|
If you still have these things, I am interested in them. USPS flat rate box might work... sending a PM your way.
Originally Posted by Mad Honk
(Post 23502020)
Today's offering is a Shimano hub model 2200 over lock nut is 130mm and the freehub had a seven speed cassette with this spacer behind it so I'm thinking it is 8spd. Cost of shipping thru pirate ship. Smiles, MH
https://cimg7.ibsrv.net/gimg/bikefor...1b7b98df2d.jpg Nothing special 32 hole hub. It could used an overhaul before being laced into a wheel.
Originally Posted by Mad Honk
(Post 23541286)
For the folks who have checked out the JBB thread, you know I picked up a "carpet fibre" bike that could not be saved. But a bunch of parts from that bike are going to leave here destined for some BF member who is willing to pay the modest shipping costs from USPS. The whole lot of this should fit a box about 6 inches square. PM me. Smiles, MH
https://cimg6.ibsrv.net/gimg/bikefor...64f2c028b2.jpg These things are useable. Stem, HS, brakes (a bent post on the rear but otherwise ok), F&R derailleurs and the adjuster bits for cables. |
Travis,
Both of those items have left the shop. But stay tune as there is always new stuff showing up here. Smiles, MH |
Three later SunTour freewheels, one AP, two Alpha, all 13-24, two 7sp, one 6sp. Two of them spin kind of noisily, one seems okay. Good for spare parts or refurbishing I suppose. All three will fit in a USPS small flat rate box. Yours for postage.
https://cimg8.ibsrv.net/gimg/bikefor...e22e51e7af.jpg https://cimg9.ibsrv.net/gimg/bikefor...96a4c527bc.jpg https://cimg0.ibsrv.net/gimg/bikefor...55ec7b171e.jpg |
I'll give them a whirl. Sending you a PM. Thanks.
|
Last chance, loosing storage space. Please save it from an ignoble fate. 1983 Miyata 912. Seeks new home. Free for cost of shipping.
https://www.bikeforums.net/classic-v...rame-fork.html F/f is taken. Hooray. It should have a good life again. |
|
Claimed by Legarto79
5 hubs, all spin freely but have not been opened or repacked with grease recently +IL front silver 36 hole +Quando front silver 36 hole +2 Unknown front silver 36 hole +Unknown rear freewheel black 36 hole https://cimg2.ibsrv.net/gimg/bikefor...663e4d2911.jpg https://cimg3.ibsrv.net/gimg/bikefor...a57a695a56.jpg |
Cleaning out my apron pocket, and I found a pair of these:
https://cimg9.ibsrv.net/gimg/bikefor...d974a00a55.jpg barrel adjusters for brake levers I don't remember which levers these fit; maybe some older model Mafac? In any case they need to be with someone who has need for them. Nothing here in the shop that they will fit. They are brass with threads on the interior of the smooth side and the cable stop on the knurled end. PM me Smiles. MH |
|
I agree, MAFAC.
|
*****************Claimed.
After listing these Santé bits a while I have to accept that there is zero interest for these kinds of item on ebay, and I'd like for someone to appreciate them. Let me know if you are interested in anything along with your ZIP code and I will get you an estimate for shipping. Also, if you take anything you have to promise not to tell my wife because I told her that selling these on ebay would pay for the frame that these came off of :thumb:. Grubby hoods but in fair condition: https://cimg2.ibsrv.net/gimg/bikefor...7d8edcaf7e.jpg https://cimg3.ibsrv.net/gimg/bikefor...7029262235.jpg https://cimg4.ibsrv.net/gimg/bikefor...da4dcffbaf.jpg https://cimg6.ibsrv.net/gimg/bikefor...c88a2c509e.jpg A word about these calipers: the rear is missing the adjuster and is horribly corroded on the backside: https://cimg7.ibsrv.net/gimg/bikefor...7c7dcff0ba.jpg https://cimg8.ibsrv.net/gimg/bikefor...9f054d466f.jpg https://cimg9.ibsrv.net/gimg/bikefor...2d42263b05.jpg This crankset is in good shape and if it the BCD was 110 it would be already installed on one of my bikes because it is a pretty part (I do have the chrome dust covers, I found them after I took photos): https://cimg0.ibsrv.net/gimg/bikefor...be23af163c.jpg https://cimg1.ibsrv.net/gimg/bikefor...4515c792a1.jpg |
