ISO and For Trade thread parts 2 and 3.
01-19-10, 02:26 PM
#2776
Senior Member
Join Date: Aug 2008
Posts: 55
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have:
-Peugeot PY10FC (57)
Want:
-Benotto Modolo 5000 (55) or similar Italian steel
-steel frame suitable for rando
-Peugeot PY10FC (57)
Want:
-Benotto Modolo 5000 (55) or similar Italian steel
-steel frame suitable for rando
01-19-10, 03:19 PM
#2777
Gone World Hepster
Join Date: Oct 2005
Location: Lincoln, NE
Posts: 1,211
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 7 Times
in
4 Posts
I need a vintage 1" chrome fork for my 80's Diamant--minimum of 210mm and no extreme rake--the dropouts and fork crown on the one that came with the frame were hopelessly buggered by some moron with a file.
Have lots of stuff and that, the name of which shall not be spoken....
Have lots of stuff and that, the name of which shall not be spoken....
Last edited by 23skidoo; 01-19-10 at 03:40 PM.
01-19-10, 09:47 PM
#2778
Senior Member
Join Date: Jun 2007
Location: Pittsburgh, PA
Posts: 613
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Looking for:
-Suntour Cyclone M-II, Cyclone 7000 or Superbe front derailer, 28.6 clamp
-SR Apex drive side crank arm, 170
-Suntour Superbe rear downtube shifter
-Complete set of Suntour downtube shifters, not picky on model
-Aero brake levers with black hoods, bonus points for Modolo - ACQUIRED
-Tubular tires
-Wald front basket, preferably #139
-Fenders that will accomodate 27x1 1/4 tires
-Shimano A520 pedals
Have:
-Dia Compe white aero brake levers with white hoods
-Sakae triple cranks
-Shimano 600 hub set, 36 hole, Uniglide
-Uniglide 13-26 six-speed cassette
-Suntour Cyclone M-II front derailer, 31.8 clamp
-1971 Triumph 3-speed, complete and original
-Clamp-on aerobars
-Kalloy 25.8 seatpost
-AVA Competition stem, 70mm, 22.0 (French) steerer, 25.2 clamp (should fit either French 25.0 bars or 25.4, I think) - GONE, apparently a hot item tonight!
-Panasonic quill stem, 80mm, 22.2 steerer, 25.4 clamp
-Cyclepro stem, 100mm, 1 1/8" threadless, 25.4 clamp
-Limited monetary resources
-Suntour Cyclone M-II, Cyclone 7000 or Superbe front derailer, 28.6 clamp
-SR Apex drive side crank arm, 170
-Suntour Superbe rear downtube shifter
-Complete set of Suntour downtube shifters, not picky on model
-Aero brake levers with black hoods, bonus points for Modolo - ACQUIRED
-Tubular tires
-Wald front basket, preferably #139
-Fenders that will accomodate 27x1 1/4 tires
-Shimano A520 pedals
Have:
-Dia Compe white aero brake levers with white hoods
-Sakae triple cranks
-Shimano 600 hub set, 36 hole, Uniglide
-Uniglide 13-26 six-speed cassette
-Suntour Cyclone M-II front derailer, 31.8 clamp
-1971 Triumph 3-speed, complete and original
-Clamp-on aerobars
-Kalloy 25.8 seatpost
-AVA Competition stem, 70mm, 22.0 (French) steerer, 25.2 clamp (should fit either French 25.0 bars or 25.4, I think) - GONE, apparently a hot item tonight!
-Panasonic quill stem, 80mm, 22.2 steerer, 25.4 clamp
-Cyclepro stem, 100mm, 1 1/8" threadless, 25.4 clamp
-Limited monetary resources
Last edited by Business810; 01-20-10 at 10:22 AM.
01-20-10, 08:29 AM
#2780
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,735
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2155 Post(s)
Liked 3,405 Times
in
1,206 Posts
Nope, it was a later forged stem. Ugly- and tends to stick in the steer tube- but not death prone.
01-20-10, 03:24 PM
#2781
Senior Member
Does anyone have an 8 or 9 speed Dura Ace group sitting around, or perhaps an 8/9 speed Record or Chorus group? I know, not likely, but I've got to build up this
frame before the weather turns nice!
Thanks!
frame before the weather turns nice!
Thanks!
Last edited by Force; 01-22-10 at 12:23 PM.
