Your Catch of the Day / Saved from the Dump!
#6426
Senior Member
Join Date: Dec 2010
Location: Colorado
Posts: 93
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
It has tricolor 600 and a tange falcon headset. The old Bridgestone catalogs on Sheldon's site are so great! as a road biker, you just have to love being elitist when you pull on your spandex. The old catalogs are just that. I have given up on hoarding brifters, so these will be on ebay.
#6427
Bicycle Repair Man !!!
Well... the '37 Raleigh has yet to appear but my friend did bring me another bike from 1963 that also belonged to her grandfather and it too is English and was made by Raleigh.
It has some patina to spare...
It has some patina to spare...
Last edited by Sixty Fiver; 04-11-11 at 10:58 PM.
#6428
Bicycle Repair Man !!!
Consider this the "before"...
I have already replaced the cables and housings, changed out the rear cog for a bigger one, and installed a fresh chain and a nice looking chain guard... after giving the hub a sip of oil I took it out for a ride and it rolls straight and true and is in excellent mechanical condition.
And nothing was seized which speaks to a bike that looks scruffy but was well maintained... and ridden a lot if you look at the pedals.
I have already replaced the cables and housings, changed out the rear cog for a bigger one, and installed a fresh chain and a nice looking chain guard... after giving the hub a sip of oil I took it out for a ride and it rolls straight and true and is in excellent mechanical condition.
And nothing was seized which speaks to a bike that looks scruffy but was well maintained... and ridden a lot if you look at the pedals.
#6429
Senior Member
Join Date: Jul 2009
Posts: 970
Bikes: 1989 Dahon Stainless Classic III Folder - 1990 Dahon Mariner Classic III Folder - 2005 Dahon Jetstream P8 Full Suspension Folder
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I was painting with a relative and he mentioned an old bike out back. It was old when he was a kid and he's 28 now. I know nothing about this stuff, I just like to ride. Can one of you bright guys help out here? It says Batavus and intercycle, on the downtube, and it is a folding bike.
Looks like a Bata Fold
Here are some similar ones.
https://www.foldingcyclist.com/Batavu...ding-bike.html
https://www.bikeforums.net/showthread...-fold-the-stem
https://www.flickr.com/photos/3987529...n/photostream/
Looks like a decent folder from the 60s.
#6430
Chainstay Brake Mafia
Join Date: Mar 2011
Location: California
Posts: 6,007
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Likes: 0
Liked 11 Times
in
10 Posts
finally got some decent pics of this $25 CL steal i got a few weeks back.. not exactly C&V since it's from 1999 but it is 4130 cr-mo steel at least
#6431
No, your OTHER left!!
Join Date: Dec 2010
Location: Central Virginia, USA
Posts: 539
Bikes: 2 motos and a schwinn (road bikes more or less)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thats a sweet find for $25 for sure!! Get a load of the teeth on that big ring wow!!
andy
andy
#6432
Senior Member
Join Date: Nov 2008
Location: New York Metro Area
Posts: 3,863
Bikes: '02 Litespeed, '99 Bianchi Alfana. '91 Fuji Saratoga, '84 Peugeot Canyon Express, '82 Moto GR, '81 Fuji America, '81 Fuji Royale; '78 Bridgestone Diamond Touring, '76 Fuji America, plus many more!
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 181 Post(s)
Liked 224 Times
in
127 Posts
"finally got some decent pics of this $25 CL steal i got a few weeks back.. not exactly C&V since it's from 1999 but it is 4130 cr-mo steel at least "
Brifters?
OMG! That is incredible for $25!!!
https://bike.jaxed.com/cgi-bin/bike.c...o=d&submit=+GO+
Alecw35 would have negotiated him down to $20, though, with a new set of tires!
Brifters?
OMG! That is incredible for $25!!!
https://bike.jaxed.com/cgi-bin/bike.c...o=d&submit=+GO+
Alecw35 would have negotiated him down to $20, though, with a new set of tires!
Last edited by cycleheimer; 04-12-11 at 12:28 PM.
#6433
Chainstay Brake Mafia
Join Date: Mar 2011
Location: California
Posts: 6,007
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Likes: 0
Liked 11 Times
in
10 Posts
yeah i had to use a ton of solvent to de-gunk the brifters, and the drivetrain is pretty trashed.. but for $25 i sure wasn't complaining. it even fits me!
cool CL search tool btw
Alecw35 would have negotiated him down to $20, though, with a new set of tires!
cool CL search tool btw
Last edited by frantik; 04-12-11 at 12:32 PM.
