Also sent a PM. ;)

Maybe a stronger bolt?
PM also sent

And just arrived today. Thanks again!

I picked up some Shimano SH24 cleats with a tri-color shoe purchase - in used but looks like still usable condition.
Not 100% sure which pedals these go with - possibly the Look-licensed early clipless ones? Velobase doesn't say. I guess if you need them you'd know.

Anyway, PM me if you feel like risking about $2 CONUS (guessing?) to pay for the cost of postage and a padded envelope.

Edit: spoken for and out the door

I pulled this out of the Box o' Crap, but turns out I didn't have the right replacement cage after all. If you do, or need it for other bits, hmu! It's a 7400.

https://farm5.staticflickr.com/4798/...d407d3b6_c.jpg

Ex-pres, I'll risk $2, sending PM

I have a pair of CyclePro toe clips, size M for the cost of small box postage. They have been in an Evaporust bath and are rider quality. PM me if interested.

44 or more
 

If those are 44cm or larger I am definitely interested perfect for my wife.

Weinmann Type 500 side pull brakes
 

https://cimg2.ibsrv.net/gimg/bikefor...96b4934376.jpg
I have a pair of Weinmann 500 side pulls that I will not be able to use. I do not have the half-round washers, cable adjusters, or the QR levers for them. They are quite functional, so with a little polishing they will be fine brakes. Yours for the cost of postage. See photo.

118 BCD chainring for old SR or Ofmega crank
 

Hi folks,

I recently picked up a decent 52 tooth chainring at our local co-op thinking it was a Stronglight 122 BCD. When I tried to mount it, I found that it is actually one of those odd 118 BCD chainrings that were used on early SR and Ofmega cranks. It's available for the cost of postage. If you'd like a picture, PM me your e-mail address.

Regards,

Van

Easton EA70 wheels, bars, helmet.

https://cimg3.ibsrv.net/gimg/bikefor...0b885899e4.jpg
https://cimg4.ibsrv.net/gimg/bikefor...85a01bf592.jpg
https://cimg5.ibsrv.net/gimg/bikefor...d617b739f1.jpg
https://cimg8.ibsrv.net/gimg/bikefor...cfe403958f.jpg
https://cimg7.ibsrv.net/gimg/bikefor...221037f41c.jpg


The wheels are about 10 years old and apparently they were part of a batch of EA70s that were built with some sub-standard spokes. I've popped about four spokes on the rear wheel, the last time two spokes went at the same time. You could replace the two broken spokes and they'd probably be fine (especially if you weight less than I do - 210#), or you could re-spoke them.

Three bars - a 44 cm 3T Rotundo with a stem (120mm, I think), a 42 mm Modolo and a 44 cm Deda Newton. They've got some old bar tape glue on them but they're in pretty good shape otherwise. All aluminum. Oh, and a pair of those trekking butterfly bars, too.

Large Bell helmet, worn on one ride, turns out my head and the helmet aren't the same shape.

I'm in the Salt Lake City area. Send a text to 8 oh one 5 seven 3 zero zero 44.

Sending PM on wheels and the mustache bars!!

Sent PM on bars & stem

Shouldn't this be PIF 2018?

Not sure if this thread is dead or not (if so, apologies for bringing it back up). That said - if it isn't, I have this NOS (but not perfect) Raleigh Space Rider chainguard in a crazy, factory lime green. Got it in a lot at least 10 years ago and it's sat around ever since. Cover shipping and it is yours. Don't have the heart to scrap it.

https://cimg0.ibsrv.net/gimg/bikefor...a495c39449.jpg
https://cimg1.ibsrv.net/gimg/bikefor...0d5d6eae66.jpg
-Kurt

Time to bump this thread for 2019!

Anyone want a Centurion Owner's Manual, ca 1990? Free for the cost of postage.

I have two copies of this compendium of head badges. I only need one, so I will pass this one along.

I ask only that you pay the postage which will be $3.27 via media mail anywhere in the US. If you are in another country I will be glad to send it to you for whatever it costs me to send it to you.
Brent

https://photos.smugmug.com/Other/Roc..._DSC1960-L.jpg

https://photos.smugmug.com/Other/Roc..._DSC1961-L.jpg

That was quick!
The head badge book is gone.
Brent

PM sent. Thanks, Brent!

I've got this Nashbar/Maruishi 58cm frame/ Fork made with Ishiwata tubing. Sorry, local pick-up only in the Bay Area.
https://farm5.staticflickr.com/4808/...cc7ffe30_b.jpg
IMG_6828 by 2cam16, on Flickr
https://farm5.staticflickr.com/4827/...8dc9ca2d_b.jpg
IMG_6829 by 2cam16, on Flickr
https://farm8.staticflickr.com/7867/...cb7dddc1_b.jpg
IMG_6831 by 2cam16, on Flickr
https://farm8.staticflickr.com/7922/...688b1a74_b.jpg
IMG_6832 by 2cam16, on Flickr
https://farm8.staticflickr.com/7819/...2308264c_b.jpg
IMG_6833 by 2cam16, on Flickr
https://farm8.staticflickr.com/7821/...cf3310d0_b.jpg
IMG_6834 by 2cam16, on Flickr
https://farm8.staticflickr.com/7825/...a7822908_b.jpg
IMG_6835 by 2cam16, on Flickr

20-year-old (at least) Salsa jersey. Nice condition. Size medium. Free to a good home. Just pay me for the postage, $5.65 first class mail within the U.S. I'm willing to mail out of the U.S. but the postage will be higher.
Brent

https://photos.smugmug.com/Other/Roc...MG_0042-XL.jpg

No way I'd ever fit a medium, but that's a really cool looking jersey! Thx for giving it to the community!

3 MTB books.
The hardcover Stumpjumper book is a factory promo piece but amusing nonetheless. Nice for someone who has a Stumpjumper perhaps.
The "Mountain Bike Guide" is probably only of interest to someone near San Diego. Some of it is, no doubt, out of date since it's publication date is 1993.
The "Mountain Bike!" book is from 1992 and full of amusing black and white illustrations in the style of the one on the cover.

Just pay me the postage; $3.27 for each.
Brent

https://photos.smugmug.com/Other/Roc...MG_0045-XL.jpg