01-20-10, 04:57 PM
#2783
Senior Member
Join Date: Dec 2008
Posts: 1,315
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
new condition. this its 8 speed though. trade for a campy super record group
01-20-10, 06:43 PM
#2784
Senior Member
Join Date: Jul 2004
Location: Yukon, Canada
Posts: 8,759
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 113 Post(s)
Likes: 0
Liked 16 Times
in
14 Posts
I'll politely disagree. i had one, nice big cracks formed in it. The way the bolt pinches makes for a scary weak spot.
__________________
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
01-20-10, 07:58 PM
#2785
Junior Member
Join Date: Jan 2010
Location: LA/SD, CA
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Looking for ~$150 road bike (probably asking for too much 
) Preferably Schwinn, Miyata or Trek
(at UCSD in San Diego, CA)
) Preferably Schwinn, Miyata or Trek(at UCSD in San Diego, CA)
01-20-10, 08:51 PM
#2786
Senior Member
Join Date: Dec 2008
Posts: 659
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
How much work are you willing to do?
Any special preferences?
Those three brands are well-known enough to be sought-after and therefore more expensive. Will you accept a Centurion, Univega, Sekine, Raleigh...?
01-21-10, 06:24 AM
#2787
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,735
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2155 Post(s)
Liked 3,405 Times
in
1,206 Posts
I'll politely disagree. i had one, nice big cracks formed in it. The way the bolt pinches makes for a scary weak spot.
01-21-10, 09:08 AM
#2788
Senior Member
ISO.............looking for a source for an alloy coaster brake wheel that will fit 126mm spacing. Preferably 26"x1.5 or greater that is off-road worthy.
01-21-10, 10:14 AM
#2789
Junior Member
Join Date: Jan 2010
Location: LA/SD, CA
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What size are you looking for? I'm around 5'7ish, so around +51cm
How much work are you willing to do? Depends on the condition of the bike, but I'm planning to take it at my local bike shop near home to learn more on dealing with its components
Any special preferences? Black, white or red
Those three brands are well-known enough to be sought-after and therefore more expensive. Will you accept a Centurion, Univega, Sekine, Raleigh...? Yes, those brand just came out of my head when I made the post, but those brands you listed will do
How much work are you willing to do? Depends on the condition of the bike, but I'm planning to take it at my local bike shop near home to learn more on dealing with its components
Any special preferences? Black, white or red
Those three brands are well-known enough to be sought-after and therefore more expensive. Will you accept a Centurion, Univega, Sekine, Raleigh...? Yes, those brand just came out of my head when I made the post, but those brands you listed will do
Last edited by dt.; 01-21-10 at 10:21 AM.
01-21-10, 10:34 AM
#2790
Wherever I may roam....
Join Date: Oct 2009
Location: Topton Pa
Posts: 1,853
Bikes: A few bikes
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
01-21-10, 10:36 AM
#2791
Junior Member
Join Date: Jan 2010
Location: LA/SD, CA
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
01-21-10, 09:08 PM
#2792
Senior Member
Join Date: Oct 2009
Posts: 2,698
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
ISO:
Black Brooks saddle. Or any other nice saddle
Have:
Size 45 (11-12ish) Specialized clipless road shoes. Great condition, LOOK or SPD:
More pics on request.
Black Brooks saddle. Or any other nice saddle
Have:
Size 45 (11-12ish) Specialized clipless road shoes. Great condition, LOOK or SPD:
More pics on request.
01-21-10, 10:04 PM
#2793
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,925
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1492 Post(s)
Liked 1,095 Times
in
641 Posts
Need:
Side-pull, shortish reach (500 - 550mm), pull on right side, non-recessed brake calipers.
Q/R skewers - could use a set - for 100 spacing in front, and 120 or 126 in the rear. make not important. Hoping for function and something a little better than "ratty looking".
Have:
Short reach Weinmann 405 brakes (recessed bolt, side pull, right side) calipers
Long reach Weinmann 735 brakes (non-recessed, side-pull, right side) calipers
Short-ish reach, Universal 68's (non-recessed, side pull, left side) calipers
New threadless, 1" Stronglight needle bearing headset
Used 36 hole Mavic MA-4 tubular rims
Sunshine Gyromaster hubs
NOS solid axle Sturmey Archer hubs - low flange 40/32 hole
some other odds and ends
PM me if you have brakes, but don't see something you'd like in trade posted. I do have some other things and am taking a guess at what might be appealing.