#6435
Senior Member
Join Date: Jun 2008
Location: Atlanta
Posts: 2,978
Bikes: Cannondale T700s and a few others
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
$31 for a 12-26 cassette
Crank rings are not horrible price.
You will have problems out of those shifters again. The 8 speed are not horrible to disassemble enough to clean them better.
Loosen the set screw on the pivot pin and drive the pivot out to get the actual lever out of the body. There is a spring in there so pay attention to who it goes in.
Now the Allen bolt on the front needs to come off. There is a return spring under it. Pay attention to the orientation of the spring and any spacers. On assembly you will line up the holes the spring catches on and then need to turn it while holding your tongue just right to get that outer cover back on.
push the small lever over and there is a Philips head screw. The whole assembly will now put out of the brake lever and expose the workings.
Soak it in carberator cleaner and flush it with brake cleaner and get all the little pawls freed up. Oil up the pawls with machine oil (3in1). light grease where they ride on the cams. Work some machine oil in between anything that moves. Should be fine.
#6437
Senior Member
Join Date: Jun 2008
Location: Atlanta
Posts: 2,978
Bikes: Cannondale T700s and a few others
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
When it cools down that grease will thicken up and that's when you will have the problem come back. The pawl that causes most of the problem you cant get a straight shot at with them assembled.
#6438
Senior Member
Join Date: Jun 2008
Location: Atlanta
Posts: 2,978
Bikes: Cannondale T700s and a few others
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I ran across an interesting bike in my wife size. Its a Grant Peterson era 1992 (think) Bridgestone XO-2. This was sold as a 26 inch wheel road bike with 1.4inch Richie Tom Slick tires. The geometry is more road/touring then Mountain. full set of braze ons except mid fork. The frame is 43cm seat post and 51cm top tube. It came with Dirt drops as best I can tell despite Sheldon say most of the XO bikes coming with Mustache bars.
Its a bit beat up but its the frame that counts. Its missing its original Dirt drops but It had a set of Bull Moose bars on it and a Regal Girraldi saddle. I think the rims are original and it has a brand spanking new set of Kenda Kwest tires on it. Somebody was trying to convert it to single speed and laced the back wheel up to a mid 80's Dura Ace threaded hub. That was a neat find.
Its a bit beat up but its the frame that counts. Its missing its original Dirt drops but It had a set of Bull Moose bars on it and a Regal Girraldi saddle. I think the rims are original and it has a brand spanking new set of Kenda Kwest tires on it. Somebody was trying to convert it to single speed and laced the back wheel up to a mid 80's Dura Ace threaded hub. That was a neat find.
Last edited by Grim; 04-14-11 at 04:49 PM.
#6439
French threaded
Join Date: Aug 2008
Location: Portland, OR.
Posts: 1,199
Bikes: many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Saved from the Dump today.
Maillard 700 team issue rear hub -VGC
36 almost new 299mm straight gauge DT spokes
36 almost new brass nipples
Did not save from the dump.
Araya 27 1W rim with one inch hop in it.
Maillard 700 team issue rear hub -VGC
36 almost new 299mm straight gauge DT spokes
36 almost new brass nipples
Did not save from the dump.
Araya 27 1W rim with one inch hop in it.
#6440
Senior Member
Join Date: Dec 2008
Location: AK/IL for a smidge
Posts: 176
Bikes: 1983 Schwinn Paramount, 2006 Cannondale Six13 Pro, 1987 Schwinn Voyageur 1986 Fuji Regis, SSR Fixed Gear
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I would just like to add to the previous Rossin post first, that you couldn't talk the seller down to half the asking price is a disappointment for a Scotsman. I guess we'll have to let you slide this time. But don't make a habit of it! Just a bit of fun that. I'm just jealous, that's an exceptional buy and deserves a big heaping of haggis.
Now that that's out of the way, this Miyata Gran Touring pre-dates the 'vintage miyata' catalogs that end in '81. The owner said that he believes it's an '79. It obviously is older as it has Tange champion Cromo tubing. I just got it home and it qualifies as a boat anchor, none-the-less will be a very fun project.
Now that that's out of the way, this Miyata Gran Touring pre-dates the 'vintage miyata' catalogs that end in '81. The owner said that he believes it's an '79. It obviously is older as it has Tange champion Cromo tubing. I just got it home and it qualifies as a boat anchor, none-the-less will be a very fun project.
The original rear rack you have on there scared me because of the six bolts holding it together, I was afraid it would collapse under any weight. Enjoy the ride though!
