Show me your road bike conversion with more upright riser stem
#26
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,885
Bikes: Too many to list here check my signature.
Mentioned: 194 Post(s)
Tagged: 2 Thread(s)
Quoted: 2943 Post(s)
Liked 2,950 Times
in
1,504 Posts
Great looking bike, I like that extended head tube. When I lived in Boston area one of the guys I rode with had a Spectrum with an extended HT I always thought it was a great idea.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For Bianchigirll:
#27
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,113
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 269 Post(s)
Tagged: 0 Thread(s)
Quoted: 4527 Post(s)
Liked 6,422 Times
in
3,697 Posts
HT and long steerer all part of Dave's genius and plan, the HS spacer was a bit of a challenge that I managed to wrangle and pressing the cups required pulling a roll pin to get enough length.
Chrome quill stem, oldschool Campy HS and shiny spacer all part of the aesthetics I wanted that came together very well IMO, again thanks to Dave and his expertise. He questioned plenty of this and worked through it all, explaining and considering all my wants and concerns.
Frame is a bit smaller than it would have been so it can all shrink with me down the road.
I was very concerned when we went there as I wanted it to be plenty big having fully realized I had been riding too small frames for a long time.
All part of Dave's grand design, works, rides and is fantastic, worth every damn cent of which there were many.
Last edited by merziac; 12-18-22 at 03:00 PM.
#28
Junior Member
I was thinking long term when Steve Rex built this for me. Not long after this picture I flipped the stem to horizontal, but the option is there when/if I need it
#29
Full Member
You`ll probably think this it too extreme, but it works.
Very long stem, short reach, and I actually have it backwards to bring the bars closer. Nice and high, short reach.
'
'
''
Very long stem, short reach, and I actually have it backwards to bring the bars closer. Nice and high, short reach.
'
'
''
Likes For roadsnakes:
#32
Cantilever believer
Join Date: Nov 2021
Location: Phoenix, AZ
Posts: 1,620
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 554 Post(s)
Liked 1,911 Times
in
860 Posts
I met Wrong Way Wooten once...
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
#33
Senior Member
Thread Starter
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,502
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 584 Post(s)
Liked 704 Times
in
397 Posts
@roadsnakes, that bike is crying out for stem or headset mounted shifters too. I’m doing the grand slam on my current build; stem shifters, dirt drop stem, dork disk, and turkey levers. Sorry to offend.
#34
Cantilever believer
Join Date: Nov 2021
Location: Phoenix, AZ
Posts: 1,620
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 554 Post(s)
Liked 1,911 Times
in
860 Posts
@roadsnakes, that bike is crying out for stem or headset mounted shifters too. I’m doing the grand slam on my current build; stem shifters, dirt drop stem, dork disk, and turkey levers. Sorry to offend.
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
#35
Full Member
My mid-90’s Serotta. Technomic puts the bars in my comfort zone.
#36
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,196
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1566 Post(s)
Liked 1,299 Times
in
867 Posts
I've owned literally hundreds of road-going bikes but had yet to ever fit a riser stem despite my relatively long leg length proportions.
Trek has offered racing frame models in both H1- and H2-fit configurations, the latter offering a longer head tube.
I had the chance a few years back to buy one of the very rare "Koppenberg" frames (these were sold only as frame-only) in my preferred 56cm size (smallest size offered as these were homologation-rules production).
The deal was good, fully equipped with top-end gear but with no wheelset, for $1500, formerly pro-owned and all that.
But when I went to ride this bike with it's "H1-fit" headtube and minimalist-cut steer tube, I had to think outside of my comfort zone and consider my options.
So, after first trying everything I had on many rides, I ordered a Deda 115mm stem off Ebay from Canada having a six-degree rise or drop, new for only $15.
So it looks like it's now +6-degrees for me, first go with a riser stem.
I happened to find a deal on closeout 55mm rim-brake wheels last week for only $299/pr, so tested those on Tuesday and Wednesday and even stopped to take photos of this extreme (for me) bike on my way back into town.
Sorry that these photos got sent via email from my Iphone to my PC to my Flickr account, not showing great resolution at this point!
But I really wanted this special bike to fit, and the riser stem allows just that!
Trek has offered racing frame models in both H1- and H2-fit configurations, the latter offering a longer head tube.
I had the chance a few years back to buy one of the very rare "Koppenberg" frames (these were sold only as frame-only) in my preferred 56cm size (smallest size offered as these were homologation-rules production).
The deal was good, fully equipped with top-end gear but with no wheelset, for $1500, formerly pro-owned and all that.
But when I went to ride this bike with it's "H1-fit" headtube and minimalist-cut steer tube, I had to think outside of my comfort zone and consider my options.