Side-pull, shortish reach (500 - 550mm), pull on right side, non-recessed brake calipers.
Q/R skewers - could use a set - for 100 spacing in front, and 120 or 126 in the rear. make not important. Hoping for function and something a little better than "ratty looking".
Have:
Short reach Weinmann 405 brakes (recessed bolt, side pull, right side) calipers
Long reach Weinmann 735 brakes (non-recessed, side-pull, right side) calipers
Short-ish reach, Universal 68's (non-recessed, side pull, left side) calipers
New threadless, 1" Stronglight needle bearing headset
Used 36 hole Mavic MA-4 tubular rims
Sunshine Gyromaster hubs
NOS solid axle Sturmey Archer hubs - low flange 40/32 hole
some other odds and ends
PM me if you have brakes, but don't see something you'd like in trade posted. I do have some other things and am taking a guess at what might be appealing.
__________________
In search of what to search for.
In search of what to search for.
Last edited by USAZorro; 01-23-10 at 08:37 PM.
01-22-10, 01:29 AM
#2794
N+1
Join Date: Sep 2004
Location: Ann Arbor, MI
Posts: 1,310
Bikes: A few
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
I added a bunch of available parts and removed many that are now gone.
Wanted:
46t chainring for 94mm BCD cranks
Porteur rack
TA Pro 5 vis crank arms or crankset Acquired !!!!!
30t or 46t TA, Sugino, etc. ring for above cranks
Thomson black 27.2x330mm seatpost-straight or setback
Tubus Tara low rider front rack
Nice LED dyno front light (Cyo, Edelux, supernova)
Time ATAC pedals
bike tools
Velo Orange stem mount Decaleur
stuff I can't remember
Have (and have pictures of everything):
*700c Hybrid Gary Fisher Zebrano framset. seat tube=19" effective top tube length is 56cm.
*XL Van Dessel Buzzbomb 29er full suspension frameset
*99' Schwinn Homegrown Factory frame in a 21" size (XL)
*Shimano M475 6 bolt disc hubs/WTB SpeedDisc rims. 26" wheelset
*Shimano XT Rear derailleur, 9 speed, only good for parts, cage is toast
*Lake Size 46 road shoes
*pair of Avid 160mm 6 bolt disc rotors with bolts
*home made 1/8" chain whip
*Cannondale seat bag
*Rear Surly Nice Rack off my commuter bike, all hardware and instructions included
*Park RW-3 Pedal/headset wrench, 15mm/36mm
*Shimano Light Action short cage (road) rear derailleur
*Brand New in package BMX brake levers, either white or black
*Weinmann crusier brake levers for canti or road brakes
*Cinelli Eubios Ergo drop bars, 26.0mm clamp, 44cm wide
*SRAM Attack 9 speed grip shifters.
*CycleOps remote for a Mag Trainer
*Shimano 200GS triple crank arms with all chainring bolts, 110/74mm BCD, 170mm arm length
*Dia Compe 287V aero brake levers for use with V-brakes/mechanical disc brakes. Barely used and complete
*Control Tech 1 1/8" threadless stem, 0 degree, 135mm, 25.4mm bar clamp
*Black Kalloy 26.8mm seatpost 300mm long
*SR Laprade silver single bolt seat post 25.2mm 220mm length
*SR Laprade silver single bolt seat post 26.0mm 220mm length
*SR Laprade silver single bolt seat post 26.6mm 220mm length
*SR Laprade silver single bolt seat post 27.2mm 195mm length
*SR Laprade silver single bolt seat post 26.8mm 190mm length
*Kalloy silver single bolt seat post 26.6mm 210mm length
*SR Custom dual bolt seat post 26.8mm 190mm length
*Cinelli 1R quill stem, 22.2mm insertion, 26.4mm bar clamp, 115mm reach
*Thomson 1 1/8" threadless stem, 140mm, 5 degree, 25.4mm clamp barely used
*Cane Creek 1-1/8" Stainless Steel Bearings for IS, ZS, S-1, S-2, S-3, S-6, S-8 MFG Part number is HSS2031
*3T Motus quill stem 110mm, 22.2mm quill insertion and 26.0mm bar clamp
*3T Motus quill stem 115mm, 22.2mm quill insertion and 26.0mm bar clamp
*Suntour Moutech Rear Derailleur, dated 1983,
*Suntour Moutech front Derailleur, dated 1983,
*SR MTE-100 adjustable setback seatpost. 26.4mm
*Zoom suspension seatpost, 27.2mm
*Shimano FH-RM40-8 cassette rear hub, 135mm spacing, 8-10 speed cass., skewer included 36h
*Unknown cassette hub, 130mm spacing, 8-10 speed, 32hole
*Specialized Cassette hub, 135mm spacing, 8-10 speed, 36 hole
*Maillard rear freewheel hub, 120mm spacing 36 hole
*Shimano Exage HB-RM50 front hub 32hole
*Shimano Exage HB-RM50 front hub 36hole
*Shimano C201 cassette rear hub, 135mm, 8-10 speed cassettes, 36 hole.