#6442
Senior Member
Join Date: Oct 2009
Location: New England
Posts: 1,001
Bikes: Trek 1.1
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 5 Times
in
2 Posts
Picked up a Schwinn LeTour Today
Another lucky find from the dump, today. Needs a bit of work but this time I had the good sense to put air in the tires and make sure it tracked right. Last time I had to do a great amount of work before I had a successful ride on a bike I bought at a garage sale.
This one has a bent small chainring which I think I can fix but otherwise nothing serious.
As you can see whoever owned this one certainly could not be considered guilty of over-lubricating the chain.
This one has a bent small chainring which I think I can fix but otherwise nothing serious.
As you can see whoever owned this one certainly could not be considered guilty of over-lubricating the chain.
#6443
weapons-grade bolognium
Join Date: Dec 2008
Location: Across the street from Chicago
Posts: 6,346
Bikes: Battaglin Cromor, Ciocc Designer 84, Schwinn Superior 1981
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 985 Post(s)
Liked 2,379 Times
in
892 Posts
Nertz!!!!! just missed out on a nice late 80's Schwinn Prelude for $50 at a rummage sale. It had a Turbo saddle and some other nice upgraded parts. Another guy got to it 5 seconds before me. Oh yeah, it was my size and red.
#6445
Senior Member
Join Date: Oct 2006
Location: Cleveland,Ohio
Posts: 2,766
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
The bars were swapped out on that XO-2. I have one and they came with moustache bars, Deore thumb shifters and mountain grips and brake levers.
I ran across an interesting bike in my wife size. Its a Grant Peterson era 1992 (think) Bridgestone XO-2. This was sold as a 26 inch wheel road bike with 1.4inch Richie Tom Slick tires. The geometry is more road/touring then Mountain. full set of braze ons except mid fork. The frame is 43cm seat post and 51cm top tube. It came with Dirt drops as best I can tell despite Sheldon say most of the XO bikes coming with Mustache bars.
Its a bit beat up but its the frame that counts. Its missing its original Dirt drops but It had a set of Bull Moose bars on it and a Regal Girraldi saddle. I think the rims are original and it has a brand spanking new set of Kenda Kwest tires on it. Somebody was trying to convert it to single speed and laced the back wheel up to a mid 80's Dura Ace threaded hub. That was a neat find.
Its a bit beat up but its the frame that counts. Its missing its original Dirt drops but It had a set of Bull Moose bars on it and a Regal Girraldi saddle. I think the rims are original and it has a brand spanking new set of Kenda Kwest tires on it. Somebody was trying to convert it to single speed and laced the back wheel up to a mid 80's Dura Ace threaded hub. That was a neat find.
#6446
Bicycle Repair Man !!!
Scored a pretty much mint Norco road bike today... with a 47 cm frame in what is pretty close to Celeste and white.
But the cool part... because I did not know Norco made these.
It is a Terry like model with a 700c rear and 520 front wheel, Tange Infinity frame, and Shimano light action 6 speed.
One little girl is going to be so happy when she sees her new road / touring bike.
The crank is set up as a 42/50 double but can be fitted as a triple if need be and I swapped out the 13-24 block for a 14 -28.
Pics to follow.
But the cool part... because I did not know Norco made these.
It is a Terry like model with a 700c rear and 520 front wheel, Tange Infinity frame, and Shimano light action 6 speed.
One little girl is going to be so happy when she sees her new road / touring bike.
The crank is set up as a 42/50 double but can be fitted as a triple if need be and I swapped out the 13-24 block for a 14 -28.
Pics to follow.
#6447
Chainstay Brake Mafia
Join Date: Mar 2011
Location: California
Posts: 6,007
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Likes: 0
Liked 11 Times
in
10 Posts
This was a thrilling CL catch..
So, guy posted up this trek 610 with pics which show Reynolds 531 and shimano 600 grouppo:
i'm like.. well sure i'll name my offer lol..i email him an hour after he posts it with a low ball $20 offer and ask how much he was thinking.. 3 hours later i hadn't gotten a reply so I email again and tell him if i was too low please let me know what he thinks is fair
That was last night.. then today in the afternoon i havent heard back, so i figure he's like "screw that low ******".. so i email from a second acct! this time I don't make a specific offer, just ask to come look at it so i can make an offer.
So a little bit later i get a reply back to my lowball offer, seller is asking for $100, which I immediately accept as soon as i read it, (about 30 mins after he sent it). he didn't give a phone # so I'm clicking my refresh in gmail every 5 minutes, but no reply....