So, after first trying everything I had on many rides, I ordered a Deda 115mm stem off Ebay from Canada having a six-degree rise or drop, new for only $15.
So it looks like it's now +6-degrees for me, first go with a riser stem.
I happened to find a deal on closeout 55mm rim-brake wheels last week for only $299/pr, so tested those on Tuesday and Wednesday and even stopped to take photos of this extreme (for me) bike on my way back into town.
Sorry that these photos got sent via email from my Iphone to my PC to my Flickr account, not showing great resolution at this point!
But I really wanted this special bike to fit, and the riser stem allows just that!
Likes For tendency:
#38
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,528
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2751 Post(s)
Liked 3,408 Times
in
2,063 Posts
#39
Full Member
Likes For roadsnakes:
#40
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,716
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1957 Post(s)
Liked 2,030 Times
in
1,119 Posts
#41
Not so New
Likes For John D:
#42
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,001
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1957 Post(s)
Liked 3,664 Times
in
1,682 Posts
Night ride to band practice with a truely high rise. Next step would be ape hangers.
#43
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,515
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 1,650 Times
in
1,060 Posts
I do find that Seat and Bar Height are very critical. Each year I find myself raising my bars a few millimeters and lowering my seat just a hair. Here the seat is about as high as I ever get it. I prefer for my seat to be level with the bars but sometimes I just can't handle it...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
Last edited by zandoval; 12-23-22 at 11:48 AM.
Likes For zandoval:
#44
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,751
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3235 Post(s)
Liked 3,882 Times
in
1,442 Posts
I user riser stems with threadless steerers. I think it looks a lot better than a big stack of spacers.
I used to have a Long Haul Trucker with a big stack of spacers and a riser stem. For a touring bike, though, looks aren't even close to as important as comfort.
For threaded steerers with quill stems, I think it depends on the height. I'm still getting by with my bars around the same height as my saddle, and I think this looks OK.
There's definitely a point where a standard '7' quill doesn't look as good as a riser. I think I passed that point with this one.
I ultimately accepted that that bike was too small for me, but the same thing will happen when I start needing the bars much higher than the saddle.
I used to have a Long Haul Trucker with a big stack of spacers and a riser stem. For a touring bike, though, looks aren't even close to as important as comfort.
For threaded steerers with quill stems, I think it depends on the height. I'm still getting by with my bars around the same height as my saddle, and I think this looks OK.
There's definitely a point where a standard '7' quill doesn't look as good as a riser. I think I passed that point with this one.
I ultimately accepted that that bike was too small for me, but the same thing will happen when I start needing the bars much higher than the saddle.
__________________
My Bikes
My Bikes
Likes For Andy_K:
#45
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,001
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1957 Post(s)
Liked 3,664 Times
in
1,682 Posts
I user riser stems with threadless steerers. I think it looks a lot better than a big stack of spacers.
I used to have a Long Haul Trucker with a big stack of spacers and a riser stem. For a touring bike, though, looks aren't even close to as important as comfort.
For threaded steerers with quill stems, I think it depends on the height. I'm still getting by with my bars around the same height as my saddle, and I think this looks OK.
There's definitely a point where a standard '7' quill doesn't look as good as a riser. I think I passed that point with this one.
I ultimately accepted that that bike was too small for me, but the same thing will happen when I start needing the bars much higher than the saddle.
I used to have a Long Haul Trucker with a big stack of spacers and a riser stem. For a touring bike, though, looks aren't even close to as important as comfort.
For threaded steerers with quill stems, I think it depends on the height. I'm still getting by with my bars around the same height as my saddle, and I think this looks OK.
There's definitely a point where a standard '7' quill doesn't look as good as a riser. I think I passed that point with this one.
I ultimately accepted that that bike was too small for me, but the same thing will happen when I start needing the bars much higher than the saddle.
#46
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,751
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3235 Post(s)
Liked 3,882 Times
in
1,442 Posts
__________________
My Bikes
My Bikes
#47
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,122
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 854 Post(s)
Liked 1,445 Times
in
822 Posts
Once again, I have been making changes to contact point on my bikes due to age and chronic spine and shoulder issues. This is the latest set up for my Lemon Poprad. The stem is 120 mm length with +10 degree, can't actually see it with the handlebar bag. The bar ends are 8 speed, set on friction, with 11-34 in back and 48/34 front.
Think I am going to remove the rear rack and put a small front rack back on the bike. I have QR Ortlieb saddle bags, 3 sizes, I can easily switch depending on the ride. I very much like bar end levers with the V-O Porteur bar.
Think I am going to remove the rear rack and put a small front rack back on the bike. I have QR Ortlieb saddle bags, 3 sizes, I can easily switch depending on the ride. I very much like bar end levers with the V-O Porteur bar.