*Shimano STX-RC FH-MC38A cassette rear hub, 135mm, 8-10 speed, 32 hole.
*Shimano FH-RM30 cassette rear hub, 135mm,8-10 speed cassettes 36 hole.
*Shimano unmarked cassette rear hub. Hub is spaced at 135mm, but is for 6 or 7 speed hyperglide cassettes only32 hole
*front quick release hub with monster skewer included 100mm spacing 32hole
*front quick release hub with skewer included 100mm spacing 32hole
*Shimano Deore LX hubs Model #s: HB-M550 and FH-M550. 36h cassette hub. 100mm/135mm for UG or HG 6/7 speed shimano cass.
*Dia Compe MTB/road brake levers
*vintage Bull Moose MTN bar/stem.
*new Velo saddle
*Selle Royal Viper saddle used
*Terry Beetle ladies saddle covered with a suede Alcantara fabric.
*Ava stem and unmarked aluminum drop bars. Stem is 80mm long, 22.0 mm quill insertion and bars are 14.5” (37cm) wide.
*Giant Alloy drop bars, 26.0mm clamp, 42cm width
*Surly TRACK lockring
*Dia Compe brake levers for old school canti brakes or road brakes.
*New Cross top brake lever single only left side
*off brand 12-23 9 speed road cassette. Shimano splined and Shimano spaced.
*Unbranded black road compact double crankset with brand new bottom bracket. 170mm arms, 50/34t chainrings, and the rings are 110mm BCD.
*Dimension sealed bearing front track hub, used, 32 hole, 100mm spacing
*MTS-100 95mm stem and MTB-101 steel riser MTB bars
*Suntour XC Comp platform pedals
*Salsa steel quill road stem. 26.0mm bar clamp, 22.2mm quill insertion, and 150mm length
*Shimano Dura Ace FD-7400 braze on front derailleur
*Campagnolo Mirage rear cassette hub laced to a 700c Mavic Reflex Sup Clincher, 32hole, 130mm spacing for an 8 speed Campagnolo cassette
*Pearl Izumi Juice R2 road/tri shoes. They are a size 46 (US 12.5)
*Shimano Deore DX hub laced to a 26" Matrix MT. Aero rim front wheel only
*Specialized? (dust cover says so, but I can't be sure) 36 hole bolt on road/track hub, 100mm spacing
*Normandy Single fixed track hub, high flange 36 h 115mm
*Shimano 105 dual pivot recessed mount brake calipers. 39-49mm reach
*Suntour LePree front derailleur great shape 26.8mm clamp on
*Shimano Braze on 105 front derailleur, brand new
*Shimano LX bottom pull front derailleur model FD-M567 34.9 clamp
*Shimano Altus clamp on down tube shifters
*Planet bike CO2 pump
*Easton 1 1/8" threadless stem, 105mm length 6 degree rise with a 26.0mm bar clamp (road) new in box
*Kallay Uno 25.4mm quill stem 25.4mm clamp 90 degree 130mm length
*Kalloy Uno 25.4mm quill stem 25.4mm clamp 105 degree 130mm length
*Aluminum bar and stem, unbranded stem, Italian made Italmanubri Model Europa, stem is 80mm and bars are 37cm wide center to center
*Silver stem 25.4mm quill, 25.4mm clamp 135mm long
*Origin 8 Bullhorns oversize 31.8mm clamp 44cm wide brand
*Cannondale 700c road fork, 1" threaded, came from a 87' SR600 56cm frame. Aluminum legs with a steel steerer tube, Axle to crown=370mm steerer tube=172mm with 47mm of threads
*Lake road shoes size 42
*plus a whole lotta parts not listed
Wanted:
46t chainring for 94mm BCD cranks
Porteur rack
TA Pro 5 vis crank arms or crankset Acquired !!!!!