About hour and a half later, the second account gets an email.. now the seller has multiple offers for over $100 and wants $180 or best offer! I politely tell him i could only offer around $100 and thank him for his time. Even $100 was a bit more than I should spend but I figure the frame alone is worth that so I could make my money back.
So.. i still hadn't gotten a response to the first account, and knowing what I know from the 2nd account, I figure he's decided to not sell it for $100. As a last ditch attempt, I play the old "truth gambit" and send an email.. I say that I'm sure he will get offers for more than $100, but I can only pay $100 and could really use the parts for my bike build. (which is sorta true.. I plan on using the grouppo on my GT force since i hate the brifters that came on it) I then tell him the bike would probably be worth around $400 with the wheels, depending on condition and how much patience he has. The email was one part "I'm the honest guy, sell it to me please" and one part "if i'm not gonna get it for cheap, NO ONE IS!"
At this point I figure I'm not going to get the bike.. and actually saw another bike that interested me to use for parts. It wasn't nearly as sweet of a deal, but I was really close to calling this other person, and then my phone rings.. it's the guy with the trek saying he will sell it for $100!
it's now sitting in my front room, w00t! 49cm, way too small for me, but very nice frame that i will strip the parts from and either build up with shimano rsx grouppo from my $25 GT Force, or just sell the frame to make my $ back
i never would have thought to use the "truth gambit" if not for Bikeforum and C&V, so, thanks bikefo!
So, guy posted up this trek 610 with pics which show Reynolds 531 and shimano 600 grouppo:
I have a blue Trek 610 bike for sale.
The two wheels with tires were stolen in the parking lot right after a week we moved here.
It is a classic Trek 610 bike, used to be good working conditions.
Don't know how much it worths without wheels.
Just name your offer and take it.
The two wheels with tires were stolen in the parking lot right after a week we moved here.
It is a classic Trek 610 bike, used to be good working conditions.
Don't know how much it worths without wheels.
Just name your offer and take it.
That was last night.. then today in the afternoon i havent heard back, so i figure he's like "screw that low ******".. so i email from a second acct! this time I don't make a specific offer, just ask to come look at it so i can make an offer.
So a little bit later i get a reply back to my lowball offer, seller is asking for $100, which I immediately accept as soon as i read it, (about 30 mins after he sent it). he didn't give a phone # so I'm clicking my refresh in gmail every 5 minutes, but no reply....
About hour and a half later, the second account gets an email.. now the seller has multiple offers for over $100 and wants $180 or best offer! I politely tell him i could only offer around $100 and thank him for his time. Even $100 was a bit more than I should spend but I figure the frame alone is worth that so I could make my money back.
So.. i still hadn't gotten a response to the first account, and knowing what I know from the 2nd account, I figure he's decided to not sell it for $100. As a last ditch attempt, I play the old "truth gambit" and send an email.. I say that I'm sure he will get offers for more than $100, but I can only pay $100 and could really use the parts for my bike build. (which is sorta true.. I plan on using the grouppo on my GT force since i hate the brifters that came on it) I then tell him the bike would probably be worth around $400 with the wheels, depending on condition and how much patience he has. The email was one part "I'm the honest guy, sell it to me please" and one part "if i'm not gonna get it for cheap, NO ONE IS!"
At this point I figure I'm not going to get the bike.. and actually saw another bike that interested me to use for parts. It wasn't nearly as sweet of a deal, but I was really close to calling this other person, and then my phone rings.. it's the guy with the trek saying he will sell it for $100!
it's now sitting in my front room, w00t! 49cm, way too small for me, but very nice frame that i will strip the parts from and either build up with shimano rsx grouppo from my $25 GT Force, or just sell the frame to make my $ back
i never would have thought to use the "truth gambit" if not for Bikeforum and C&V, so, thanks bikefo!
Last edited by frantik; 04-16-11 at 08:19 PM.
#6448
Bicycle Repair Man !!!
NOS... no model name on the frame.
60.00... and it came with a nicer spare front wheel with a 105 hub laced to an Araya rim.
60.00... and it came with a nicer spare front wheel with a 105 hub laced to an Araya rim.
#6449
bklyncycle
Join Date: May 2010
Posts: 38
Bikes: Zeus (Road) , LeJuene (Track), Garbage (Mountain Bike)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
THANKS!
A couple of minor modifications:
I changed the pedals ($10.00) and put on some aero levers ($11.00).
It hurt to spend the $21.00 on a $7.00 bike but, what can I say?