DA Pulley
10-29-09 | 05:04 PM
#3
Senior Member
Joined: May 2008
Posts: 590
Likes: 1
From: Beverly Hills, MI
Bikes: '72 Fuji Finest, '80 Austro-Daimler Inter 10, '06 Fuji Team Issue, '06 Salsa Las Cruces, Nashbar Frame single speed
Those are not the original pulleys. You can probably find some similar pulleys to those on ebay.
10-29-09 | 05:04 PM
#4
Senior Member
Joined: Jan 2005
Posts: 232
Likes: 1
From: Central Ohio
Bikes: Franklin Custom Road, Frejus TDF,Bianchi CromoLite Reparto Corse, Trek 470, Specialized Hardrock
Any pulley should work. You may need a tiny washer or two to "widen" the space between the cages, sounds weird but if you have the problem you'll understand.
I replaced my 7402 pulleys with some AL ones from Performance (!?) and they work fine.
I still have the originals if you're interested.
I replaced my 7402 pulleys with some AL ones from Performance (!?) and they work fine.
I still have the originals if you're interested.
10-29-09 | 06:16 PM
#6
those look like Carmichaels (aftermarket sealed-bearing pulleys) which are NLA, but Performance usually has their house brand (Forte) of similar pulleys in both 11t and 10t on hand.
Your LBS may have some, too.
Your LBS may have some, too.