30t or 46t TA, Sugino, etc. ring for above cranks
Thomson black 27.2x330mm seatpost-straight or setback
Tubus Tara low rider front rack
Nice LED dyno front light (Cyo, Edelux, supernova)
Time ATAC pedals
bike tools
Velo Orange stem mount Decaleur
stuff I can't remember
Have (and have pictures of everything):
*700c Hybrid Gary Fisher Zebrano framset. seat tube=19" effective top tube length is 56cm.
*XL Van Dessel Buzzbomb 29er full suspension frameset
*99' Schwinn Homegrown Factory frame in a 21" size (XL)
*Shimano M475 6 bolt disc hubs/WTB SpeedDisc rims. 26" wheelset
*Shimano XT Rear derailleur, 9 speed, only good for parts, cage is toast
*Lake Size 46 road shoes
*pair of Avid 160mm 6 bolt disc rotors with bolts
*home made 1/8" chain whip
*Cannondale seat bag
*Rear Surly Nice Rack off my commuter bike, all hardware and instructions included
*Park RW-3 Pedal/headset wrench, 15mm/36mm
*Shimano Light Action short cage (road) rear derailleur
*Brand New in package BMX brake levers, either white or black
*Weinmann crusier brake levers for canti or road brakes
*Cinelli Eubios Ergo drop bars, 26.0mm clamp, 44cm wide
*SRAM Attack 9 speed grip shifters.
*CycleOps remote for a Mag Trainer
*Shimano 200GS triple crank arms with all chainring bolts, 110/74mm BCD, 170mm arm length
*Dia Compe 287V aero brake levers for use with V-brakes/mechanical disc brakes. Barely used and complete
*Control Tech 1 1/8" threadless stem, 0 degree, 135mm, 25.4mm bar clamp
*Black Kalloy 26.8mm seatpost 300mm long
*SR Laprade silver single bolt seat post 25.2mm 220mm length
*SR Laprade silver single bolt seat post 26.0mm 220mm length
*SR Laprade silver single bolt seat post 26.6mm 220mm length
*SR Laprade silver single bolt seat post 27.2mm 195mm length
*SR Laprade silver single bolt seat post 26.8mm 190mm length
*Kalloy silver single bolt seat post 26.6mm 210mm length
*SR Custom dual bolt seat post 26.8mm 190mm length
*Cinelli 1R quill stem, 22.2mm insertion, 26.4mm bar clamp, 115mm reach
*Thomson 1 1/8" threadless stem, 140mm, 5 degree, 25.4mm clamp barely used
*Cane Creek 1-1/8" Stainless Steel Bearings for IS, ZS, S-1, S-2, S-3, S-6, S-8 MFG Part number is HSS2031
*3T Motus quill stem 110mm, 22.2mm quill insertion and 26.0mm bar clamp
*3T Motus quill stem 115mm, 22.2mm quill insertion and 26.0mm bar clamp
*Suntour Moutech Rear Derailleur, dated 1983,
*Suntour Moutech front Derailleur, dated 1983,
*SR MTE-100 adjustable setback seatpost. 26.4mm
*Zoom suspension seatpost, 27.2mm
*Shimano FH-RM40-8 cassette rear hub, 135mm spacing, 8-10 speed cass., skewer included 36h
*Unknown cassette hub, 130mm spacing, 8-10 speed, 32hole
*Specialized Cassette hub, 135mm spacing, 8-10 speed, 36 hole
*Maillard rear freewheel hub, 120mm spacing 36 hole
*Shimano Exage HB-RM50 front hub 32hole
*Shimano Exage HB-RM50 front hub 36hole
*Shimano C201 cassette rear hub, 135mm, 8-10 speed cassettes, 36 hole.
*Shimano STX-RC FH-MC38A cassette rear hub, 135mm, 8-10 speed, 32 hole.
*Shimano FH-RM30 cassette rear hub, 135mm,8-10 speed cassettes 36 hole.
*Shimano unmarked cassette rear hub. Hub is spaced at 135mm, but is for 6 or 7 speed hyperglide cassettes only32 hole
*front quick release hub with monster skewer included 100mm spacing 32hole
*front quick release hub with skewer included 100mm spacing 32hole
*Shimano Deore LX hubs Model #s: HB-M550 and FH-M550. 36h cassette hub. 100mm/135mm for UG or HG 6/7 speed shimano cass.
