pull and work on those, and only be a few dollars.
I'm a fan of high drop bars but if drops are just not actually what you want then don't suffer them
other alt bars like velo orange tourist probably won't work well with road levers but they're a good option. older mtb levers for cantis should have the right pull and work on those, and only be a few dollars.
I'm a fan of high drop bars but if drops are just not actually what you want then don't suffer them
10-09-19 | 07:32 PM
#30
Senior Member
Joined: Mar 2015
Posts: 1,106
Likes: 518
From: New Zealand
Bikes: Gunnar, Concorde, Peugeot 753, Marin, Pete Tansley, Rocky Mtn, Worldrider, Francis Quinlan, Bob Jackson, Winora, Avanti, Klein, Quintana Roo, Shogun, Carlton, Emmelle, Specialized
Those are bullhorns
also if the bullhorns or pursuit bars have a sweep up at the end then you can use your road levers with them fine. I did that for a while (below)
It's cool, but hardly more 'comfortable' than drop bars
also if the bullhorns or pursuit bars have a sweep up at the end then you can use your road levers with them fine. I did that for a while (below)
It's cool, but hardly more 'comfortable' than drop bars
10-09-19 | 07:33 PM
#31
Senior Member
Joined: Mar 2015
Posts: 1,106
Likes: 518
From: New Zealand
Bikes: Gunnar, Concorde, Peugeot 753, Marin, Pete Tansley, Rocky Mtn, Worldrider, Francis Quinlan, Bob Jackson, Winora, Avanti, Klein, Quintana Roo, Shogun, Carlton, Emmelle, Specialized
VO Tourist.
10-09-19 | 07:33 PM
#32
Thread Starter
Senior Member
Joined: Sep 2019
Posts: 232
Likes: 25
From: Grand Rapids, Mi
Bikes: Fuji Tahoe, Schwinn Sierra
10-09-19 | 07:35 PM
#33
Senior Member
Joined: Apr 2017
Posts: 2,248
Likes: 845
From: Los Angeles, CA
Bikes: 1964 Legnano Roma Olympiade, 1973 Raleigh Super Course, 1978 Raleigh Super Course, 1978 Peugeot PR10, 2002 Specialized Allez, 2007 Specialized Roubaix, 2013 Culprit Croz Blade
+1 on the Nitto Technohomic stem. I wish I was pushing 60, instead of being the wrong side of 70. I have ridden this Legnano since new in '64. Back in the day there was more bike and less me. I hated to swap out the old original Ambrosio stem, but the Nitto provided a better "old man" reach, looks good, and they offer several fit options. I also used a Ritchie adjustable stem while recovering from a broken arm. It's another alternative to finding a fit that suits you, then you can decide on a proper stem option. Good luck with your situation.
This is not a Ritchie, but similar deal:
https://www.amazon.com/FOMTOR-Adjustable-Degree-Handlebar-Mountain/dp/B07QRPVKKL/ref=pd_day0_hl_468_2/130-1401786-6054505?_encoding=UTF8&pd_rd_i=B07QRPVKKL&pd_rd_r=9b48b7c7-08db-4c16-88a0-f21717bb51f9&pd_rd_w=GYQzm&pd_rd_wg=xxDzR&pf_rd_p=0501877d-5f8c-4ec8-9861-e0476eecc53e&pf_rd_r=JFC8BJH43735REM6686M&refRID=JFC8BJH43735REM6686M
The Nitto has gotten me thru two Eroica rides.
This is not a Ritchie, but similar deal:
https://www.amazon.com/FOMTOR-Adjustable-Degree-Handlebar-Mountain/dp/B07QRPVKKL/ref=pd_day0_hl_468_2/130-1401786-6054505?_encoding=UTF8&pd_rd_i=B07QRPVKKL&pd_rd_r=9b48b7c7-08db-4c16-88a0-f21717bb51f9&pd_rd_w=GYQzm&pd_rd_wg=xxDzR&pf_rd_p=0501877d-5f8c-4ec8-9861-e0476eecc53e&pf_rd_r=JFC8BJH43735REM6686M&refRID=JFC8BJH43735REM6686M
The Nitto has gotten me thru two Eroica rides.
Last edited by Slightspeed; 10-09-19 at 08:03 PM.
10-09-19 | 07:45 PM
#34
Senior Member
Joined: Mar 2015
Posts: 1,106
Likes: 518
From: New Zealand
Bikes: Gunnar, Concorde, Peugeot 753, Marin, Pete Tansley, Rocky Mtn, Worldrider, Francis Quinlan, Bob Jackson, Winora, Avanti, Klein, Quintana Roo, Shogun, Carlton, Emmelle, Specialized
very cool legano
10-09-19 | 07:48 PM
#36
Senior Member
Joined: Feb 2017
Posts: 872
Likes: 601
From: Concord, NC
Bikes: 1984 Bianchi Tipo Corsa, 1985 Cannondale SM600 (24/26)
I didn't notice that when I suggested the Nitto; that's an important point to confirm first.
10-09-19 | 08:02 PM
#37
Senior Member
Joined: Mar 2015
Posts: 1,106
Likes: 518
From: New Zealand
Bikes: Gunnar, Concorde, Peugeot 753, Marin, Pete Tansley, Rocky Mtn, Worldrider, Francis Quinlan, Bob Jackson, Winora, Avanti, Klein, Quintana Roo, Shogun, Carlton, Emmelle, Specialized
10-09-19 | 08:12 PM
#38
Thread Starter
Senior Member
Joined: Sep 2019
Posts: 232
Likes: 25
From: Grand Rapids, Mi
Bikes: Fuji Tahoe, Schwinn Sierra
In the catalog it says alloy handlebar (SR-CTB Alloy) and stem (SR-CLS Alloy)
The M spoken of is identical to the M in a sprocket logo standing for Miyata.