*****************Claimed.
More... Clamp is 28.6mm and it worked fine before I stripped the frame: https://cimg7.ibsrv.net/gimg/bikefor...07dddd766e.jpg Worked fine before I stripped the frame: https://cimg1.ibsrv.net/gimg/bikefor...66e840f123.jpg https://cimg4.ibsrv.net/gimg/bikefor...9ef6792f64.jpg Races are polished but not damaged in any way: https://cimg5.ibsrv.net/gimg/bikefor...209686ba04.jpg Genuine Santé headset in fair condition; the crown race is still on the fork which I have yet to locate, but it's in the garage somewhere. Races are polished but not damaged: https://cimg6.ibsrv.net/gimg/bikefor...110e6782c4.jpg https://cimg7.ibsrv.net/gimg/bikefor...61c3061d5e.jpg https://cimg8.ibsrv.net/gimg/bikefor...7cb42726a5.jpg |
That is unbelievably generous of you. Hopefully someone pays at least an appreciation for that generosity.
It would look cool on a blue and white 53cm Nishiki Tri-A which I have but it will be finding a new home (too small). |
That's a great giveaway! very generous of you, Jolly
|
Or maybe a blue and white Basso Loto, but what will I do with the NR group that is on there?
the last Sante' I had went to Wes Barnes in Canada on the red bike that took a covid year to cross the border. Smiles, MH |
For free???? !!!!.......I am surprised that no one has offered to pay for shipping as well as adding a bit extra for this group......If I were in the buying mode (which I am not) I would have made an offer already.
Maybe were waiting for jolly to also pay for shipping and installation..........:innocent: Best, Ben |
Sounds like a great offer, but I've never even heard of Sante' before.
|
Dang! I missed out on the Sante groupset. That would have looked great on my blue Rossin with white lettering which is in need of a groupset. I better pay more attention!
|
Originally Posted by Mad Honk
(Post 23557123)
More stuff out of the tool box A handful of dial indicators. I thought at one time they would help wit wheel building, but I changed my mind. As always first to pm and cost of shipping. Smiles, MH
https://cimg4.ibsrv.net/gimg/bikefor...d096d16e76.jpg Taking up space in one of the toolboxes. |
Skip,
They are not heavy enuf for an anchor to go Coho Fishing! But I will send them anyway. Smiles, MH |
Today I stopped by the Co-Op to find some city brake levers, no go on the levers but one of the volunteers handed me this rear derailleur, and I don't have a use for it so same as always PM me. Smiles, MH
https://cimg5.ibsrv.net/gimg/bikefor...911eecb3f8.jpg Nuovo Gran Sport. The fella that gave it to me thought it might be some special model, but he is still a younger mechanic. Anyway it should work for a BF member working on a period correct build. |
Originally Posted by Mad Honk
(Post 23557950)
Today I stopped by the Co-Op to find some city brake levers, no go on the levers but one of the volunteers handed me this rear derailleur, and I don't have a use for it so same as always PM me. Smiles, MH
https://cimg5.ibsrv.net/gimg/bikefor...911eecb3f8.jpg Nuovo Gran Sport. The fella that gave it to me thought it might be some special model, but he is still a younger mechanic. Anyway it should work for a BF member working on a period correct build. |
Claimed
https://cimg5.ibsrv.net/gimg/bikefor...46b9f2a8fd.jpg https://cimg8.ibsrv.net/gimg/bikefor...9ad2255acc.jpg https://cimg0.ibsrv.net/gimg/bikefor...8ba6be52fa.jpg https://cimg1.ibsrv.net/gimg/bikefor...f798a246bb.jpg https://cimg3.ibsrv.net/gimg/bikefor...87ae3a6b06.jpg https://cimg4.ibsrv.net/gimg/bikefor...53b6f9b25a.jpg https://cimg5.ibsrv.net/gimg/bikefor...1c897a9dee.jpg https://cimg6.ibsrv.net/gimg/bikefor...4aa998d4b1.jpg https://cimg7.ibsrv.net/gimg/bikefor...9a50e74e54.jpg https://cimg9.ibsrv.net/gimg/bikefor...4a0240ab33.jpg |
Claimed.
https://cimg9.ibsrv.net/gimg/bikefor...26f8201dd0.jpg |
Originally Posted by jolly_codger
(Post 23570397)
Crank dust caps; the Suginos are plastic, the others are metal. They are in "meh" condition but might be what you need to complete that build project. Your pick for USPS mailing cost.
https://cimg9.ibsrv.net/gimg/bikefor...26f8201dd0.jpg |
| All times are GMT -6. The time now is 12:39 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.