*Dia Compe MTB/road brake levers
*vintage Bull Moose MTN bar/stem.
*new Velo saddle
*Selle Royal Viper saddle used
*Terry Beetle ladies saddle covered with a suede Alcantara fabric.
*Ava stem and unmarked aluminum drop bars. Stem is 80mm long, 22.0 mm quill insertion and bars are 14.5” (37cm) wide.
*Giant Alloy drop bars, 26.0mm clamp, 42cm width
*Surly TRACK lockring
*Dia Compe brake levers for old school canti brakes or road brakes.
*New Cross top brake lever single only left side
*off brand 12-23 9 speed road cassette. Shimano splined and Shimano spaced.
*Unbranded black road compact double crankset with brand new bottom bracket. 170mm arms, 50/34t chainrings, and the rings are 110mm BCD.
*Dimension sealed bearing front track hub, used, 32 hole, 100mm spacing
*MTS-100 95mm stem and MTB-101 steel riser MTB bars
*Suntour XC Comp platform pedals
*Salsa steel quill road stem. 26.0mm bar clamp, 22.2mm quill insertion, and 150mm length
*Shimano Dura Ace FD-7400 braze on front derailleur
*Campagnolo Mirage rear cassette hub laced to a 700c Mavic Reflex Sup Clincher, 32hole, 130mm spacing for an 8 speed Campagnolo cassette
*Pearl Izumi Juice R2 road/tri shoes. They are a size 46 (US 12.5)
*Shimano Deore DX hub laced to a 26" Matrix MT. Aero rim front wheel only
*Specialized? (dust cover says so, but I can't be sure) 36 hole bolt on road/track hub, 100mm spacing
*Normandy Single fixed track hub, high flange 36 h 115mm
*Shimano 105 dual pivot recessed mount brake calipers. 39-49mm reach
*Suntour LePree front derailleur great shape 26.8mm clamp on
*Shimano Braze on 105 front derailleur, brand new
*Shimano LX bottom pull front derailleur model FD-M567 34.9 clamp
*Shimano Altus clamp on down tube shifters
*Planet bike CO2 pump
*Easton 1 1/8" threadless stem, 105mm length 6 degree rise with a 26.0mm bar clamp (road) new in box
*Kallay Uno 25.4mm quill stem 25.4mm clamp 90 degree 130mm length
*Kalloy Uno 25.4mm quill stem 25.4mm clamp 105 degree 130mm length
*Aluminum bar and stem, unbranded stem, Italian made Italmanubri Model Europa, stem is 80mm and bars are 37cm wide center to center
*Silver stem 25.4mm quill, 25.4mm clamp 135mm long
*Origin 8 Bullhorns oversize 31.8mm clamp 44cm wide brand
*Cannondale 700c road fork, 1" threaded, came from a 87' SR600 56cm frame. Aluminum legs with a steel steerer tube, Axle to crown=370mm steerer tube=172mm with 47mm of threads
*Lake road shoes size 42
*plus a whole lotta parts not listed
Last edited by redxj; 02-03-10 at 12:47 AM.
01-22-10, 07:41 PM
#2795
Senior Member
GOT IT... THANKS ALL
Looking for a Suntour Cyclone II rear derailleur in long cage aka "GT"
Thank you,
Guy
Looking for a Suntour Cyclone II rear derailleur in long cage aka "GT"
Thank you,
Guy
__________________
Bikes: N + 1
Bikes: N + 1
Last edited by guygadois; 01-26-10 at 12:20 AM.
01-22-10, 08:11 PM
#2796
curmudgineer
Join Date: Dec 2009
Location: Chicago SW burbs
Posts: 4,417
Bikes: 2 many 2 fit here
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 263 Post(s)
Liked 112 Times
in
70 Posts
Need:
...
* Pair (front and rear) mid-80's DiaCompe sidepull brakes. Don't know the model number, but they showed up on almost every brand sold between 85 and 89. They have a slightly longer reach than a 39-49 Shimano of the period (maybe 55) and are nutted. Don't worry about brake shoes- those I've got- but otherwise must be complete.
Have: Stuff. Lots of stuff.
...
* Pair (front and rear) mid-80's DiaCompe sidepull brakes. Don't know the model number, but they showed up on almost every brand sold between 85 and 89. They have a slightly longer reach than a 39-49 Shimano of the period (maybe 55) and are nutted. Don't worry about brake shoes- those I've got- but otherwise must be complete.