The M spoken of is identical to the M in a sprocket logo standing for Miyata.
10-09-19 | 08:13 PM
#39
Hoards Thumbshifters
Joined: Jul 2010
Posts: 1,211
Likes: 429
From: Signal Mountain, TN
Bikes: '23 Black Mtn MC, '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '91 Trek 750
I went to an 80cm Nitto Technomic with a Nitto noodle bar. Changed everything for me.
Whatever you do trial your new setup without wrapping handlebar tape. You can clear tape the brake housing though. That way you can adjust, test ride, adjust, test ride, swap bars, test ride.
Whatever you do trial your new setup without wrapping handlebar tape. You can clear tape the brake housing though. That way you can adjust, test ride, adjust, test ride, swap bars, test ride.
10-09-19 | 08:15 PM
#40
Senior Member
Joined: Oct 2014
Posts: 14,151
Likes: 5,273
From: Portland, OR
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Ben
10-10-19 | 12:00 AM
#42
Cyclotouriste
Joined: Aug 2009
Posts: 11,784
Likes: 6,994
From: South Holland, NL
Bikes: Yes, please.
Another option:
10-10-19 | 04:13 AM
#43
Hoards Thumbshifters
Joined: Jul 2010
Posts: 1,211
Likes: 429
From: Signal Mountain, TN
Bikes: '23 Black Mtn MC, '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '91 Trek 750
I went to an 80cm Nitto Technomic with a Nitto noodle bar. Changed everything for me.
Whatever you do trial your new setup without wrapping handlebar tape. You can clear tape the brake housing though. That way you can adjust, test ride, adjust, test ride, swap bars, test ride.
Whatever you do trial your new setup without wrapping handlebar tape. You can clear tape the brake housing though. That way you can adjust, test ride, adjust, test ride, swap bars, test ride.
My setup
10-10-19 | 05:18 AM
#44
Senior Member
Joined: Nov 2005
Posts: 4,035
Likes: 2,116
From: NW Ohio
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-1977 Univega Grand Rally, S LTD, 1973 Sears Free Spirit 531, 197? FW Evans
I have both the Soma Sutro and the Nitto Technomic. The Sutro is about 1 inch taller than a normal stem, the Technomic is about 2 inches taller. Since the head tube is angled, the reach is shorter as the stem gets taller.
10-10-19 | 05:30 AM
#45
Senior Member
Joined: May 2008
Posts: 10,106
Likes: 2,757
From: Fredericksburg, Va
Bikes: ? Proteous, '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, 'Litespeed Catalyst'94 Burley Duet, 97 Specialized RockHopper, 2010 Langster
OK I will take a different approach. I think you frame is too small! I am pushing 70 and think I am the exception, but my bars are 2" lower than my saddle. I find that doing sit ups and abdominal exercise helps with the back issues. Strengthen that core and you will do better.
This is my main ride which I enjoy the most. Note that the stand kicks up the back a bit.
P1010551, on Flickr
This is my main ride which I enjoy the most. Note that the stand kicks up the back a bit.
P1010551, on Flickr
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
10-10-19 | 06:33 AM
#46
I am the DJ
Joined: Mar 2014
Posts: 1,995
Likes: 2,593
From: North Carolina
Bikes: yes please
I've used these Cromo quill extenders with good results. Being very tall and not always finding the bike I want in a frame as large as I need these raise the stem up to 8½ inches. That wording "up to" leads me to believe it can be cut down if 8½" is too much. I think they were about $15 each.
Last edited by Deal4Fuji; 10-10-19 at 06:53 AM.
10-10-19 | 07:16 AM
#47
Thread Starter
Senior Member
Joined: Sep 2019
Posts: 232
Likes: 25
From: Grand Rapids, Mi
Bikes: Fuji Tahoe, Schwinn Sierra
What are these called? With the taller stem I may become cramped but with these I could still stretch out and not be so low. Especially with regards to to brakes. As they are currently awkward to access.
Last edited by roadbikeChris; 10-10-19 at 10:21 AM.
10-10-19 | 10:45 AM
#48
Thread Starter
Senior Member
Joined: Sep 2019
Posts: 232
Likes: 25
From: Grand Rapids, Mi
Bikes: Fuji Tahoe, Schwinn Sierra
In theory would something like this work with shims?
https://www.ebay.com/itm/Bike-Handlebar-Cycling-Bicycle-Aluminum-Alloy-Sports-Parts-Replacement/303290728205?hash=item469d893f0d%3Am%3AmpoT1YIzrYnZI9nxmZIArag&LH_BIN=1
For reference only what size bars do I need?
https://www.ebay.com/itm/Bike-Handlebar-Cycling-Bicycle-Aluminum-Alloy-Sports-Parts-Replacement/303290728205?hash=item469d893f0d%3Am%3AmpoT1YIzrYnZI9nxmZIArag&LH_BIN=1
For reference only what size bars do I need?
10-10-19 | 11:15 AM
#49
Senior Member
Joined: Jul 2006
Posts: 11,474
Likes: 4,879
From: San Jose (Willow Glen) Ca
Bikes: Kirk Custom JK Special, 86 De Rosa Pro, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
try tilting the handle bars up a little bit. a bit first.... i know classic is drops parallel to the ground but simple no cost to try first is tilting the bars up a bit....made a difference for me in more than one case YMMV
OK, there's no way I can ride with the current configuration. I am pushing 60 and need to be more upright. Looking for suggestions...I want to keep the current brake levers to save cost. Just not sure what to do or what is best.
__________________
Life is too short not to ride the best bike you have, as much as you can.
Life is too short not to ride the best bike you have, as much as you can.