Have: Stuff. Lots of stuff.
Last edited by old's'cool; 01-24-10 at 12:55 PM.
01-22-10, 09:13 PM
#2797
curmudgineer
Join Date: Dec 2009
Location: Chicago SW burbs
Posts: 4,417
Bikes: 2 many 2 fit here
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 263 Post(s)
Liked 112 Times
in
70 Posts
update have to trade/needs
Here's what I have:
Hombre Del Campo road bike saddle
Biopace 52Tx130 chainwheel
Biopace 42Tx130 chainwheel
28Tx74 chainwheel
36Tx110 chainwheel
Biopace 46Tx110 chainwheel
13x24 5sp chainwheel
14x28 6sp freewheel
flat handlebar silver alloy 25mm 55 cm wide
2" riser handlebar black alloy 25mm 58 cm wide
1 piece Mongoose crank 175mm
various skewers (front, rear, vintage french, newer Shimano)
14x32 5sp freewheel
14x26 6sp freewheel
SR short stem 25mm dia 55mm ht 40mm horiz. Lgth (less clamping hardware)
Univega 63cm Sporttour Cr-Mo frame (trade pending)
Univega branded SR crankset 170mm cranks, 118mm BCD, large chainring worn out, small 40T chainring usable condition.
Set late 70's early 80's Dia Compe side pull brakes (will only trade for alloy cantis that are compatible withmy Univega Viva Touring frame)
Pics of any of the above on request! (some already posted, see p.107-109 of this thread)
Here are my needs:
large handlebar bag inc. complete mounting hardware
narrow 27"/700C road fender set inc. complete mounting hardware
non-aero brake lever hoods
27" wide (1-1/8" or 1-1/4") alloy wheelset (English freewheel threaded)
26.8 alloy seatpost
Hombre Del Campo road bike saddle
Biopace 52Tx130 chainwheel
Biopace 42Tx130 chainwheel
28Tx74 chainwheel
36Tx110 chainwheel
Biopace 46Tx110 chainwheel
13x24 5sp chainwheel
14x28 6sp freewheel
flat handlebar silver alloy 25mm 55 cm wide
2" riser handlebar black alloy 25mm 58 cm wide
1 piece Mongoose crank 175mm
various skewers (front, rear, vintage french, newer Shimano)
14x32 5sp freewheel
14x26 6sp freewheel
SR short stem 25mm dia 55mm ht 40mm horiz. Lgth (less clamping hardware)
Univega 63cm Sporttour Cr-Mo frame (trade pending)
Univega branded SR crankset 170mm cranks, 118mm BCD, large chainring worn out, small 40T chainring usable condition.
Set late 70's early 80's Dia Compe side pull brakes (will only trade for alloy cantis that are compatible withmy Univega Viva Touring frame)
Pics of any of the above on request! (some already posted, see p.107-109 of this thread)
Here are my needs:
large handlebar bag inc. complete mounting hardware
narrow 27"/700C road fender set inc. complete mounting hardware
non-aero brake lever hoods
27" wide (1-1/8" or 1-1/4") alloy wheelset (English freewheel threaded)
26.8 alloy seatpost
Last edited by old's'cool; 01-22-10 at 09:21 PM. Reason: added seatpost
01-22-10, 11:08 PM
#2798
Senior Member
Join Date: Dec 2008
Posts: 659
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Want: Campy ergo bits. Condition unimportant.
Last edited by stausty; 01-23-10 at 12:11 AM. Reason: Apparently the brake calipers I have do reach. 3 weeks from a Ph.D. and I didn't figure to loosen the nut a bit more.
01-23-10, 09:30 AM
#2799
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,735
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2155 Post(s)
Liked 3,405 Times
in
1,206 Posts
Sorry, Old's Cool- don't have the canti's you're looking for.
But I did find a set of NOS DiaCompe sidepulls.
They came with brandy new levers and turkeys that I won't be using, so if anyone's interested...
But I did find a set of NOS DiaCompe sidepulls.
They came with brandy new levers and turkeys that I won't be using, so if anyone's interested...
01-23-10, 10:38 AM
#2800
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,927 Times
in
1,492 Posts
what kind of brakelevers? do they have hoods? I know there were not many that hoods and turkey levers and even fewer that were aero.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk